Takım tutucular

Swivel holder ARNO 10AB0022 1801016 with internal cooling Shaft 12x12 mm

tool taper: VDI 20 shaft cross cut: 20 mmtool taper: 20 ratio: 2:1 turning speeds: U/mincoolant: ja / yes Boley tool holder driven d106-02, gear transmission ratio 2:1, for following BOLEY machines:Boley BC 32, Boley BC 42, Boley BE 42good conditions, suitable for cross drilling & milling,radial4 off on stockThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

approx. 100 Capto C4 adapters, see photos

Package HKS63 Tool Mounts composed of 1 piece Holex HSK 63-M8x101 for screw-in milling cutter 1 piece Holex HSK 63-M12x101 for screw-in milling cutters 1 piece Holex HSK 63-M12-126 for screw-in milling cutters 1 piece HSK 63-M12-132 for screw-in milling cutter 2 pieces Garant HSK-A63-4-80 shrink chuck 1 piece Garant HSK-A63-8-50 for screw-in milling cutter 5 Garant HSK 63 M8-101 for screw-in milling cutters 1 piece Hoffmann HSK-A63-8-65 for Weldon 1 piece Hoffmann HSK-A63-16-80 for Weldon 1 piece Goblet HSK 63x6x65 for Weldon 1 piece Goblet HSK 63x10x65 for Weldon 1 piece Goblet HSK 63x12x80 for Weldon 4 pieces WNT 84 754 622 transverse groove cutter mandrel

Drill holder Ø16.0 mm SET: 5 pieces

3x SK40 Collet Holder ER40 1x SK 40 Collet holder ER 32

tool clamping area: 1 - 32 mmweight: 8 - 12 kgMachine dealer with own stock of 1600 m².The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

16 pieces tool holder external machining 41 tool holders internal machining

Swivel holder GRAF SET: 4 pieces Modèle: 01-1381 SCUC R 2559 C09 IK (2 pieces) Modèle: 01-1382 SCUC R 2559 C11 IK (1 Stück) Modèle: 01-1383 SER 2559 C16 IK (1 piece) For Miyano BNA DHY3

Swivel holder Miyano SET: 2 pieces Heimatec 8 251 01 000 New

amount: 9 STKweight: 5 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 49 STKweight: 10 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

7 pcs. Index VD30 mounts with Capto interface, 3 pcs. powered by it, mint condition!

Tool holder driven for index G300 (VDI30) Condition: Used Set consisting of: 10 pieces of straight tool holders (1 piece more as seen in the picture) 14 pcs angle tool holder

Tool holder fixed for Index G300 (VDI30) Condition: Used Set consisting of: 14 pieces of drill rod holder 24 pieces of turning steel brackets 2 pieces of detour

Tool holder collet fixed for index G300 (VDI30) Condition: Used Set consisting of: 14 pieces of drill rod holder 24 pieces of turning steel brackets 2 pieces of detour

ISCAR Swivel Holder SET: 13 pieces NEW PDACR-1616M-11S 2 pieces PDACL-1616M-11S 3 pieces PDACR-1212M-11S 2 pieces PVACR-1616M-11S 1 piece PCHR 16-24 1 piece DGTL 16B-3035 1 piece DGTL 16B-3025SH 1 piece SVVCN 1616K-11S 1 Stück SVVCN 1616K-11S 1 Stück

used, tested, good condition listed price / per holder Image: 8031 Absorbed SK 40 DIN 69871 with collet chuck ER 40 Manufacturer: DIEBOLD or KELCH Inside.- :Holder for ER 32 collets Outside.-: ø 65 mm nut for ER collets Length : 63 mm Supplied with tightening nut, with tightening bolt. Images 8032 Absorbed SK 40 DIN 69871 with collet chuck ER 32 Manufacturer: KELCH predominantly Interior holder for collets ER32 Outer diameter 60 mm Nut for ER collets Total length : 63 mm Delivery incl. 1 tightening bolt / tool. Image: 8031 Absorbed SK 40 DIN 69871 with collet chuck ER 40 Manufacturer: DIEBOLD or KELCH Inside.- :Holder for ER 32 collets Outside.-: ø 65 mm nut for ER collets Length : 63 mm Supplied with tightening nut, with tightening bolt. Images 8032 Absorbed SK 40 DIN 69871 with collet chuck ER 32 Manufacturer: KELCH predominantly Interior hold ...

SK40 DIN 69871 Oil Feeder met Holder Weldon 40mm A= 65mm For internal cooling for rails without internal cooling through the spindle

SK40 DIN 69871 Oil Feeder Weldon 32mm

1 box with various tool stops turning

WDL 4/40 080081 WDR 4/40 090035 WD 4/40 080039 WB 4/60 080062

Approx. 23 pcs. Preciflex Adapter - used

Rapid Original TRM 350 Quick Release Holder type TRM350 Indexing 0.005 With 7 alternating necks 4 Pcs 201/350 34mm 1 St 202/350 Prima 32mm 2 Pcs 216/350 Diameter 50mm

Manufacturer: RGX-Tools Type: RGX2-65/101-32/2 (DO) Condition: as good as new , was used for demover search Warranty: 12 months description: BMT 65 Radial tool holder, with internal cooling for DOOSAN; Hyundai Wia... Axial version ( straight holder ) Manufacturer: RGX- Tools SKU: RGX2-65/101-32/2(DO) Tool holder: collet chuck ER 32 Internal cooling: yes ; 20 bar Compatible with the following machines Chevalier ᐳ FBL-300 DOOSAN ᐳ PUMA 2100/2600 M/LM/MS/LMS DOOSAN ᐳ PUMA 2100/2600 Y/LY/SY/LSY DOOSAN ᐳ PUMA 3100 M/LM/LY/XLM/XLY/ULM/ULY DOOSAN ᐳ PUMA MX 2000/2500 DOOSAN ᐳ PUMA MX 2600 T/ST DOOSAN ᐳ PUMA TT 2000/2500 M/S/Y Focus CNC ᐳ FBL 300MC HAAS ᐳ DS-30Y HAAS ᐳ ST-20/25/30/35 Y HAAS ᐳ ST-20/25/30/35 Y Hyundai ᐳ SKT 200/250 TTSY Johnford ᐳ SL35/65 BMT65 Leadwell ᐳ LTC 25iM (BMT65) SMEC ᐳ PL 20/25/35 SMEC ᐳ SL 2000/2500/350 ...

Make : RGX-Tools Type: RGX2-65/201-32/2.3-72(DO) BMT 65 radial Condition: as good as new , was used for demover search Warranty: 6 months description: Radial tool holder, with internal cooling BMT 65 for DOOSAN; Hyundai Wia... Axial version ( straight holder ) Manufacturer: RGX- Tools SKU: RGX2-65/101-32/2(DO) Tool holder: collet chuck ER 32 Internal cooling: yes ; 20 bar Compatible with the following machines Chevalier ᐳ FBL-300 DOOSAN ᐳ PUMA 2100/2600 M/LM/MS/LMS DOOSAN ᐳ PUMA 2100/2600 Y/LY/SY/LSY DOOSAN ᐳ PUMA 3100 M/LM/LY/XLM/XLY/ULM/ULY DOOSAN ᐳ PUMA MX 2000/2500 DOOSAN ᐳ PUMA MX 2600 T/ST DOOSAN ᐳ PUMA TT 2000/2500 M/S/Y Focus CNC ᐳ FBL 300MC HAAS ᐳ DS-30Y HAAS ᐳ ST-20/25/30/35 Y HAAS ᐳ ST-20/25/30/35 Y Hyundai ᐳ SKT 200/250 TTSY Johnford ᐳ SL35/65 BMT65 Leadwell ᐳ LTC 25iM (BMT65) SMEC ᐳ PL 20/25/35 SMEC ᐳ SL 200 ...

Manufacturer : RGX-Tools Type: RGX2-65/101-32/2(DO) Condition : new Warranty : 12 months 14 pieces in stock for immediate delivery Description: BMT 65 radial tool holder, with internal cooling for DOOSAN; Hyundai Wia... Axial version ( straight holder ) Manufacturer: RGX- Tools Item number: RGX2-65/101-32/2(DO) Tool holder: Collet ER 32 Internal cooling : yes ; 20 bar Compatible with the following machines Chevalier ᐳ FBL-300 DOOSAN ᐳ PUMA 2100/2600M/LM/MS/LMS DOOSAN ᐳ PUMA 2100/2600 Y/LY/SY/LSY DOOSAN ᐳ PUMA 3100 M/LM/LY/XLM/XLY/ULM/ULY DOOSAN ᐳ PUMA MX 2000/2500 DOOSAN ᐳ PUMA MX 2600 T/ST DOOSAN ᐳ PUMA TT 2000/2500 M/S/Y Focus CNC ᐳ FBL 300MC HAAS ᐳ DS-30Y HAAS ᐳ ST-20/25/30/35 Y HAAS ᐳ ST-20/25/30/35 Y Hyundai ᐳ SKT 200/250 TTSY Johnford ᐳ SL35/65 BMT65 Leadwell ᐳ LTC 25iM (BMT65) SMEC ᐳ PL 20/25/35 SMEC ᐳ SL 2000/ ...

Driven tool holder for heavy cutting with 80 bar internal cooling and switchable between internal cooling / external cooling / or both together can be ordered by many manufacturers

VDI 40 for Okuma , angular driven tool holder ( radial ) , clutch Okuma stepped, without internal cooling Type: RGX1-40/251-25/1.2-80JA Warranty: 12 months TURRET TYPE VDI MACHINE MODEL ES L10 II M (DISC) MACHINE MANUFACTURER OKUMA TYPE OF TOOL HOLDER LIVE TOOLS PRODUCT TYPE ANGULAR SHANK SIZE 40 INTERNAL COOLING NO TOOL GRIP DIMENSION ER25 TOOL GRIP TYPE COLLET Transmission ratio 1:1 TORQUE [Nm] 50 Height [mm] 80 Suitable for the following machines Compatible machines OKUMA > ES L10 II M (DISC) > ALL TYPE > ALL TYPE OKUMA > ES L10 II M (DISC) > LIVE TOOLS > ANGULAR OKUMA > LB/LU 300 M (DISC) > ALL TYPE > ALL TYPE OKUMA > LB/LU 300 M (DISC) > LIVE TOOLS > ANGULAR OKUMA > LB/LU 25-M (DISC) > ALL TYPE > ALL TYPE OKUMA > LB/LU 25-M (DISC) > LIVE TOOLS > ANGULAR We sell exclusively to traders Prices are net plus the legal Vat

1x VDI 40 steel bracket holder C4 C4-RC2040-51030 L= ; B= ; WeightG:= 3kg 2.2)58760 Cylindrical C4 adapter diameter 50x90mm 9x Inner Extractor Bracket 10x External Swivel Holder 3x outer piercing holder visible as far as possible 1) C4_R166_4KF-12060 Female Thread Swivel Holder 2) C4-B_SNR-27042-12 3) C4-R166.4FGZ-27050-16 External Rotary Bracket Right Triangular Plate : 4) C4-SDJCR-27050-11 External Swivel Bracket Right Triangular Plate 5) C4-DSSNR-27042-12 External swivel holder right 1x with plate, clamped from above 6) C4-SVJBR-27050-16 External swivel bracket right 1x with insert, Torx screws 7) C4-SDUCR-13080-11 Coro Turn Drill Rod, Internal Rotary Square Plate-Torx Sxamuk 8) C4-PCLNR-17090-12 Internal torque with clamping 9) C4-SVQBR 13090-16 Internal Rotary Holder Copy Plate 10) 3pcs C4-RF15.1230-G20-27050B & 27060B Cut-off holder sword Shipping costs on re ...

amount: 1 STKThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 130 mmHead diameter: 64 mmexternal diameter: 58 mminternal diameter: 25 - 50,3 mmamount: 12 STKThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 34 mminternal diameter: 2 - 13 mmamount: 14 STKThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 110 mmexternal diameter: 34 mmHead diameter: 43 mminternal diameter: 6 - 28 mmamount: 23 STKThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 12 STKweight: 3 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 44 STKweight: 10 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Collet holder rear STAR 0R1-22 As good as new 2 pieces

Tungaloy Flat Puncture Holder CTIFL 10-8T05

tool clamping area: . mmweight: . tapprox. 53 piecesThe techn. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

different tool holders34 pcs  HSK63       --> 20.- EUR/ pice120 pcs HSK-A-100   --> 20.- EUR/ pice

Various SK50 tool holders are available for sale. Size: SK50 Standard: DIN 2080 Various different designs, such as: - Collet chuck - Weldon chucks - Combi clip-on milling mandrels -Knife head attachment -Intermediate sleeves for MK with exfoliating flap -NC - Drill chuck -etc. All tool holders are sold without tightening bolts

tool clamping area: 20 - 70 mmweight: 5 - 8 kgPrice is per piece, if you are interested please contact us.Machine dealer with own stock of 1600 m².The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: mit 30 SK50 Aufnahmen width: 1.200 mmheight: 2.000 mmweight: 300 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tool taper: VDI 40 DIN 69880 number: 22 StückA range of tool holders.Condition well preserved.Tool holder size: VDI 40, DIN 69880Was used on a Gildemeister CTX 500 E CNC lathe.Quantity:1 driven tool holders, angled design.18 driven tool holders, straight design.3 standard tool holders.Only sold in a package!The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.