kaynak makineleri kullanılmış satılık

Inv. Num. : 7530 Type: TruLaser 2030 Producer: Trumpf Created: 2018 Parameters: Duty cycle: 7313 h Hours: 4727 h Laser power: 2 kW Work table length: 3000 mm Work table width: 1500 mm Maximum table load (uniform): 900 kg Source: TruDisk 2001 Machine height: 2300 mm Machine length: 8276 mm Machine width: 6764 mm Machine weight: 7750 kg

number: 33 Positionenweight: 52 kgcondition: neu : 28 mmSet 1: 33 pieces, 28mm system, consisting of:Clamps: 4 x 280610.NClamps: 2 x 280630.NPrism: 2 x 280648.1.NBolt: 12 x 160511Stop: 4 x 280410.NStop: 4 x 280420.NAngle: 2 x 160110.NAngle: 2 x 280152.NAccessory set. 1 x 283999Price plus packaging and transport.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 1748 Type: KR5si5xx R850 Producer: KUKA Created: 2008

Capacity: 5 Kginternal dimension: 100 x 75 x 450 mmoutput: 0,4 kwconnected load frequency: 220 - 240 Vsetting device: 30 - 180 Gradweight: 10 kgdimensions: 570 x 200 x 150 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 4060 Type: ARC Mate 120iB Producer: FANUC Created: 2007 Parameters: Control System: R30iA Hours: 985 h Axles: 6 Payload: 20 kg H-reach: 1667 mm Repeatability: ± 0.0800 mm Source: Kempi – KEMPARC SYN300 Mains voltage: +-10%: 3x400 Power: 320 A Weight: 220 kg Accessories: Robot with 2 separate workstations: Danubius positioner and clamping table Dust extraction: POC 20 Table Metal Fence

table diameter: 1400 mmtable load: 3,0 tswivelling range: 0 - 135 Gradturning speeds: 0,05 - 0,5 U/minmax. torque on the faceplate: 6000 Nmtable pass: 200 mmwelding current: 700 Amperetotal power requirement: 1,1 + 2,2 kWweight of the machine ca.: tELDING TABLE WITH LARGE THROUGH BORE• Self-locking gearbox, no pre- or after-run with eccentric load.• Electronic components from Siemens and Schneider.• Frequency-controlled, very accurate speed control.• Turntable with large through hole and T-slots.• High stability through a clever construction.• CE certificate.• Very good price / quality ratio.• The D-TLP series comes with remote control and foot pedal (left / right).No original pictures. Design but identical.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 5559 Type: ARC Mate 100iB Producer: Fanuc Created: 2007 Parameters: Control system: FANUC SYSTEM R-30iA Duty cycle: 2000 h Maximum arm reach: 1373 mm Number of axles: 6 pieces Maximum load capacity: 6 kg Source: MIGATRONIC FLEX 4000 Nominal current: 7 A Accuracy: 0.08 mm Machine weight: 135 kg External Wire Feeder Cleaning station Base Control panel and control panel Simple table design

table length: 1200 mmtable width: 800 mmtable height: 850 mmVertikal stroke: 40 mmweight of the machine ca.: 0,18 tdimensions: 1,2 x 0,8 x 0,85 mSpecial offer ! Siegmund Workstation incl. 2 drawers + tool set BThrough hardened tool steel, bore Ø 16 mmHoles surface 50x50 mm grid, material thickness approx. 11.5 - 13 mm.Consisting of:1x 004002 (Siegmund Workstation)1x 164004.X07 (perforated plate)1x 164030 (clamp holder)1x 004020 (shelf)1x 164035 (bolt and prism holder)1x 004025 (tool wall including shelf)2x 004210 (drawer)4x 160620 (clamp)8x 160511 (double quick release bolts without groove)6x 160412 (stop)2x 160108.N (angle)1x 160852 (Allen key)1x 164301 (vice)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 6619 Type: SONIX 0510i – H Producer: YUDO-STAR Created: 2012 Parameters: Axis X: 2500 mm Axis Y: 660 mm Z axis: 1000 mm Number of axles: 3 pieces Load capacity in the 3rd axis: 8 kg Equipment: 2x Vacuum Touch screen

clamping range of chuck: 120 - 380 mmheight: 95 mmdaylight: 170 mmexternal diameter: Futter 400 mmexternal diameter: Spannhebel 600 mmweight: 26 kgCharacteristics:• Self-centering.• Reversible jaws.• Fixed clamping levers allow fast workpiece changes.• Low weight and flat design minimize the center of gravity.The D-D quick chuck enables a quick product change and is suitableexcellent with frequent component changes. You do not need a loose oneQuick release wrench, as the levers are integrated into the quick release chuck.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 6133 Type: PW 75/5 Producer: PROFIWELD Created: 2015 Parameters: Connection voltage: 480 V Power: 75 kVA Pressure: 0.6 MPa Cooling water flow: 12 l/min Frequency: 50/60 Hz

table diameter: 1000 mmtable load: 1200 Kgswivelling range: 0 - 135 Gradturning speeds: 0,1 - 1,0 U/minheight adjustment: 1000 - 1450 mmmax. torque on the faceplate: 2000 Nmengine output: 0,75 / 0,55 kWwelding current: 500 Ampere- Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate.The D-HBE series comes as a standard version with a cable remote control and a footswitch.Welding power transmission for max.500Ampere.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 6854 Type: HTL 2500 Producer: EG Created: 2014 Parameters: Load capacity: 2500 kg Equipment: Connecting frame (column spacing 4200 mm)

table diameter: 1400 mmtable load: 5 tswivelling range: 0 - 135 Gradturning speeds: 0,05- 0,5 U/mintable height adjustment: von 1100 bis 1950 mmmax. torque on the faceplate: 7000 Nmwelding current: 700 Ampereincluding remote control and welding current transmission.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 6855 Type: MA 1900 Producer: Motoman Created: 2012 Parameters: Operating hours: 2200 h The workstation consists of the following parts: Motoman MA 1900 Robot (DX 100 Controller) Source: Lorch Saprom Speed Pulse S8 Tbi Welding Torch GUDEL track - type TMF-1/4000 - with a carriage for a barrel with welding wire 2x fixed table with dimensions 2000x1500 mm and a load capacity of 650 kg Horizontal positioner WESTAX WXH-150 (load capacity 1500 kg) 3x internal automatic workstation doors 3x external telescopic doors 3x SICK safety scanners Automatic cooker hood 2x manually hinged hood Superior control system WESTAX RCU 50 TBI JetStream Automatic Welding Torch Cleaner Positioning frame in HOBES for the storage of fixtures Fencing of the robot workstation

Capacity: 10 Kginternal dimension: 135 x 80 x 480 mmoutput: 0,5 kwconnected load frequency: 220 - 240 Vsetting device: 30 - 180 Gradweight: 15 kgdimensions: 600 x 250 x 200 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 7291 Type: Romat 410 Producer: Cloos Created: 2007 Parameters: Control system: Rotrol II Welding machine: MC3R 553 Workstation with one track: 10 m

table diameter: 560 mmtable load: 0,3 tswivelling range: 0 - 90 Gradturning speeds: 0,25 - 4,0 U/min: 360 Nmwelding current: 500 Amperetotal power requirement: 0,4 / Hand kW• Self-locking gear, therefore no forward and backward at eccentric Load.• Electronic components from Schneider, Siemens and Delta.• Frequency-controlled stepless speed of the turntable.• High stability due to the robust construction.• welding power transmission• CE certificate.• Very good price / quality ratio.• The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 7236 Type: AX 21 Producer: OTC Daihen Created: 2011 Parameters: Maximum load capacity: 6 kg Total power requirement: 2600 W Machine weight: 160 kg

Protection level: 9 - 13 MPower supply: 3 Voltweight: 2 kgdimensions: 300 x 240 x 240 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 7355 Type: Tetrix 352 AC/DC Producer: EMW Generated:- Parameters: Switch-on hours: 33 h Operating hours: 10 h Machine weight: 177 kg Height: 1250 mm Width: 375 mm Length: 780 mm

weight max.: 60 tworkpiece diameter: 750 - 5000 mmdrum diameter: 480 x 180 mmfeed: 100 - 1000 mm/mintotal power requirement: 2 x 2,2 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 7264 Type: MA2010 Producer: Yaskawa Created: 2019 Parameters: Maximum arm reach: 2010 mm Maximum load capacity: 10 kg Control voltage: 3 x 400V AC 50 Hz Network Type: TNC-S Components: Controller DX200 Master Welding source Lorch S8 RoboMig XT Burner cleaner BRG2000D 2x Positioner DK-2500-R1000 Servo Rails FB500

table length: 1200 mmtable width: 1200 mmtable height: 850 mmVertikal stroke: 40 mmweight of the machine ca.: 0,261 tdimensions: 1,2 x 1,2 x 0,85 mWelding table SIEGMUND Professional 750 + plasma nitridedis made of high quality steel S355J2 + N and is plasma nitrided.Surface hardness max. 750 Vickers.The table has a material thickness of approx. 11.5 - 13.0mm.The holes have a diameter of 16mm.Hole arrangement in 50 mm grid on the table top,parallel hole arrangement in a 25 mm grid on the sides.Including basic equipment. Table height 850mmAccessories shown are optional.Price plus packaging and transport.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 7188 Type: MA 1900 Producer: Motoman Created: 2011 Parameters: Maximum load capacity: 3 kg Robot travel: 1200 mm Welding process: MIG/MAG Equipment: Two WG-1500 positioners Lorch Welding Accessories JetStream Burner Cleaner SICK Safety Scanner Automatic internal screen Optical Safety Barrier Telescopic entrance door Mobile top hood

table length: 2000 mmtable width: 1000 mmtable height: 850 mmVertikal stroke: 50 mmweight of the machine ca.: 0,73 tdimensions: 2,0 x 1,0 x 0,9 mWelding table SIGMUND Professional 750 + Plasma-nitridedis made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers.The table has a material thickness of approx. 24.5-27mm.The holes have a diameter of 28mm.Hole arrangement in 100 mm grid on the table topparallel hole arrangement in 50 mm grid on the sides.Incl. Foot basic equipment. Pictured accessories optional.Price indication plus packaging and transport.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 7048 Type:- Producer: CLOOS Created: GO 2019 Parameters: Maximum load capacity: 500 kg Clamping length between flanges: 1500 mm

table diameter: 450 mmtable load: 300 Kgswivelling range: 90 Gradturning speeds: 0,2 - 2 stufenlos U/mintable load capacity: 300 kg vertikaltotal power requirement: 220 kWweight of the machine ca.: 0,078 tdimensions of the machine ca.: 0,66 x 0,45 x 0,48 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 4741 Type: IR-SA 840 M Producer: Tiesse Created: 2006 Parameters: Table dimensions: 2410x930 mm Height: 3300 mm Width: 7000 mm Length: 5600 mm Equipment: Robot KAWASAKI FA 06 E C14 VK Robot Support MIG welding machines: Fronius Transpuls Sinergic 5000 Inverter TIG welding machines: Fronius Trans TIG 3000 DC Welding torch: ROBO 455 S S. Fronius FK4000 cooling unit Burner support: Binzel MOD CAT CPL-M Space for Fronius VR 1500 Euro 4R wire feeder Burner cleaning station Binzel MOD BRS-LC

table length: 1200 mmtable width: 800 mmtable height: 900 mmtable load: 2000 Kgweight of the machine ca.: 0,24 tdimensions: 1,0 x 1,0 x 0,9 mWelding table / hole table:Hole diameter: 28.3mmThe table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N(St 52/3)Plasma nitriding provides a hard surface layer.height adjustable from approx. 880 - 980mmBottom ribbed for reinforcement.including ground storageAccessories optional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.