freze makineleri kullanılmış satılık (2,484)

x-travel: 400 mmy-travel: 400 mmz-travel: 300 mmrapid traverse: 1,2 m/minfeed range: 5 - 500 mm/mincreep feed: 1:100 tool taper: ISO 40 stroke: v60 h70 mmtable - universal: ca. 620 x 320 mmtable vertical adjustable: 350 mmweight of the machine ca.: 1200 kgdimensions: mmMachine was used in a public facility and is in good condition.Machine can be viewed under power by prior appointmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1900x1250x1750 mmweight: 600 kgtotal power requirement: 6,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2200x1250x1750 mmtotal power requirement: 6,5 kwweight: 700 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1500x1100x1500 mmWeight: 300 kgTotal power requirement: 3,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 940x1250x1400 mmWeight: 250 kgTotal power requirement: 3,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2500x2100x1800 mmWeight: 1700 kgTotal power requirement: 7,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 980x860x1380 mmWeight: 165 kgTotal power requirement: 0,75 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2500x2100x1800 mmWeight: 1700 kgTotal power requirement: 7,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2200x2000x1950 mmWeight: 700 kgTotal power requirement: 11 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2700x900x1900 mmWeight: 800 kgTotal power requirement: 3,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-hareketi: 400 mmy-hareketi: 350 mmz-hareketi: 400 mmdönüş hızı aralığı: 1 - 4000 U/dakiş mili konikliği ISO: 40 tabla yüzey alanı: 650 350 mmKontrol: Heidenhain TNC 124 toplam güç gereksinimi: 3 kW makine ağırlığı yaklaşık: 1,2 t makinenin boyutları yaklaşık: 2 2 2 mEkipman: Elektronik el çarkı Takım dolabı Bu ilanın verileri, LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.

x-hareketi: 500 mmy-hareketi: 350 mmz-hareketi: 375 mmdönüş hızı aralığı: 63 - 4000 U/dakiş mili konikliği ISO: 40 tabla yüzey alanı: 800 360 mmtoplam güç gereksinimi: 3 kW makine ağırlığı yaklaşık: 1,2 t makine boyutları yaklaşık: 2 2 2 mBu ilana ait veriler, LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.

x-hareketi: 400 mmy-hareketi: 320 mmz-hareketi: 450 mmKontrol: Haidenhain TNC 124 ana iş mili tahriki: 3 kW iş mili hızı sayısı: 63-3150 u/mintakım konikliği: SK 40 dikey tüy stroku: 60 mmbesleme hızları: 5-2000 mm/dakhızlı travers: 2 m/minçalışma masası:: 800x320 mmsoğutma sıvısı: 20 l/daktoplam güç gereksinimi: 5 kW makine ağırlığı yaklaşık: 1,7 t makinenin boyutları yaklaşık: 2,2x2,4x1,6 mBu ilana ilişkin veriler, LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.

x-travel: 10000 mmy-travel: 3000 mmz-travel: 1500 mmControl: Heidenhain TNC 430CA milling head -swivable: 360.000 posspindle turning speed range: 10 - 3000 U/minTools changer: 40 pos.feed: 5000 mm/minRapid Travel X / Y / Z-Achse: 10 / 15 / 15 m/minspindle motor: 37 kWtotal power requirement: 80 kVAweight of the machine ca.: 40 tdimensions of the machine ca.: mTraveling column milling and boring machine- Control Heidenhain TNC 430CA & HR 410- autom. Tool changer with 40 places (SK 50)- Huron Universal milling head, automatic Positioning (A-/B-Axis each 0,001°) - Chip conveyor- OPTIONAL: Rotary Table 3000x3000mm - 30t (W-Axes: 2000mm), with independentFAGOR CNC ControlThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 410 mmy-travel: 310 mmz-travel: 400 mmtable-size: 700 x 280 mmcontrol: Heidenhain TNC 145tool adaptor: SK40 turning speed range: 40- 2.000 U/minrapid speed: 1,5 m/minfeed speeds: 1500 mm/minpower requirement: 2.2 kWquill stroke: 63 mmweight: 1,3 ttotal power requirement: 2,2 kWweight of the machine ca.: 1,5 tdimensions: 1,4 x 2,1 x 2,0 mFeatures:- New TFT screen- Coolant system- Hydraulic tool clamping- Milling head with spindle sleeve- DocumentationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 6500/13150 mmy-travel: 4000 mmz-travel: 1250 mmw-travel: 2250 mmcontrol: Sinumerik 840 D table surface area: 5500/12150 x 3000 mmdistance between columns: 3500 mmmax. distance between table and spindle-nose: 3000 mmmax. workpiece weight: 70000 / 105000 kgram head dimension: 480 x 510 mmspindle turning speed - stepless: 6,3 - 4000 U/minmilling spindle motor: 63 kWmax. torque on the spindle: 3300 Nmtool taper: DIN 39871 AD ISO 50 feed speeds: X/Y/Z= 24000 mm/mintotal power requirement: 120 kVAweight of the machine ca.: 245 tdimensions of the machine ca.: 29 x 7,7 x 8,1 mThe Machine is in almost new condition - in 2020, it was completely retrofit and modernized for 1.6 million Euro!Equipment/accessories:- automatic tool magazine for 153 tools- automatic milling head magazine for 6 milling heads- machining modules/ milling heads: 1. machining module -straight - straight long -  ...

x-travel: 450 mmy-travel: 200 mmz-travel: 465 mmtotal power requirement: 2,6 kWweight of the machine ca.: 1.2 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 400 mmy-travel: 375 mmz-travel: 250 mmtable-size: 600 x 300 mmspindle taper ISO: 40 quill stroke: 50 mmspindle turning speed range: 50-400 , 400 - 3150 U/minCNC-control: TNC 135 voltage: 380 V / 50 Hzfeeds: X+Z = 5 -1000 mm/minrapid traverse: X+Z = 2,4 m/minfeeds: Y = 5 -670 mm/minrapid traverse feeds: Y = 1,6 m/minmeasuring system resolution capability: 0,005 mmtotal power requirement: 3,7 kWweight of the machine ca.: 0,9 tdimensions of the machine ca.: 1,9 x 1,8 x 1,70 m• HEIDENHAIN TNC 135 control,The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ahşap freze, ayarlanabilirWMW VWF35 - 01 ( 35-01 )n 6000 rpm220 x 50 x 35leftYeni !Boyutlar: 250 x 250 x 150 mm

Ahşap frezeWMW VWF35 - 01 ( 35-01 )n 6000 rpm220 x 50 x 35sağYeni !Boyutlar: 250 x 250 x 150 mm

Parmak frezelerGEFRA u.a.HSS parmak frezeler 12 ila 40 mm43 adetkullanılmış, test edildi !Boyutlar: 400 x 200 x 100 mm

Hızlı değiştirilebilir mandrenEMUGEKSN1- MK2 (KSN1-MK2)F3301102.Yeni !Boyutlar: 130 x 50 x 50 mm

GOMAD FG-2 ÜST MİLLİ FREZE MAKİNESİ – 2016 yılı IŞ MILI DÖNÜŞÜ 6000 - 18000 RPM. İŞ MILININ DIKEY HAREKETI 125 MM MASANIN DIKEY HAREKETI 150 MM İŞ MILI EKSENININ GÖVDEDEN UZAKLIĞI 760 MM KAFA DÖNÜŞ AÇISI +45 -45 MASA BOYUTLARI 1180 X 700 MM ELEKTRO MİLİ SOKETİ ER 32 BURÇ RAFI ÇAPAKLAR İÇİN PENS 01 -020 ELEKTRO İŞ MILI 5.6 KW GEREKLI HAVA BASINCI 0,6 MPA TALAŞ ÇIKARMA NOZULU ÇAPI 80 MM TALAŞ HAVA HIZI 25 M/S AŞÇI 750 KG Daha fazlasını burada bulabilirsiniz - / Bize ulaşın -

2008 yılında inşa edilen OPS INGERSOLL Funkenerosion şirketinden OPS 550. Makine ayarlanabilir ayaklar ve 3 ayna içerir. Daha fazlasını burada bulabilirsiniz - / Bize ulaşın -

This 5-axis DMG MORI DMU 95 monoBLOCK was manufactured in 2022. It features a working range of 950 mm x 850 mm x 650 mm, 40 bar IKZ and a motor spindle with a speed of 20,000 rpm. The machine includes a double gripper chain magazine with 60 stations and an NC swivel rotary table with a diameter of 850 mm. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMU 95 monoBLOCK vertical machining centre. Contact us for further details.

Makine: Vert. Frezeleme başlığı Yapım: DECKEL, MAHO, WMW, ... Hepsi döner ve tüy kalemi var! A - Evrensel frezeleme başı, DECKEL, FP3, SK40, 80mm tüy vuruşu ile, alet sıkıştırma Hidrolik ve kontrol paneli ile. Dönme, Fiyat: 1200,- B - Evrensel frezeleme başı, MAHO, SK40, tüy kalemi ve otomatik ile. Takım sıkıştırma, dönme, L-33cm, W-30, H-60, döner cihaz, flanş φ yaklaşık 250mm Fiyat: 1200,- Ayrıca frezeleme milleri de olurdu - SK30 - SK40