Bükme makineleri

pressure: 32 tstroke: 250 mmtable-size: 500 x 760 mmwork height max.: 925 mmbending speed: max. 25 mm/sectank capacity: 80 lPressure power: 320 bartotal power requirement: 5,5 kWweight of the machine ca.: 0,8 tdimensions of the machine ca.: 1,3 x 0,5 x 1,3 mmax.bending height: 200 mmCutting capacity max. (St): 150 x 14Punching capacity max. (St) Ø 35Guide height: 200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- Capacity 20 tons - Bending capacity 200 x 12 mm - Stroke 200mm - NC touchscreen control Cg7z0oyokv - Foot control - Emergency stop - 400V

BEMA control pipe bending machine mod. G35 CND Specifications Tube Bender Capacity in round: max Ø 42 mm Tube thickness max 2,5 mm Bending angle: from 5° to 190° max Length of the mandrel: 2100 mm Max bending radius: 260° Min bending radius: 22° With: Delivered with programming manual Voltage: 220 V

For sale we offer a Bystronix Xpert 40/1030 press brake, year of construction 2016, serial number: 16500019, cutting length 1030mm, max. pressure 400kN, stroke 200mm, machine weight 4t. Working hours: 32494 and grows (machine still in operation) The machine is still connected. The visit is possible by prior arrangement. Please contact us. If you have any further questions, please do not hesitate to contact me.

Working width: 2000 mm bending capacity: 72.0 mm Bend: 66.0 mm Number of driven rollers: 3 Diameter top roll: 500 mm Diameter lateral underrollers: 420 mm conical bending device by inclination of the two side rollers hydraulic folding bearings Motor power: 56 kW mobile control panel with digital display Net weight: approx. 28 tons

sheet width: 2000 mmplate thickness: 72,00 mmpre-bending: total power requirement: kWweight of the machine ca.: 27 tdimensions of the machine ca.: mBend (cold) 66 mmDrive power 56 kWThe rollers are adjusted hydraulicallyTop roller diameter 500 mmSide roller diameter 420 mmWorking speed 5 m/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 20 tstroke: 185 mmtable-size: 480 x 1060 mmwork speed: 10,0 mm/secreturn speed: 10,0 mm/secweight of the machine ca.: 0,53 ttotal power requirement: 2,2 kWdimensions of the machine ca.: 1150 x 500 x 1200 mm- hydraulic horizontal bending machine- Solid work surface made of stabilized steel- Machine made of hardened and ground forged steel- Digital display for stroke adjustment- 1x tool kit- stepless adjustment of speed / pressing force- Double foot switchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 40 tstroke: 285 mmtable-size: 660 x 1250 mmwork speed: 10,0 mm/secreturn speed: 10,0 mm/secweight of the machine ca.: 1,5 ttotal power requirement: 4,0 kWdimensions of the machine ca.: 1,45 x 0,65 x 1,8 mEquipment: - hydraulic horizontal bending machine - solid work surfacestabilized steel - machine made of hardened and ground forged steel - Digital display for stroke adjustment - 1x tool kit - double foot switch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2040 mmplate thickness: 1,25 mmpre-bending: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mRight and left rotation via foot switch3-roller driveSafety cable switchConical rounding possibleThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Motorized three-roll bending machine Fasti 2040x2mm Roller diameter approx. 105mm sheet thickness over the entire length 2mm Foot switch GS identifier Hndxqcbkg Dimensions: LxWxH approx. 3x1x1.2 meters Weight approx. 1300Kg

Bending machine FAVRIN 3100×30 PHLS CNC (A3708) Type: hydraulic Max worklength: 3100 mm Eletric motor (power) 75 HP Courant needed 380V Weight 32 ton Machine was previously used to bend Hardox workpieces. bending capacities examples: – 3100 x 25 mm > multi stage bending for large radiuses – 2500 x 30 mm > multi stage bending for large radiuses – 3100 x 17 mm > single stage bending – 2500 x 25 mm > single stage bending full CNC corner + backgauge control upper hydraulic clamping of tools clamping force: 220 ton max bending angle: 110° max open: 500 mm Tooling included for radius bending Also 2 new extra cilinders included

Hydraulic press brake, used Hydraulical press brake, used type / model: D 160-25 Make / make: GWF Year / year of make: 1993 Pressure / force: 160 t Bending length / working length: 3,050 mm Stand width approx. / distance b/n standards: 2.550 mm Table width: 220 mm Stand RADIUS / depth of Cap: 280 mm height / shut height: 440 mm working stroke ca / stroke. Max 250 mm Hubgeschw. / speed of stroke: down: down; 90 mm / s Press down 11 mm / s Expensed. / upward: 90 mm / s Machine weight / weight: approx. 13 t Power consumption / connected load: 22 kW Spec/specif.: 2-hand/foot control / 2 foot switch - manual

Technical data: 4 bending rolls Max bending range: 3,000 mm external switching and Control Panel, as well as counter holder

Manufacturer: Haeusler Type: VRM HY 4000 x 45 Stock number: 0973 Year of construction: 2001 Bending length: 4000 mm Bending strength: 45 mm Bending (cold): 38 mm Drive power: 100 kW Number of reels: 4 Adjustable rollers: 3 Type of adjustment of the rollers: hydraulic Top roll diameter: 710 mm Underroll diameter: 640 mm Side roller diameter: 520 mm Working speed: 2+4 m/min (up to 8m/min) Machine weight (with roller): 78 t Accessories Electronic synchronization Air-cooled oil cooler Upper support device Side cylinder support device (10t) Inlet table (20t) hydr. Bubble storage Cone bending device

HAMUEL HSTM 1500 Used 5-axis vertical machining center Make: HAMUEL Model: HSTM 1500 YEAR 2009 X-AXIS TRAVEL 1930 mm Y-AXIS TRAVEL 400 mm Z-AXIS TRAVEL 570 mm RAPID FEEDS X-Y-Z 40 – 40 – 40 m/min SPINDLE 16000 rpm; 54 kW; 136 Nm; HSK 63 B-AXIS ±95 ° MAX ADMITTED LOAD 200 Kg TOOL MAGAZINE CHAIN-TYPE ; 24 POS CONTROL UNIT SIEMENS 840 D WORKING HOURS 9800 WEIGHT 25000 Kg OVERALL DIMENSIONS 6400 x 2800 x 3000 mm ACCESSORIES SWARF CONVEYOR ; PAPER FILTER ; USB PORT ; RENISHAW TOUCH PROBE NOTE MAX PIECE DIMENSIONS: 1750X360 mm; MAX ADMITTED LOAD: 200 Kg; A/C AXIS CONTINUOUS POSITIONER; POSITIONERS: 180 rpm

sheet width: 2500 mmplate thickness: 30 mmpre-bending: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mStocknumber 2210015Type of machine Hydr. 3-roll bending machineMake HAUSLERType RMA 2500/30Build in 1962Type of control conventional Additional informationmax. widht 2500 mmMax. plate thickness 30 mm3 rollsdiameter upper oll 450 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

For sale we offer a bending machine. It is a Demonstration machine used for prototypes in our production department. Therefore, a few operating hours of approx. 154.1 Bh technical data: Bending force: 40T Bending length: 1600mm Distance between columns: 1200mm Stroke (Y-axis): 150mm Open height: 390mm Table width: 120mm Working speed: 15mm/s Fast speed: 150mm/s Return speed (up): 100mm/s Control axis (8 + 1 axis): Z1,Z2, Z1, Z2, R1, R2+V Power: 5.5 kW Control - Delem-DA-66T (Multilingual) Operating Instructions: English Number of strokes: 10645 Price net: 35.000â?¬ Visit possible by prior arrangement. If you are interested, please contact us.

Key data: 200 t, 400 mm

Ref. No. 00785 Description of the plant: Used press brake Manufacturer: Hämmerle Model AP 200 – 3600 Built in 1991 Press force 2000KN (200 T) Ready to work 3600mm Maximum stroke 400mm Projection 500mm Keystrokes 6 Control DNC 7000 Installed power 18.5kW Weight 21,000 kg Condition of the plant under power Immediate Submission Date There are several tools that can be purchased in addition to the machine.

Specifications - three driven rollers, under-rollers can be controlled by motor - Bending and conical rolling - Side bracket or hinged bearing can be swung out - Hydr. Raising and lowering the upper roller - Lateral hydr. Support bearings - Hydr. height-adjustable support arm - Operation of a separate control panel with digital actual value display - max. working width 3100 mm - max. sheet thickness at 240 N/mm² 1.4 x roll diameter 5 mm - 3.0 x roller diameter 7 mm - Top roller diameter 220 mm - Bottom roller diameter 190 mm each - Extended roller ends for placing profile rollers - Drive 400 V / 5.5 kW - Working speed approx. 5.6 m/min - Working speed with bending approx. 0.5 m/min - Space requirement approx. W 5200 x H 4800 x D 2200 mm - Weight approx. 6000 kg

IBRAHIM HORIZONTAL BENDING MACHINE TYPE HP 22 -Capaciteit 22 ton -Hydraulic -Slag 200 mm -Instelling slag -Table 1100 x 625 mm -Twee hands bediening of voetbediening -Centraal smeersysteem -Materiaalaanslag -Noodstop -Documentatie -400V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

The machine can be viewed from 18.01.2023 at the location 94036 Passau by appointment. Specifications: - Printing capacity 11 t - Stroke length approx. 0 - 200 mm - Lifting speed forward / backward 26 - 53 mm/sec - Bending performance - Round tube 90° 48 x 2.6 mm - 180° 42 mm - Flat material flat approx. 60 x 6 mm - upright approx. 40 x 8 mm - Drive 380 V / 1.5 kW - Space requirement approx. W 800 x H 1000 x D 700 mm - Weight approx. 150 kg

We sell on behalf a pipe and profile bending machine of the company Knuth (type KPB 50 ). The condition is AS NEW and has a lot of accessories. Pictures to follow

Kramer Type A Swivel Bending Machine Toll III 2500 Effective length 2500mm Maximum sheet thickness 2.5mm

Swing bending machine Manufacturer Kramer Type V 4000 bending length 4000mm sheet thickness 3.0 mm 100% functional, very good condition

hydraulic concrete steel Benders Krupp Futura B 703 steel bending machine with accessories and complete instructions Tech. Data performance table - steel 50-55 kp/mm2 Diameter 22 mm - 6 bars per bending, 28 mm-4, 32 mm 3,. Mtfgtw 50 mm 2 speed 4-12 / min Operation - with control or manual, operating dial - HAND - machine with possibility of 3 bending angle set - every page - 3 links + 3 right complete documentation, operating instructions much accessories more info upon request You can edit, flat, round steel accessories - various bending rollers, bolts, reducing roll, Overarm and the machine has device for Pipes. Bulk 2.3 x 1 x 1 m, Btto 1500 kg

MTP ESR 2020 X 3.5 E 3-roll plate rolling machine was built in 2020. The machine, designed to bend workpieces with a maximum thickness of 3.5 mm, is a combination of a stable design made of the best quality steel and three rollers with a diameter of 125 mm each, which guarantees the best bending quality and precision. During its service life, the MTP ESR-2020X3.5 E plate rolling machine has been used little and has worked a small number of hours. The total weight of the machine is 1100 kg. Technical data of the plate rolling machine MTP ESR 2020 X 3.5 E - number of rollers: 3 - maximum sheet metal thickness: 3.5 mm - maximum sheet metal width: 2020 mm - roller diameter: 125 mm - roller length: 2070 mm - foot control - motor power: 3 kW - power supply: 3x 400 V; 50 Hz - weight of machine: 1100 kg

OMAHA HORIZONTAL BENDING MACHINE TYPE 20 TONE -Capaciteit 20 ton -Buig capaciteit 200 x 12 mm -Slag 200 mm -Digital uitlezing -Digital slag instelling -Voetbediening -Noodstop -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

OSTAS HORIZONTAL BENDING MACHINE TYPE OHP 10 -Capaciteit 10 ton -Hydraulic -Instelling slag DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

pressure: 28 tstroke: 180 mmtable-size: 300 x 550 mmdiameter of piston: 130 mmwork speed: min. 2 m/secwork speed: max. 9,8 m/secreturn speed: 20 mm/secMax. pressure: 200 barweight of the machine ca.: 0,65 ttotal power requirement: 4 kWdimensions of the machine ca.: 1,15 x 0,75 x 1,1 m• The horizontal bending and straightening press from Profi Press is a universal one Hydraulic press specially designed for performing bending, profiling and Straightening work is designed. The applications of the machine are different and depend on the accessories that are on the work table, theTool holder and are installed in the holes and pin holes.• The HB-28 model is used for light bending measurements on the work tableequipped with an angle scale, and the press can also be equipped with toolsare supplied (for example block punching) that are placed on the tool holderCan be assembled, as well as to ...

sheet width: 1500 mmplate thickness: 10,00 mmpre-bending: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mTop roller diameter: 195 mmIncludes rollers for rolling flat steelClockwise and anti-clockwise rotation via handheld control unitThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Salvagnini S4+P4-2420 Plate Bending and Punching Machine Specifications: Maximum length x width of incoming sheet: 2420 mm Minimum length x width of incoming sheet: 436 x 130 mm Maximum diagonal of incoming sheet: 2220 mm Maximum bending height: 203 mm Maximum material thickness: 2.0 mm Minimum material thickness: 0.5 mm Charging: automatic/manual Load capacity 5000 kg The Salvagnini S4 + P4 system are flexible lines for the production of panels from sheet metal packages. The punching, shearing and bending process is integrated to eliminate material handling. The S4+P4 system can also be operated as separate work cells. The intrinsic flexibility of the individual S4 and P4 systems extends to the hole line. Efficient production: The production process from raw material to finished panel takes place on a single processing line. This offers concrete savings in terms of pro ...

Key data: 20 t, 220 mm

Max. pressing force: 200 kN (20 t) Stroke 220 mm Tool height 130 mm Bolt diameter: 60 mm Stroke triggering via foot switch Weight: approx. 600 kg

Standard configuration? Stable machine frame as a welded, all-steel construction? Ram (press beam), highly resistant to torsional forces? Electrohydraulic downstroke drive via proportional valves? Modern block hydraulics? CNC backgauge with rack-and-pinion drive, for X and R axis, safe adjustment of stop fingers from the front? Modufix upper tool clamping system, manual? Lower tool holder for single-V dies, manual clamping, programmable shifting? Control system: 2D/3D graphic control, Delem DA 69 with 12 color screen (LCD)? Safety equipmentAdditional equipmentCrowning options ? CNC crowningBackgauge system options? 4-axis backgauge system ? 2 additional clip-on stop fingers Tool clamping and angle messuring system? Upper tool claming, hydraulic ? Lower tool clamping, hydraulic? ACB PreparationMaterial handling options? 2 front support brackets

: 100 x 5 mmsquare edge steel: 16 x16 mmround bar steel: 18 mmL-beam: 100 x 8 mmdimensions: 0,9 x 0,25 x 0,3 mweight: 0,025 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: VEB Type: RV16 Machinable cross-section: 120 x 140 mm Weight: 2.7 t

: 100 x 5 mmsquare edge steel: 16 x16 mmround bar steel: 18 mmL-beam: 100 x 8 mmdimensions: 400 x 290 x 280 mmweight: 35 KgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 30 x 8 mmsquare edge steel: 12 mmround bar steel: 15 mmweight: 0,025 t: 51 x 31 x 22 cmdimensions: 135 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.