Pimler için kesme makineleri

TECHNICAL DATA: 01 Saw Aggregate 02 Milling unit 01 Tenoning spindle

SPECIFICATIONS: Sawing unit Milling unit Pinon cutting unit Including tool set

PIN cutting machine Berrone one-sided for window manufacturing with pneum. Stop 1. trimming saw 2. pivot cutters top / bottom 3. Groove cutter L x W x H: 250 x 200 x 200 cm Year of construction 1983 Weight approx. 750 kg The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Double pin cutting and slotting machine model ZA 2 T Longitudinal saw 2 strong milling motors large sliding slide long milling stop LAS pneumatic tool clamp

cut-off saw: , KWSpindle diameter: , mmSpindle length: , mmNumber of tools: , St.Festo slotting machine ZA---------------------------with crosscut saw1 slotted spindleZA length stopFor sale on behalf of the customer in the IS condition!The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tenon beater, slotted and tenon milling machine FESTO Type: ZA101 5 Aggregates 2 x sawing unit 3x milling unit Guide carriage Mitre stop adjustable The machine originates from the age-related abandonment of a small construction and cabinetmaking workshop and is available now. Dismantling and loading can be organized by us. Settlement by appointment. Buyers can also pick up and test the machine themselves on site. Condition see pictures, or please refer to the item description. Parts can also be picked up by yourself. All measurements are approximate. All information to the best of our knowledge but without warranty. Subject to prior sale. The items can be picked up by yourself or shipped at the expense of the buyer. Shipping costs are a guideline. Depending on the agreement of dismantling and loading, or removal, these may differ. Please inquire in advance ...

cut-off saw: 3 KWSpindle diameter: 50 mmSpindle length: 300 mmNumber of tools: 3 St.connected load: 12 kWHaberkorn FZS 1 Studio tenoning and slotting machineMachine is still being checked------------------------------------------------------The compact tenoning and slotting machine forthe unusual window constructions.If you have the highest demands on a tenoning and slotting machineand easiest handling, you can meet them with the FZS 1 Studioright choice.This single shaft tenoning machine with 3 automatic tool positionscontributes to reducing downtimes through quick tool changes and aspecial swivel table for the production of studio windows and segments forArched window.The studio table developed for this purpose has special features that...enable rational work.Precise angle degree display via rotary encoder with 1/10 degree display. displayin the control panel.The splinter wood stays in ...

Technical details: - Spindle diameter: 400 mm - Max. diameter of milling tool: - Mechanical spindle height adjustment with analogue scale - Foldable rolling table - Rolling table travel max. 1,430 mm - Table length: 800 mm - Table width: 385 mm - with eccentric pressure apparatus - 1 x extraction nozzle milling machine, diameter 160 mm - 1 x suction nozzle saw, diameter 80 mm - Max. diameter of saw blade: 400 mm - Saw blade shaft diameter: 30 mm - 1 x saw blade QW 2020 x 400 x30 mounted - 1 x splitting wedge mounted - 2 x engine brake installed - With aliminium length stop (length 3,000 mm) Engine data milling unit: - Voltage: 400 V - Current: 15 A - Frequency: 50 Hz - Power: 7.5 kW - Speed: 2,850 rpm Engine data sawing unit: - Voltage: 400 V - Current: 4.8 A - Frequency: 50 Hz - Power: 2.2 kW - Speed: 2,760 rpm Dimensions (LxWxH): 2,000 x 1,530 x 1,61 ...

KÖLLE Z40 YOC 1983 Rated Current: 20A Milling machine: Motor power: 7.5 kW Speed: 4,000 rpm. 40 mm spindle Clamping height: approx. 190 mm Height adjustment via handwheel (travel: 80 mm) Saw: Motor power: 2.2 kW Speed: 3,000 rpm. 30 mm spindle max. saw blade diameter: 400 mm max. cutting height: 120 mm Sliding carriage eccentric. Workpiece clamping Length fence: 290cm can be swivelled on both sides (up to 45°) Suction connection: 160 + 80 mm Engine Brake Weight: approx. 700 kg Stop ruler available. Machine dimensions with folded table as shown: L: 200 cm W: 130 cm H: 161 cm Sold in ACTUAL condition and unrefurbished from carpentry dissolution. Fixed price.

Cone cutter and profiling machine First working area - OPENING TABLE WITH TRANSPORTBAND Length: 2600 mm, adjustable speed, inverter controlled. Second work area: PRODUCTION AREA Group of eight with movable longitudinal slide and cone cutter unit, numerically controlled. MULTIPLE CONE CUTTER UNIT: Motor with 7.5 HP, 3000 rpm, inverter-controlled, Spindle diameter: 50 mm, length: 270 mm WORKPIECE RETURN

SPECIFICATIONS: Complete with: - Sawing unit diameter mm 250 for head joint - Vertical milling unit shaft diameter mm 35 (max. tool width mm 340) - Hand trolley with tipping guide Installed power of the 2 motors: 5.5 KW + 2.2 KW

SPECIFICATIONS: Cross-cut saws - saw blade diameter: mm 250 Milling unit - shank diameter: mm 35 Height of trunnion cutting shaft: mm 150 Manual guide carriage with 2 tilting guide rails

SPECIFICATIONS: Complete with sawing unit diameter mm 300 Milling unit - spindle diameter 30 mm Manually controlled sliding chimney for tenon cutting