Notes: The swivel function of the Rädlinger Tilt 90 by 2 × 90° makes it possible to work in confined spaces. At the same time, the Rädlinger Tilt 90 expands the range of applications and performance of excavators as well as the efficiency of the attachments. Technical information: - with hydraulic locking - Weight: 219 kg - Swivel angle: 180° - Torque: 4320 Nm at 210 bar - Holding torque: 14,200 Nm - Oil requirement: 5.2 ccm/1° - Max. operating pressure: 210 bar - Assembly recommendation: HS 03DW (up to 7 t), HS 08 - Dimensions solo motor (W x H x L): 270 x 230 x 402 mm - Weight solo motor: 90 kg - Swivel angle 2 x 90° - Overload protection by double pressure relief valve - Protection against pressure loss on the excavator side due to double Unlockable non-return valve - Maintenance-free and wear-resistant - Low installation height - Optimized size, match ...

floor-plate length: 5000 mmfloor-plate width: 1800 mmfloor-plate height: 290 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical information: - Carrier Yanmar VIO 33 - Quick coupler mount hydr. HS 03 Quick coupler

table length: 400 mmtable width: 400 mmtable load: 120 kgtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mUsed rotary table in very good condition, little used (less than 100 hours)Table diameter 400 mmBosch AC-MotorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cab for mini excavator approx. 83cm x 100cm with windscreen wiper and opening front Slight paint chipping

Can be taken away from our yard for Free., 0 �

various grippers/pliers in stock (see photos) each with adapter plates

2.0 t capacity, 80x40x1200 mm tines, with Bobcat T30.60 & T35.105 telescopic handler mount

Diameter x width: 750 x 1,500 mm max. operating pressure 300 bar Weight: approx. 2,800 kg 76 Chisel

Year of construction 2020, 80 cm width, 300 l capacity, 214 kg own weight, adapter for KSW08

System DELMAG ; Load capacity 0.5 t ; Tare weight 1.45 t ; Tray capacity 2 m³ ; Reach C= 2029 , D= 3220 mm

Year of construction 2022 - NEW; with Martin M10 mount, 420 kg net weight, suitable for 6 - 12 t excavators

Hydraulic hammer demolition hammer for excavators from 4to to 9to Manufacturer MUSTANG Model HM300 (Unused) Building YEAR 2021 Serial number AH21XXXX Operating hours 0 Accessories: Chisel Weight 275kg Working pressure 60-80 bar Flow hydraulic oil 40 - 100 liters / min

with Genie / Terex recording

ID3197 Wolf TSP 124 year/Year of construction 2020 1850 kg Bucket separator, excavator class: from 18 t, wheel loader class: from 10 t, cutting width: 1200 mm, volume: 1.5 cbm, screening area: 1.10 m², throughput/hour: 52-77 cbm/hour, working pressure: 280-300 bar, oil requirement: 150-200 l, max. pressure: 320 bar, with Lehnhoff MS21 quick coupler bucket separator, excavator class: from 18 t, wheel loader class: from 10 t, cutting width: 1200 mm, volume: 1.5 cbm, screening area: 1.10 sqm, throughput/hour: 52-77 cbm/h, working pressure: 280-300 bar, oil requirement: 150-200 l, pressure max.: 320 bar, with quick coupler Lehnhoff MS21

NEW, 2.15 m³ capacity, 585 kg net weight, with Euro mount, Also other recordings such as Atlas, Avant, Bobcat, Cat, Claas, Deutz Fahr, Dieci, Faucheux, Genie, Giant, Hercules/Everun, JCB, John Deere, Kramer, Liebherr, Mailleux, Manitou, Merlo, Mustang, New Holland, Paus, Schäffer, SMS, Terex, Volvo, Weidemann, Zettelmeyer available!

ID3129 MRS 5,5 cbm grapple 5.5 cbm MRS hydraulic grab 5.5 cbm MRS Hydraulic Grapple

NEW, 2.50 m wide, with Manitou holder, 2.15 m³ capacity, 585 kg dead weight

Hydraulic hammer / hydraulic-Meisel attachment used. For bobcat, mini excavator and small wheel loader with holder on fork carrier. Manufacturer/Type: unknown Holder approx. H-400 mm, W-1114 mm Meisel-A approx. 70 mm Meisel length approx. 400 mm Pressure: 400/850 PSI Total approx. 1160 x 1000 x 800 mm Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.

NEW, width 220 cm, 266 kg dead weight, 0.75 m³ capacity, with JCB Q fit mount

Attachment for an excavator Stone barrel, concrete cutter, surface milling machine, drum barrel, attachment cutter, cross-cutting head cutter used O&K Orenstein and Koppel SN1487569 940963 211.22.25.42 Cutter diameter s. 670 mm Width: approx. 1300 mm Tool holder approx. 30 mm Ambauschild approx. 700 x 570 mm Hole size approx. 580 x 420 mm Bore approx. 275 mm Total dimensions: 1400 x 1300 x 670 mm Subject to changes and errors in technical data, information and prices as well as intermediate sale

Ripper tooth - ripper tooth with various mounts suitable for Martin, Geel, Winkelbauer, Baumaschinentechnik, Lehnhoff, Verachtert, Miller, Oilquick and many more. for excavators from 1t to 35t Demolition tooth made of HARDOX400 with replaceable tooth, remaining parts made of S355I2+N steel listed price is for the 1-2t excavator version

Sell Bosch Demolition Hammer GSH 11 VC The machine is in good condition, functional and tested.

Bosch Demolition Hamer; Mortise hammer GSH 5 CE. 5 Units In Stock

1 set of welding hooks, with Volvo attachment

As pictured without cables. Shipping D-country without islands 9.-

Overall length 110 cm, diameter 13 cm, pointed chisel suitable for hammer HS1500 or HS1600, Year of construction: 1

Snow sign of the company Albert Uenningmann, suitable for cyclists Gehlmax KL 265. 2np70ra It is in very good condition as it was rarely in use. Dimensions: Shield: 150 cm x 60 cm Bracket: 80 cm x 45 cm (trapezoidal)

Description: Carrying capacity 5 tApprox. Onsite Dimension. (l x w x h): 2,050 x 200 x 300 mm, weight approx.: 105 kg