çevresel ekipman (örneğin ısıtma taşıma kurutma) kullanılmış satılık

Suction with electric motor,intake opening D=150mm, blow-out D=115mm, motor 0.6KW

table length: 1300 mmtable width: 800 mmstroke height: 1010 mmweight max. in kg: 2000 kg: 190 mmconnected load frequency: 400 Vtotal power requirement: 0,75 kWstroke speed - idle stroke upwards: 40 sek.stroke speed - idle stroke downwards: 30 sek.weight of the machine ca.: 0,28 tdimensions of the machine ca.: 1,3 x 0,8 x 0,23 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Code: 0265 Brand: ISVE Model: ESC JUNIOR/5 - CE Standard Vacuum dryer for wood with electric heating - CE Standard Capacity m/cubic 0,7 Electric heating Machine body in stainless steel N° 5 heating plates mm 480 x 5000 x 10 - 422W/each Wood pile size mm 5000 x 480 x 400 h Installed power: N° 1 oil vacuum pump with motor Kw 0,75 - Heating elements Kw 3,75 Door opening by means of N° 2 pneumatic cylinders Electric control panel Instruction manual Overall dimensions mm 5900 x 1000 x 1200 h Weight kg 1000

Power: 650 Watttank capacity: 5,5 llength: 515 mmwidth: 430 mmheight: 825 mmweight of the machine ca.: 36 KgProfessional 650 watt construction dryerRecommended room size 40 - 50 m², height max. 2.6 mSound pressure level approx. 52dBDehumidification capacity 28 L/D - 51 L/DThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Chip extraction unit model ASA 2 with 2 extraction filters and 2 filling bags Motor 2.2 KW Air flow 2300 cbm/h Year of construction 2011 with complete pipe distribution

table length: 1300 mmtable width: 800 mmstroke height: 1015 mmweight max. in kg: 3000 kg: 220 mmconnected load frequency: 400 Vtotal power requirement: 1,5 kWweight of the machine ca.: 0,32 tdimensions of the machine ca.: 1,3 x 0,8 x 0,23 mThe hydraulic lifting tables are electrically driven and operated.Have a contact strip for safe lowering operation.Wide applicability for workshops, assembly departments, loading pits, etc.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 7 m²

Room extraction dust with extension unit and Octopus 20 workbench Further data on request or see photos

height of stroke: 820 mm0: 1500 kgTable dimensions: 1300 x 800 mmstroke speed: 26 sec.0: 1,5 kwweight: 280 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Vacuum dryer model KVT 200, WW heated, length 6m, diameter 1400, little run with slide-in trolley, year of construction 1989

coolant capacity: 500 lFilter capacity: 800x900 mmdimensions of the machine ca.: 2x1,4x1,5 mtotal power requirement: kWweight of the machine ca.: 1 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1.Pipe belt conveyor RGFO 1200/900 x 37000 version with foldable upper half, clamping station manual, drive approx. 11 kW, with scraper, 2 level monitors, Hopper and transfer hopper built in 2011 2. Vibrating screen 3 levels / 3 sqm, motor 3 kW 3. Screw conveyor 3 x 500 mm, motors 3 x 7.5 kW

Load per column: . 0Load per cantilever: . 0Cantilever lenght: 600-1000 mmRack height: 1500 mmwidth: 4000 mmCantilever rack 4 levelsThe tech. Data are manufacturer or operator information and therefore for usnot binding. We reserve the right to prior sale, it applyonly our businessand conditions of sale.about usmore than 500 machines in stockover 8500 m² storage area, crane capacity 70 tmore than 10000 articles accessories for your workshopYou want to sell machines, production lines or your company,Then contact us.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Vibrating screen, motor approx. 5kW

table length: 1300 mmtable width: 800 mmstroke height: 190 / 1010 mmweight max. in kg: 2000 kgtotal power requirement: 0,75 kWweight of the machine ca.: 280 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Centrifugal chemical-resistant plastic Casing and impeller of fan are suitable chemical-resistant plastic and aggressive media in the process exhaust air. Manufacturer Hürner spark GmbH 35325 Mücke Atzenhain Type 16-RU 315 MN/0/1420 Factory No. 2-29191/00 Built in 1999 Air flow / volume 2166 / 1900 m³/h Power 1.50 KW, 1619/1420 RPM. Pressure difference PA 1287/990 Conrad Meiseberg home electric motor Type 90 L-4 DR No. 304987 3.4/6 A, 50 Hz, 1.5 KW, 230/400 V Star/Delta ISO F, IP55 1420 RPM., cos phi 0.82

Diameter: 250 mmTotal length: 2500 mm: Nadelfilz The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Portable fan / exhaust fans Stratos Ventilatoren GmbH Fan with ABB electric motor 0,75 KW, 400V, 50 Hz, 1,9A, 2850U/min Used

Capacity max Kg: 400 Total connection KW: 1.1

Drying container WISSMATEC Continuous dryer Drying system Year of construction 2024 Drying floor with slotted bridge sheets Hydraulic moving floor Outlet opening at the rear Filling and exhaust air opening at the top Drying capacity is dependent of material Material Material moisture

Sawn timber sorting and packaging line 2.90-5.20m Sequence description Dispensed Home & Dispensers Side goods are collected separately by means of conveyor belts into two stacks on top of each other. The storage tanks are emptied via the separation conveyor to the board feeder and board turner. At the Zuteil-u. The operator is located at the turning station, who is responsible for monitoring and assessing the quality of the boards. All boards are inspected from two sides and then electronically measured, this is done according to length, width, thickness and thickness. Quality in transverse transport. About the Wende-u. The cut goods are sent to the sorting conveyor, after which they are sorted into the 30 boxes At the end, stray sorting conveyors are transported away by conveyor belt. The belt boxes are emptied by lowering and disengaging the belts. Subsequently, the respectiv ...

Mobile dust extractor SCHUKO Type: Vacomat 200 XP Technical data: Connection Ø: 200 mm Filter cleaning: pneumatical (manual start) Volume flow: 2262 m³/h Motor power: 4,0 kW Filter surface area: 14,5 m² Test sign H3 / BGHM HO 123027 Dust level M, AWN 16 Noise absorbation: 73 dB(A)

VSA 48 EL Feed apparatus VSA 48 EL max. extension: 1050 mm 4 feed rollers Plastic cover of feed rollers Metal gearbox with hardened gears 8 speed levels Engine power: 0.75 kW 400 V Right and left run Weight: 70 kg G&STÜ-5115501

mobile extraction Brand: Schuko Type: Vacomat 350 XP Twin Year: 2022 - Schukos biggest mobile extractor for wood dust - efficient use of power, due to second motor that switches on/off on demand Technical data: Test mark H3 / DGU HO 213001 Max. volumetric flow: 10,000 m³/h Nominal volume flow: 6,910 m³/h, 2,550 Pa Connection diameter: 350 mm Filter area: 50 m², dust class M, AWN 16 Cone Motor power: 2 x 5.5 kW Filter regeneration: pneumatic-mechanical Sound pressure level: 69dB(A) built according to EN 16770 incl. control cabinet with 2 frequency converters incl. 2 forklift consoles Pressure surge cleaning (without electrical control)

ASA 3303 Raw air extraction system Rated power 3260 m3/h, Filter area 2 x 3.6 m2, Power 400 V 50 Hz 1.5 kW, 2 dust bags G&STÜ-5123303

Dust extractor brand: RIEDEX type: DM-350 P-B year: 2021 1 year warranty in single shift use (max. 1840 working hours) Technical data: - Version with chip drums, jet cleaning and with extinguishing device. - Filter area 49,6 m² - Max. volume flow 8.000 m³/h - Nominal volume flow 6,927 m³/h (negative pressure 2000 Pa) - Motor power 11 kW - Electrical connection 400V, 50 Hz, 3 phases, 32 A - Suction nozzle Ø 350mm - Residual dust content < 0.1 mg/m³, 72 dB(A) - Compressed air connection max. 7 bar - Weight 1320 kg

RLA 210 Clean air dedusters Metal fan wheel Inspection opening for cleaning the bypass filter manual cleaning Extraction of wood chips Not suitable for grinding dust mobile very quiet High extraction performance with small footprint Suction nozzle 200mm Nominal volume flow 2262 m³/h Volume flow max. 3700 m³/h Negative pressure at Vnenn: 2482 Pa Filter area 22m² Dust class M Residual suction content H3 Chip drum volume: 2x165l LxWXH 1755 x 830 x 1800mm Motor 3kW 400V 50Hz Weight 259kg G&STÜ-5132100

Mobile dust extractor Brand: SCHUKO Type: Vacomat 160 XPe New machine Technical data: Connection Ø: 160 mm Filter cleaning: motorised Volume flow: 1.593 m³/h Nominal volume flow: 1447 m³/h Motor power: 2,2 kW Negative pressure: 2.200 pa Filter surface area: 9,5 m² Test sign H3 / BGHM HO 123027 Dust level M, AWN 16 Noise absorbation: 69 dB(A)