freze makineleri kullanılmış satılık

Door lock milling machine Three separate motors are available for machining the lock body Horizontally and vertically adjustable for different locking systems You can call or write to us. We can speak and write German and Russian. You can also send messages in English 12.6.1.

Number of milling agregates: 3 St.: 300 x 120 mmweight of the machine ca.: 140 kgMotor output: 1,5 kWSpeed: 12000 U/min.stroke: 120 mmclamping range: 190 x 160 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cut Mill automatic feed You can call or write to us. We can speak and write German and Russian. You can also send messages in English 10.1.6

x-travel: 900 mmy-travel: 630 mmz-travel: 500 mmtable-size: 1200 x 600 mmspindle taper ISO: 40 turning speed range: 20 - 6300 U/minfeeds longditudinal/cross/vertical: 2 - 4000 mm/minrapid motion -longitudinal/cross/vertical: 10/10/8 m/minnumbers of positions in the tool changer: 22 quill stroke: 100 mmtotal power requirement: 20 kWweight of the machine ca.: 5,7 tdimensions of the machine ca.: 4 x 3 x 2,4 melectronic hand wheel: cooling equipment: Please notice:We would be happy to make you a free offer. However, please understand that weonly process inquiries with complete address details.in condition from seller!33.01 392with CEE plug and cable3-D trace control Heidenhain TNC 42522 fold toll changercolour graphicsvertical head with hydraulic tool clampingfix tableThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Steal Handrail milling cutter D = 130 x 62 x 30mm HS G&-5072-M36LJ

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Profile milling cutters D = 125 x 50 x 30mm HS G&-5071-M36lJ

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Code: 0106 Brand: OMEC - ITALY Model: 650-M Dovetailing machine Technical characteristics: Installed power on board machine Kw 0,75 Max working width mm 420 Center to center of indents mm 25-40-50-80 Overall dimensions: mm 800 x 720 x 1320 h Weight kg 130

x-travel: 10000 mmy-travel: 1100 mmz-travel: 1700 mmControl: Heidenhain type: TNC 155 Tool changer: 30 table surface area: 10000x1000 mmchip conveyor: universal head: table height over floor: 800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 2540 mm, 35 mm

SPECIFICATIONS: Table size mm: 2540 x 740 Spindle diameter mm: 35 Spindle inclination: 0°-45° Speed: 3000/10000 rpm Voltage: 3800 volts Equipped with: - Electronic programmer for spindle stroke and spindle inclination - 4-roller feed

x-travel: 800 mmy-travel: 500 mmz-travel: 610 mmControl: Fanuc type: 18 M table surface area: 1000x500 mmTool changer: 24 spindle taper ISO: 40 turning speeds: 8000 U/mintotal power requirement: kWweight of the machine ca.: 5,8 tdimensions of the machine ca.: 4,2x3,3x3,15 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Swivel spindle milling machine SCM Samco Type T 40 I Machine No. KK/038438 Year of construction 1997 Includes 3 rollers of feed Includes table extension Swivel cutter head included Spindle diameter 30 mm Spindle swivel 90° - 45° Motor power 3 kW Engine Brake Spindle left clockwise Table size 870 mm x 560 mm Spindle clamping length 135 mm Maximum tool diameter 180 mm Suction nozzle diameter 120 mm Speed 1400/3500/6000/8000 rpm. Weight with feed approx. 250 kg

x-travel: 1200 mmy-travel: 600 mmz-travel: 800 mmControl: Heidenhain type: TNC 426 table surface area: 1250x630 mmworkpiece weight: 1000 kgTool changer: 24 spindle taper ISO: 40 turning speeds: 30-8000 U/mintotal power requirement: kWweight of the machine ca.: 7,5 tdimensions of the machine ca.: 4,2x3,3x3,15 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Kettenstemmer (chain Mortiser) carpentry: â?¢ handy Kettenstemmer with strong pulling engine â?¢ Adjustable depth stop to 125 mm â?¢ Adjustable RIP fence 25-180 mm â?¢ Chain guide with integrated lubrication â?¢ Housing, handles and base plate made of sturdy die-cast aluminium â?¢ Security Beidhandschalter for the protection of the user â?¢ Including high-quality chain set Technical specifications: â?¢ wattage 1350 Watts â?¢ Idling speed min-1 3,400 â?¢ Maximum mortising depth 100 mm â?¢ Press width 40 mm â?¢ Dimensions 261 x 320 x 382 mm â?¢ Weight 10 kg Scope of delivery: â?¢ power cord 5 m â?¢ RIP fence â?¢ Open end wrench â?¢ Allen key â?¢ Chain set (sword, chain, grea ...

x-travel: 650 mmy-travel: 540 mmz-travel: 620 mmControl: Heidenhain type: iTNC 530 table surface area: 800x540 mmTool changer: 20 Posspindle taper ISO: 40 turning speeds: 50-10.000 U/minCooling through the spindle: 20 barworkpiece weight: 600 kgtotal power requirement: 14 kWweight of the machine ca.: 4,2 tdimensions of the machine ca.: 2,4x2,1x2,9 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

According to the PDF prospectus!

Table dimensions: . mmMotor output: 9 kWSpindle diameter: . mmreus: U/minWeight: kgYear: 0The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

) Mortising depth 100 / 150 mm-) nominal no load speed 1/min - 4050) rated power 2500 W-) weight 8.7 kg-) universal motor 230 V / 50 Hz transverse stop best. No. 200954 1 Allen key 4 mm best. No. 093074 1 Allen key 8 mm best. No. 093070 1 connection cable 10 m best. No. 087612 â?¾Zapfenlöcher â?¾Materialeinsatz such as: Solid wood, laminated wood â?¾Ergonomische handle and switch arrangement - for safe, efficient and energy-saving work. â?¾Geringes weight - ideal for use on construction sites. â?¾Extrem powerful motor - for high efficiency and saving time. â?¾Einzigartiges light-weight 8.7 kg. â?¾Der long cross fence holder with large adjustment range allows you to work on large-scale wood. â?¾DAS clamping system in the LS 103 EC allows a quick chain change. Even a tighten ...

x-travel: 1200 mmy-travel: 600 mmz-travel: 800 mmControl: Heidenhain type: TNC 426 table surface area: 1250x630 mmworkpiece weight: 1000 kgTool changer: 24 spindle taper ISO: 40 turning speeds: 30-8000 U/mintotal power requirement: kWweight of the machine ca.: 7,5 tdimensions of the machine ca.: 4,2x3,3x3,15 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Kervenfräse (carpentry): The machine is almost as good as new, and there is also a warranty on the machine! Technical data "MAFELL Kervenfräse ZK 115 EC": -) Smoothing depth: 0-83.5 mm ) Milling tool - standard: 150 x 115 mm mm -) Swivelling range: 0-60 ° -) Nominal no-load speed: 4050 1/min -) Rated power: 3000 W ) Weight (with standard milling head): 21.1 kg ) Universal motor: 230 V / 50 Hz Scope of delivery: 1 Kervenfräskopf, complete, Ã? 150 x 115 mm 1 RIP fence 1 spanner 10 mm 1 wrench, Torx T-15 1 connection cable 10 m

module: Diameter: mmboring diameter: mmSprocket cutterDIN3968 Parting 65RO36 R1 EK 20°The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Code: 0650 Brand: OMEC - ITALY Model: 750 - CE Standard Automatic dovetailing machine for dovetail joints on drawers and different parts of furniture - CE Standard Technical data: Working width mm 480 Drawer front parts thickness mm 60 Spindle speed rpm 18500 Spindle motor power Hp 1,5 Tip translation motor power Hp 1,5 Overall dimensions mm 1200 x 800 x 1300 h Weight kg 350

Table dimensions: 680 x 1.000 mmMotor output: 4 kWSpindle diameter: 30 mmreus: 3.000/4.500/6.000/8.000 U/min: 200 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC milling machine 6090 INDUSTRY 2.0 600x900 ✅ Discover the quality benefits of the INDUSTRY 2.0 Series The INDUSTRY 2.0 series differs from the standard series by using the best and most precise motors in its class and the power transmission, which significantly increase the machining capabilities of the machine, making it the most industrialized series in this price range. ✅ The INDUSTRY 2.0 series CNC milling plotter with a working surface of 600x900mm and a clearance in the Z axis equal to 300mm is equipped with an electrospindle with a power of 6kW and 24000 rpm. on a ceramic bearing. The working table of the machine is made in hybrid technology - it has vacuum sections and subsections for automatic, non-invasive clamping of the processed material, as well as T-Groove slots for manual clamping. Standard equipment ✅ Hybrid table, i.e. vacuum, enabling non-invasive ...

Table dimensions: 2.400 x 800 mmMotor output: 5/6 kWSpindle diameter: 30 mmreus: 3/4,5/6/9000 U/minWeight: 900 kgtable height: 850 mmheight adjustment: 150 mmtool taper: MK 5 : 270 mm: elektrisch : elektrisch swivellable: -5 bis +45 °: Ja : Ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC Wood Milling Machine 6KW 1300x2500 CNC milling machine 1325 INDUSTRY 2.0 6KW 1300x2500 ◼Invest in the quality of the INDUSTRY 2.0 Series The INDUSTRY 2.0 series differs from the standard series by using the best and most precise motors in its class and the power transmission, which significantly increase the machining capabilities of the machine, making it the most industrialized series in this price range. ◼The INDUSTRY 2.0 series CNC milling plotter with a working surface of 1300x2500mm and a clearance in the Z axis of 300mm is equipped with an electrospindle with a power of 6kW and 24000 rpm. on a ceramic bearing. The working table of the machine is made in hybrid technology - it has vacuum sections and subsections for automatic, non-invasive clamping of the processed material, as well as T-Groove slots for manual clamping. ◾Hybrid table, i.e. vacuum, enabling non ...

Table dimensions: 2.000 x 880 mmMotor output: 4,7 / 5,7 kWSpindle diameter: 30 mmreus: 3/4,5/6/9/12.000 U/minWeight: ca. 675 kgswivelling range: 45 Grad: Ja : Ja tool taper: MK5 height adjustment: 125 mm mmDust suction hood: 125/100 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

TechnologieCNC Milling Plotter CNC 1530 INDUSTRY 2.0 ◼Invest in the quality of the INDUSTRY 2.0 Series The INDUSTRY 2.0 series differs from the standard series by using the best and most precise motors in its class and the power transmission, which significantly increase the machining capabilities of the machine, making it the most industrialized series in this price range. ◼The INDUSTRY 2.0 series CNC milling plotter with a working surface of 1500x3000mm and a clearance in the Z axis equal to 300mm is equipped with an electrospindle with a power of 6kW and 24000 rpm. on a ceramic bearing. The working table of the machine is made in hybrid technology - it has vacuum sections and subsections for automatic, non-invasive clamping of the processed material, as well as T-Groove slots for manual clamping. Covscsx ◾Hybrid table, i.e. vacuum, enabling non-invasive fixation of th ...

Table dimensions: 800 x 1.180 mmMotor output: 5/6 kWSpindle diameter: 30 mmreus: 3/4,5/6/9.000 U/minheight adjustment: 150 mm: Ja : Nein The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.