Montaj istasyonları

Manual hand unit: Nein J/NAutomatic for single pieces: Ja J/NAutomatic for frames: Nein J/NClip set 351 on the loose item------------------------------------Manufacturer description:- Base frame in stable welded construction- Clip container as tipping conveyor with separation and feeding the clips- Screwdriver with tipping conveyor for the screws to be separated, feed screwdriver pneumatic with depth adjustment- Conveyor belt length approx. 4,000 mm as NC axis- Contact and clamping cylinder- Electro-pneumatic control via PLC It can programs with different Initial and distance dimensions can be entered- Workflow automatically in flow--------------------------------------Technical specifications:- Screw height 50-120 mm- Profile length 350-3,500 mm- Table height approx. 950 mm--------------------------------------Total price of the machine ex works: on request!Freight costs within Ger ...

Wing stop center Make: ITS Fenstertechnik Type FAZ 2800 No. 526 Built in 1991 With screw feeder Powasert Type ADS-UF Table support with brush strip Table length 2800 mm Table width 1400 mm Table height 950 mm Table can be tilted by approx. 15° Total length 2950 mm Width 2000 mm Height 1000 mm + Screw feeder

0: ja Working width: 2500 mm0: nein Ruchser RU-BM-2500 fitting center with fitting storage, mobile------------------------------------------------------Pneumatic stopsPneumatic magazine screwdriverFittings shelfSupport table covered with feltSpecial screwdriverScrew feederfitting punchCustomer processed Siegenai Titan AF fitting.Can be adjusted to other fittings.(Technical information according to manufacturer - no guarantee!)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: ja, 30 Faecher Working width: 2250 mm0: nein Ruchser RU-BM 2500----------------------Fitting table with fitting shelf 30 compartmentswith olive drilling rigUniqick 2000 screw magazine with feed to the hand screwdriverSelling ex location, can still be viewed in use!(technical information according to the manufacturer - without guarantee!)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: ja, freitstehend Working width: 3000 mm0: ja RUCHSER sash assembly table RU-BM-3000---------------------------------------The Ruchser sash fitting center enables efficient production based on economic aspects. Well thought-out down to the last detail, the system offers maximum ease of use.Important advantages for you:Modular system, the sash assembly table is put together according to your wishes and requirementsEasy to use even for inexperienced workersEquipment demonstration machine, alternative / optional equipment on request!Pos. 1.0: Article no. : 0610000RU-BM-3000, sash assembly table, for sashes up to max. 2500 mm in heightwith RU-SH, special screwdriver length 3000 mm, width 1400 mm, inclination of the work platform manually adjustable.Holder for fitting scissors or fitting punch.10 pieces swiveling commuters for hanging theWing, completely pneumatically foldable forunhindered ...

Dimensions (L,W): 1400 x 1750 mmWeight: , kgtiltable yes/no: ja RUCHSER assembly tilting table RU-MKS 1,4---------------------------------------Universally applicable work table e.g. for frame assembly, roller shutter box assembly, bars, sash fittings, glazingEquipment demonstration machine, alternative / optional equipment on request!Pos. 1.0: Article no .: 8820000RU-MKS-1,4 assembly tilting tableBasic dimensions 1400 x 1750 mm, extended 3400 x 2500 mmSupport surface with 3 support bars, 2 of which are adjustable,one permanently mounted on the upper extension,covered with felt. Support surface with width andHeight / depth pull-out. Pneumatic tilting device,Payload 130 kg. Actuation via foot valve.Roller conveyor can be folded down manually and pulled out to the sidefrom 1400-2500 mm, roll length 140 mmclosed. Roller conveyor height in verticalTable position adjustable from 300-380 mm,Ho ...

0: 2750 mmWorking height: 2500 mm0: 300-1000 mmRUCHSER glazing and sealing table RU-SW3-90° year of manufacture 2022-----------------------------------------------------Vertical work table with lifting device and turning device. EspeciallySuitable for glazing and sealing wooden windows on both sides.Furnishing:System part covered with feltInfinitely variable pneumatic lifting device,Stroke of 300 mm - 1000 mm, based on roller conveyor heightTurning device for sealing on both sides, with roller conveyor 150 mmroll length2 pneumatic tensioners for clamping the window to the turning deviceVersion with special turning device for pushing through the on theRoller conveyor set up window with applied (closed)turning deviceEquipment demonstration machine, alternative/optional equipment on request!Pos. 1.0: Item no.: 1000000RU-SW3-90° vertical work table forWooden window with turning device forG ...

0: 4000 mmWorking height: 2200 mm0: 300 - 800 mmDimensions (length / width): 4800 x 900 x 2500 mmGlazing and control press RU-VGPA 4for glazing, sealing and final inspection.RU-VGPA4 glazing and control pressLength 4800 mm, width 900 mm, height 2500 mm,System height 1900 mm, press beam height 2200 mm.System part covered with felt.Installation area as a roller conveyor,Lifting device from 300 to 800 mm.Two pneumatically foldable and movablepress beam. Simultaneous, synchronous foldingand moving the press beams over a singleFoot valve, therefore requires the least amount of timeOpening and closing the press.Safety control when building up pressure.(Technical description according to the manufacturer - no guarantee!)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 3000 mmWorking height: 2500 mm0: ja jaGlazing press with equipment-----------------Working dimensions:Length: 3,000mmHeight: 2,500mmTotal length: 3,700 mmSystem height: 1,900 mmPress beam height: 2,200 mm-----------------Manual width adjustmentHeight adjustment pneumatic lifting device 500mm-----------------(Technical information according to the manufacturer - no guarantee!)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

FENSTER-UNIVERSAL-DREH-KIPPTISCH RUCHSER-Universal for wing and frame motions. Rotary tipping table with pneumatic tilting device, work platform with 4 loading holes. Height 900 mm-1050 mm adjustable. Lifting device 400 mm 6 storage boxes Fahing facility Used machine without warranty or warranty. Loveling from the Hamburg location unloaded.

0: mmWorking height: mm0: 0Dimensions (L,W): mmWeight: kgadjustable height (yes/no): 0The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: ja 0Working width: , mm0: , 0The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SPECIFICATIONS: Machining center for final processing and assembly of fittings on windows and doors Dimensions workbench mm: 2,800 x 1,250 Three-spindle drilling unit for grip holes Pneumatic system for reading and cutting window handles "Cremonese" Tilting workbench Complete with pneumatic screwdriver

Window assembly station, factory WORKER Width about 3000 mm outdated!