Aksesuar -lar

DECOILER  design: twin reel   coil weight max.: 0.5 to  max. diameter of coil: 1600 mm

DECOILER  design: twin reel   coil weight max.: 0.5 to  max. diameter of coil: 1600 mm

Dc motor Article number: 27-06-131 Manufacturer: BBC Very good general condition Engine ran without defects until dismantling of the machine suitable for Weisser Multivertor, among others Shipping time: All rights reserved. Year of construction: ca.1982 L x W x H: approx. 1200x800x1300mm Weight: approx. 400kg Speed: Power: 900rpm 15kW 1260rpm 20kW 36ßßrpm 20kW Power supply: 380 volts Other accessories on request Price and other technical data on request

Tube spice MK 5 125-200 mm NEW

Electronic length stop BOMAR type ROLBO Useful length: 3000 mm Useful table width: 330 mm tAdjustable heigth from 500 mm to 1100 mm Total table length: 3450 mm 8 memory lengths possible Voltage: 220 V mono

Article number: 27-06-063 Manufacturer: Chip Anne, Lid Mint condition Custom-fit seat and paint finish in RAL according to customer requirements Shipping time: All rights reserved. Year of construction: NEW L x W x H: approx. 1000x1000x200mm Weight: approx. 4kg suitable: FP2 & FP3 FP2 Active Digital FP3 Active Digital FP2 Infinitely variable FP3 Infinitely variable

No. 3487 & 3489: 1 gebr. Additional table (suitable for rigid table type 2710 ) for lid - slanted bed models FP 2/3 L/LV FP 41/42 Fabr. DECKEL, type 2410, with weight approx. 180 kg Arb.-Ber.: Clamping surface 1200 x 370 mm,

Cable towing energy chain 1 Height - 100 mm Width - 350 mm Length - 4500 mm Cable towing energy chain 2 Height - 80 mm Width - 120 mm Length - 3000 mm

mechan. Oil Mist Separators - Volume flow: up to 1200 m³/h - Electrics: 3-Ph. 400 V - 50/60 Hz - Power: 1.5 kW (IE3) - Current: 2.3 A - Protection class: IP54 - Noise: 70 dB

Fixed and walking lunettes for FAT Poles TUR 560 and TUR 630

Accessories for FMB bar feeder magazines Items D20/60 27.16 2050-693F D20/60 40.17 2050-693F D25/60 41.16 2050-695F 2060-093 MD19 11/17 (3 pieces)

As good as new reversible base jaws Insert: Three-jaw chuck with helical toothing, also power chucks. Manufacturer: Three-jaw chuck FORKARDT-F400; RÖHM-Duro-400→ (FOKARDT; ROHM; SCHUNK; KITAGAWA) Name of the base jaws: for example: MFG 400; SFG400 Three-jaw wedge rod chuck ø 400mm: Hand chuck F400; F500L DURO400; DURO 500 Rota-S 400; Rota-S500 THW500 F B= width; H height; L= Length; S=N_backe; N= cross groove for interchangeable jaws; La= hole spacing; J=Za= tooth spacing; S= groove for top jaw or base jaw W = 45 mm H = 55 mm L = 160 mm N = 30mm S = 18mm La= 60mm Thread M16 x 1.5 Weight approx. 9-10 Kg /set

diameter: verschiedene mmcondition: teilweise ohne Verpackung weight: ca. 1,4 t: . : 2,20 Euro /kg Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CONTROLS  conventional TECHNICAL SPECIFICATION  Working length: 250 mm  plate thickness (max.): 1 mm

2 New adapter cables for DRO Heidenhain 2 universal extension cables DRO

DATA ON THE MACHINE Machine type: Machine landing gear / Tank rolls Manufacturer: HTS Model: ECO-Skate I30L-I30S / 6t payload Built: 2020 Condition: new Location Warstein , Germany Reference MZ-HTS-ECOSKATE-I30L+S-DP Description We offer you a new transport suspension from the manufacturer HTS / made in Germany consisting of Train drawbar Type:I30L Roll count: 4 / Material PU Height: 110mm Payload: 3t Weight: 14kg And Paralell suspension type: 30S Roll number 4 / Material PU Height: 110mm Connecting rod: 120-880mm Payload: 3t Weight: 14 kg Further technical data on request. Not the chassis you're looking for? We are happy to offer you heavy-duty suspensions in various sizes up to 128t payload. Our offer is aimed at professionals who are covered in accordance with the Trade Code in accordance with Section 14 GewO. The offer is subject to chang ...

DATA ON THE MACHINE Machine type: Machine landing gear / Tank rolls Manufacturer: HTS Model: ECO-Skate I90L-I90S / 18t Payload Year of construction: new Condition: new Location Warstein , Germany Reference MZ-HTS-ECOSKATE-I90L+S-DP Description We offer you a new transport suspension from the manufacturer HTS / made in Germany consisting of Train drawbar Type:I90L Roll count: 12 / Material PU Height: 110mm Payload: 9t Weight: 57kg And Paralell suspension type: 90S Roll number 12 / Material PU Height: 110mm Connecting rod: 460-1145mm Payload: 9t Weight: 36 kg Further technical data on request. Not the chassis you're looking for? We are happy to offer you heavy-duty suspensions in various sizes up to 176t payload. Our offer is aimed at professionals who are covered in accordance with the Trade Code in accordance with Section 14 GewO. The offer i ...

Warehouse number: 3691 CNC ROTARY TABLE Manufacturer: Hydex, Type: AT-250 - 5 Axis Year of construction: 2022 Specifications: Table size 250 mm Center Height 320 Spindle hole 75H7 mm CNC control 2 ashes revolutions 50 per min Control Fanuc-Mitsubishi-Siemens-Heidenhain

Modular cleaning device for cleaning various tool pick-up cones - Stable housing with integrated timer switch to avoid continuous running of the device - Ergonomically designed for safe and easy working - Resistance to rust and cooling lubricants - Fast, gentle and reliable cleaning of heavily soiled or Resinous tool holders What's Included -Drive - Attachment for HSK-63 tool holders Subject to prior sale and technical errors

Article number: 27-04-155 Manufacturer: Kreuztisch Good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1980 L x W x H: approx. 800x500x500mm Weight: approx. 200kg Table clamping surface: approx. 500x200mm Travel: X-axis: approx. 350mm Y-axis: approx. 230mm Distance between T-slots: approx. 120mm Accessories  Mechanical clamps  Grid plate with locking bolts Other accessories on request

very well preserved, almost as good as new 20x lens, with condenser lens, suitable for types PV 500 and PV 5000.

Multifix steel holder head Manufacturer MIVESA - the original Size C Location hole for Multifix on the support, diameter 23 mm Weight: 11 kg Very good condition

9 drawers Weight: 293 kg Dimensions LxWxH: 720x725x1000mm Included content: Listing see photo

Large stock of punching material (dies/stamps), spare parts

length: 650 mmwidth: 720 mmheight: 1850 mmweight: 255 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine : Cutter Heads Make : Coromant, Walter,.. The cutter heads are used and partly as good as new. φ 400 , Coromant, T-Max , 26 teeth, No. 705420, cassettes 265.2-828, as good as new, none Signs of wear, € 300,- A- Ø 100 2 pcs. Sandvik, €150,- C- Ø 500 1 pc. WALTER OO F244 , as good as new € 200,- D- Ø 400 1 pc. WALTER RH F244 gebr. good € 200,- 1 pc. WALTER OP F244 € 200,- slide. 100mm Sandvik Price : VHB or against bid ! Maybe it can also be used as decoration. Entrance area outdoor area !

High-precision parallel documents, sanded in pairs, dimension + parallelism in height and width +/- 0.005mm. Dirkt from the manufacturer, made in Austria.

Original packed 2 set present

Digital display SINO, DRO, 3 axis display, or milling machines Price example: for lathe Z 1000mm, X-350mm Unused, other dimensions on request ! Assembly on request or self-assembly !

For sale comes: 1 used clamping/boring table Manufacturer: Skoda Type: E20OB22875 YEAR: 1989 Dimensions 2,000 x 2,000 mm Part weight: up to 25t electr. adjustable Mass: 10t

CNC controller: X-act SDS2 Axes X-axis travel mm: 200 Y-axis travel mm: 300 Z-axis travel mm: 300 C-axis degrees: 250 Worktable Maximum workpiece size (D x H) mm: 250x350x300 Max. workpiece weight kg: 100 Equipment MOS FET pulse generator 30 A max. Machining current Rated power kVA: 3.3 Basic machine dimensions / weight Length mm: 1600 Width mm: 1750 Height mm: 2015 Weight kg: 550

Extension cable 3 meters for Sony digital display 2 square, price each EUR 70,-- plus VAT

Transport and pressure unit for oval pipes 3000 mm long at 80-1100 mm diameter (without lifting and traversing unit) - The device has a hydraulic supply built into the head (visible also in the picture). - Electrical supply with attached control box direct connection to 380 V. - Hand-held buttons for the pressing functions. W8bik - The unit was constructed according to CAD drawing set with principle drawing. - Required lifting unit max. 1 to. Chain hoist.

Plan knife head, knife head in wooden box Manufacturer Tizit (today CERATIZIT - Group) Type Max Mill Plansee Diameter approx. 255mm 14 inserts Diameter tool holder 60mm Hole circle for recording approx. 100mm Number of holes 4 pieces Accessories: 33 inserts, torx key Milling Knife Head Comet Sandvik Coromant Klenk Insert Turning Tools EcoCut cutting tools Insert milling tools Tools with high-hard cutting materials Special price

Two drawer cabinets with roller drawers incl. accessories for CNC lathe Traub TNS30 are offered. Accessories e.g. Traub Adjusting Microscope Traub Adjustment Tool VDI30 Soft top jaws approx. 82 set (3 jaws each) approx. 5 driven tools (partially disassembled) approx. 80 tool holders Approx. 72 collets approx. 32 collets Lot of parting chisel Lot of turning chisels Post Milling Cutter Dial gauge Lot of centering drill bits Post of interchangeable tips for moving tips Lot of Inserts Lot of spare parts Traub Without the pictured 3-jaw chuck Cabinet Height 1m, Width 70cm Depth 70cm The photos do not show the complete scope of delivery. More photos on request or by visiting on site. Listing without guarantee! Sale price

Article number: 27-06-002 Manufacturer: Spänewagen Good general condition Fully functional Shipping time: All rights reserved. Year of construction: ca.1985 L x W x H: ca.1200x650x1000mm Weight: approx. 80kg Interior: Length: approx. 1100mm Width: approx. 620mm Height: approx. 500mm Accessories  Mobile on castors  Tilting mechanism for emptying the chips Other accessories on request Price and other technical data on request

Outer Ø: 310 mm Bore: 115 mm Chuck height with flange: 115 mm Height with clamping jaws 165 mm Clamping bolt spacing 120 mm Bolt D 27 mm- M16 new square safety spanner

Article number: 27-06-001 Manufacturer: Spänewagen Good general condition Fully functional Shipping time: All rights reserved. Year of construction: ca.1985 L x W x H: approx. 1200x600x1000m Weight: approx. 80kg Length: approx. 1100mm Width: approx. 600mm Height: approx. 500mm Accessories  Mobile on castors  Tilting mechanism for emptying the chips

Work table with T-slot table #4604 Overall size:1500x1200x800 mm Weight: 2820 kg

1 pallet tool holder SK50---(approx. 60 pcs.)

72 pcs. SK50 Mounts + Accessories

1 Pallet Holders SK50 (approx. 24 hours)

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Package Pressure Collets Type 138 E 5 pieces 3,0mm 2 pieces 4,3mm

Package pressure collets type 173 E 7 pieces 16,0mm UP version 1 piece 14,8mm 1 piece 21,0mm

Various machine stands for Bench drills Wood milling machines Shop presses and much more. Various models from German production, suitable for. Machine types

Work table with T-slot table #4603 Overall size:1500x1200x800 mm Weight: 2820 kg

EU pallet chassis, heavy-duty trolleys, transport scooters, dray Dimensions: width x length x height (approx. 82 x 122 x 46 cm) 4 heavy-duty roller wheels (2x swivel castors) Very stable steel frame with 4 protection angles) Portable with forklift It is sold as shown. All information without guarantee

4 STK. LANGE FRÄSDORNE FOR HORIZONTAL FRÄSEN SK 50 FOR 22 mm, 27 mm, 32 mm, 40 mm THE FRÄSDORNE ARE IN A VERY GOOD CONDITION