Üretici:
(kategori: 107)
Combined sheet metal processing machine with:>br> bending, tool widths 25 - 50 - 75 - 150 - 200 - 250 - 300 mm.>br> rolls, roll diameter 42mm>br>- shears, max. 1015 x 1mm>br>>br>material width 1015 mm>br>material thickness 1 mm>br>speed by hand >br>weight 0.25 t>br>Dimensions L x W x H 1.4 x 0.6 x 0.75 m>br> >br>Condition: never used / new (5) Auction-ID: A7-44817-65
Hydraulic press for crimping hydraulic hoses, equipped with all the necessary dies for 0 hoses. 5 to 50 mm, never used 0 hours, packed in wooden crate Overall dimensions: 1000 x 800 x 1000 mm Weight: 270 kg Auction-ID: A7-44802-60
Hydraulic press for climping hydraulic pipes, equipped with all the necessary dies for 0 pipes. 5 to 50 mm, never used 0 hours, packed in wooden crate Overall dimensions: 1000 x 1000 x 1400 mm Weight: 310 kg Auction-ID: A7-44803-26
Hydraulic guillotine shears with>br>- ELGO control for backgauge>br>- Cutting angle adjustment>br>- Cutting length adjustment>br>- Cutting length limitation (time-dependent)>br>- Sheet thickness adjustment>br>- Backgauge with free-moving function>br>- Cutting line lighting>br>- Side >stopbr br>- 3 pcs. support brackets>br>- good condition>br>sheet width 3050 mm>br>sheet thickness 16 mm>br>stand width 3050 mm>br>stop depth 15-1000 mm>br>cutting angle adjustment yes °>br>Cutting gap adjustment yes mm>br>Connected load 30 kW>br>Machine weight approx. 14..5 t>br> Space requirement approx. 4.0 x 260 x 2.55 m Auction-ID: A7-44817-25
Pressure 20 t>br>stroke 200 mm>br>table size 550 x 550 mm>br>Working speed: 10 mm/ sec.>br>Working height 940 mm>br>Tool height max. 200 mm>br>Total power requirement 2.2 kW>br>Bending power 200 x 10 mm>br>Weight 650 kg>br>Dimensions 1.1 x 0.6 x 1.22 m >br>Condition: never used / new (5) Auction-ID: A7-44817-16
Hydraulic press for climping hydraulic pipes, equipped with all the necessary dies for 0 pipes. 5 to 50 mm, never used 0 hours, packed in wooden crate Overall dimensions: 1000 x 1000 x 1400 mm Weight: 310 kg Auction-ID: A7-44802-26
: neu : 2025 : 090130 : prompt, Zwischenverkauf v : Türkei : 3400 €: 1 : 30 mm: 148 mm: 118 mm: 2 : 0,75 kW: 2 m/min: 50x10 mm / 800 mm, 20x6 m : 80x15 mm / 700 mm, 30 x 6 : 30x30 mm / 900 mm, 10x10 : Ø 30 mm / 900 mm, Ø 10 mm : Ø 60x1,5 mm / 1.000 mm, Ø : 50x30x3 mm / 1.200 mm, 40 : 40x40x3 mm / 1.200 mm, 30 : 40x40x5 mm / 600 mm, 30x3 : 35x35x5 mm / 600 mm, 30x3 : 600 mm: 800 mm: 1450 mm: 220 kg2 mech. driven rollsstrong cast steel constructionshafts made of special steel,hardened and groundtop roll manual adjustablehardened universal rollslateral rolls adjustable in 1 axishorizontal and vertical operationdouble foot pedal forfor- and backward drivemachine and equipment accordingto the CE regulationsuser manual in GERMAN or ENGLISHWE HAVE MORE THAN 210 REFERENCES!The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: gebraucht : 2012 : 9690F : prompt, Zwischenverkauf v : Çin : 690 €: 1 : 100 mm: 3 mm: 90 : 90 kgBeidseitig verstellbare AnschlägeFingerschutzAusrüstung gemäß CE VorschriftenBu reklamın verileri, LogoTech oHG'nin yazılım çözümü ModulMWS ile oluşturulmuştur.
basınç: 100 boğaz: 620 mm darbe: 0-100 mm delik çapı levha kalınlığında: 40 inç 20 mmno. stroklar: 49 Hub/minControl: toplam güç gereksinimi: 15 kW makinenin ağırlığı ca.: 3.500 kgBu reklamın verisi, LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.
: ca. 12 - 14 Wochen ab Auf : Türkei : 20000 €: 5 mm: 1200 mm: 4,1 m/min: 3000 mm: 750 mm: 1400 mm: 1350 kg: 250 / 2000 mm: 300 mmMobile control panelHydraulic clamp on centerGearbox motor with brakeMotorized sheet centering systemInside cutting systemAccording to EC safety regulationsOperating manualOptional equipment: 1 spare blade set € 1.200,00 Flanging attachment with 1 set rolls € 2.000,00The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
levha genişliği: 2500 mm plaka kalınlığı: 3,0 mm sütunlar arasındaki mesafe: 2550 mm doğru kesme açısı ayarlanabilir: - arka durdurucu - ayarlanabilir: max. 510 mm kesme boşluğu ayarı: - mm toplam güç gereksinimi: makinenin kW ağırlığı ca.: 1,8 tboyutlar: 3,3 x 1,4 x 1,8 mBu reklam için veri, LogoTech oHG'nin yazılım çözümü ModulMWS ile oluşturulmuştur.
sheet width: 1000 mmplate thickness: 3,0 mmdistance between columns: 1050 mmdiameter of upper rolls: 90 mmtotal power requirement: 1,1 KWweight of the machine ca.: 0,47 tdimensions of the machine ca.: 1,7 x 0,8 x 1,35 mmSheet metal bending machine with custom dimensions:- Capacity 1050 x 3.0 mm- Digital display- Hardened rollers- Conical bending- Swiveling top roller- Brake motor- Safety device: Emergency stop cord- Documentation in English- 400VThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
levha genişliği: 2540 mm plaka kalınlığı: sütunlar arasındaki mesafe 2,5 mm: 2540 mm gündüz açılışı: 200 mm toplam güç gereksinimi: makinenin 2,0 kW ağırlığı ca.: 1,7 makine ölçüsünün ölçüsü: 3,35 x 0,8 x 1,4 mMekanik arka ölçer - bükme açısı ön seçimi - ayak anahtarı olan döner bükme makinesi Bu reklamın verileri LogoTech oHG'nin yazılım çözümü ModulMWS ile oluşturulmuştur.
Levha genişliği: 3000 mm plaka kalınlığı: 2,0 mm sütunlar arasındaki mesafe: 3140 mm gün ışığı açılışı: 80 mm toplam güç gereksinimi: makinenin kW ağırlığı ca.: 1,45 tboyut çapı: 3,8 x 1,5 x 1,6 mPnömatik segment bükme makinesi- Manuel arka ölçer maksimum. 830 mm- Limit anahtarlarla bükme açısı ön seçimiBu reklamın verileri, LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.
: neu : ca. 12 Wochen ab Auftrags : Türkei : 10800 €: 207.36 €: 35 mm: 137 mm: 137 mm: 3 : 1.1 kW: 7 m/min: 35x8 mm / 300 mm : 50x12 mm / 400 mm : 18x18 mm / 250 mm : Ø 22 mm / 200 mm : Ø 40x1,5 mm / 500 mm : 30x15x2,5 mm / 500 mm : 25x25x2 mm / 450 mm : 35x35x5 mm / 400 mm : 30x30x4 mm / 550 mm : 1050 mm: 500 mm: 1250 mm: 350 kg3 mech. driven rolls (brake motor)hardened and ground shaftslower rolls hydraulic adjustablehorizontal and vertical operationstandard set of rollsfoot pedal forfor- and backward drive2 digital readoutscontrol panelmachine and equipment accordingto the CE regulationsuser manual in GERMAN and ENGLISHWE HAVE MORE THAN 210 REFERENCES!The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: WA0136 : 3150 €: 1 : 8 mm: 3 x 1.000 ve 1 x 1.050 mm tam 30Bu reklamın verisi, LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.
: neu : 2025 : 090086 : prompt, Zwischenverkauf v : Türkei : 7400 €: 142.82 €: 1 : 197 mm: 4 mm: 2 mm: 20 1/min: 90 °: 4 kW: 890 mm: 780 mm: 1115 mm: 550 kgHydraulic driveAutomatic adjustment of the blade gap2 downholder2 gauges angle adjustableProtection cover, acrylic glassFoot pedalWaste boxAccording to ",CE", regulations User manual in English or GermanThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 83800 €: 1583.82 €: 2550 mm: 15 mm: 15 mm: 13 mm: 12 mm: 12 mm: 10 mm: 270 mm: 270 mm: 230 mm: 50 mm: 1155 mm: 15 kW: 4760 mm: 1660 mm: 1155 mm: 8950 kg4 rollsfully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear boxhydr. side rolls positioning with electronical synchronisationhydr. lower roll feed with mechanical synchronisationadjustable pinching pressurevariable rolling speedhardened rollsconical bending devicehydraulic drop-end bearingmoveable control paneloverload protectionuser manual in GERMAN or ENGLISHaccording to CE rulesOPTIONAL:NC controlupper and lateral supportsIMPORTANT ISSUES AT CONICAL BENDING:the max. sheet metal thickness isequivalent to 50 % of nominal capacitythe cone length can be max. 30 % oremust be more than 60 % of roll lengthhardened rolls are recommendedThe ...
: neu : ca. 12 Wochen ab Auftrags : Italien : 153200 €: 2895.48 €: 1350 mm: 0,4 - 120 mm: 1370 x 2200 mm: 6000 m³/h: 150 mm: 6 bar: 4200 mm: 2300 mm: 2350 mm: 4200 kgWITH 2 WORKING STATIONS: 1 X GRINDING BELT UND 1 X BRUSH UNIT ON TOP Machine made of stress-free welded steel construction for stable and rigid structure Work table with motorised height adjustment via 4 synchronised spindles. Independent drive motors for each work group. Hoods for extraction inside the machine, one per station.Touch screen for: Automatic star-delta connection of the main motors Digital display for sheet thickness with decimal point tolerance Material thickness adjustment (+/- 0.1 mm) Machine condition monitoring with alarm messagesFEEDING SYSTEM Robust steel structure, wear-resistant surface. Vacuum conveyor belt on request The table raises and lowers from 780 mm to a maximum height of 950 m ...
Largest blow: 40kp/mm2Working width: approx. 2040 mm Maximum. Sheet thickness: approx. 4.5 mm (for steel)Top roller diameter: approx. 160 mmmounted on plateDrive: motorised three-roller drive. Auction-ID: A1-44739-10
: 40 mm: 8,5 U/min: 120 mmroll diameter: 152 / 162 mmengine output: 1,1 kWconnected load: 400 Vweight: 395 kgOverall size: 900x600x1100 mmEquipment / Accessories:- Two driven rollers- Manual delivery of the upper roller- Working position horizontal and vertical- Bearings with tapered roller bearings- Use of replaceable slide rails on the guide carriage- The standard roller set is included. He can turndifferent profiles are usedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
• Manufacturer: Peddinghaus • Model: Peddimax 601 • Year of construction: 1993 • Machine type: Hydraulic punching and shearing machine (Ironworker) • Condition: Used, functional, signs of wear and tear • Punching force: approx. 60 t • Punching speed: approx. 16 strokes/min • Motor power: 5.5 kW • Operating pressure: approx. 250 bar • Electrical connection: 400 V / 3-phase • Capacities: • Flat steel up to approx. 400 x 16 mm • Angle steel machining possible • Hole punching up to approx. Ø30 mm (depending on material) • Notching and profile editing integrated • Equipment: • Extensive tool package (punches & dies in various sizes) • Foot control • Robust industrial design • Machine weight: approx. 1,780 kg • Dimensions (L x W x H): approx. 1540 x 900 x 1900 mm • Areas of application: • Metal construction • Steel constru ...
: neu : ca. 12 - 14 Wochen ab Auf : Deutschland : 4010 mm: 1.5 mm: 2 mm: 1.5 - 2 mm: 3 : 3 : 1000 mmFully automatic bending in two ways without the need to rotate the sheetHydraulic driveBMS MULTI-Touch with automatic depth stopPowered rotary shearAdditional rail on the bending beamMaterial support2x foot pedalSafety equipment accoring to the control rules BG Germany3 year warranty on stands and tension arms.Quality Made in Germany.FURTHER MODELS FROM3 UP TO12 M LENGTH AND FROM 1,25 MM UP TO 2,00 MM BENDING CAPACITY ON REQUEST.OPTIONS: Preserving material support made out of synthetics price on request Hydraulic radius adjustment (air gap adjustment)the bending capacitiy of aluminium rises up to 2,5mm price on request Extended depth 20 - 1.250 mm price on request Conical depth stop to bend conical profiles andnarrow/wide bendings for easy intermateing price on request Fully automatic gr ...
: gebraucht : 2004 : 9726 : prompt, Zwischenverkauf v : Türkei : 6750 €: 1 : 1350 mm: 3 mm: 35 1/min: 1.5 °: 550 mm: 3 kW: 2 Stk.: 850 mm: 400 mm: 1700 mm: 1350 mm: 1200 mm: 950 kgmanualback gaugeautomatic sheet hold downhold down with rubber padsmoveable foot switchside support arm2 supporting armsuser manual in GERMANdoes not complie with the German UVV and Austrian AMVOThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 2050 mmplate thickness: 3.0 mmdistance between columns: 2100 mmback stop - adjustable: 550 mmno. of strokes: 35 Hub/mincutting angle: 2°12 table width: 400 mmtable height: 850 mmControl: konv. total power requirement: 3.0 kWweight of the machine ca.: 1280 kgdimensions of the machine ca.: 2400 x 1500 x 1300 mm Current new price approx. 20.000 Euro from a maintenance workshopEquipment:- robust / powerful electro-mechanical guillotine shears- manual material backgauge stepless adjustment range adjustment from behind - by handwheel including mm scale max. adjustment range 550 mm- Manual kerf adjustment, from the front- 1x side stop with mm-scale- 1x support arms- 1x free-moving foot switch- rear sheet metal chute- rear safety device (light barrier)- Operating instructions (machine control)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
New V16, 5x 515mm, 1x 550mm divided, wila shot Auction-ID: A1-43823-234
New V24, 5x 515mm, 1x 550mm divided, wila mount Auction-ID: A1-43823-235
Y1, Y2, X, R, Crowning, Hydraulic under tool clamping, Many under and above tools Auction-ID: A1-43823-11
New top tool, 5x 515mm, 1x 550mm split, wila mount Auction-ID: A1-43823-236
690 € 
