Evrensel frezeleme ve delik işleme makineleri

bore capacity in steel (diameter): 28 mmx-travel: 400 mmy-travel: 285 mmturning speeds: 45-4000 U/mintotal power requirement: 3,6 kWweight of the machine ca.: 1,4 tdimensions of the machine ca.: LBH 2,0 x 1,4 x 2,1 m- POS+MAT table- ALBRECHT tool quick change system- VicesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 560 mmy-travel: 500 mmz-travel: 450 mmtable surface area: 900x520 mmturning speeds: 4000 U/mintool taper: SK 40 Control: Heidenhain type: TNC 355 : elec. coolant: total power requirement: kWweight of the machine ca.: 2,7 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 300 mmy-travel: 340 mmz-travel: 250 mmControl: total power requirement: 1,5 kWweight of the machine ca.: 0,8 tHeidenh. 3 axes aktiv digital displayThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 290 mmy-travel: 150 mmz-travel: 330 mmtable surface area: 210 x 600 mmtotal power requirement: 9,5 kVAweight of the machine ca.: 730 kgdimensions of the machine ca.: 2000 x 2200 x 1655 mThe machine is in very good condition and comes from afrom a training workshop.Equipment:Safety cover and LED lamp retrofitted in 20163-axis active digital readout made by HeidenhainFixed angle tableCoolant equipmentTechnical data:Longitudinal table movement, motorised / manual 290/300 mmHeadstock transverse movement, motorised / manual 150/160 mmVertical support movement, motorised / manual 330 / 340 mmWork spindle drive 1.5/1.9 kWNumber of milling spindle speeds 16Speed range 40 - 2000 1/min.Horizontal milling spindle Tool holder Standard taper 40Feed range infinitely variable 5 - 500 mm/min.Creep speed 4 mm/min.Rapid traverse 1200 mm/min.The data for this ad was created with ModulMWS - the so ...

x-travel: 290 mmy-travel: 150 mmz-travel: 330 mmtable surface area: 210 x 600 mmtotal power requirement: 9,5 kVAweight of the machine ca.: 730 kgdimensions of the machine ca.: 2000 x 2200 x 1655 mmThe machine is in very good condition and comes from aa training workshop.Equipment:Safety cover and LED lamp retrofitted in 20163-axis active digital readout from HeidenhainFixed angle tableCoolant equipmentTechnical data:Longitudinal table movement, motorised / manual 290/300 mmHeadstock transverse movement, motorised / manual 150/160 mmVertical support movement, motorised / manual 330 / 340 mmWork spindle drive 1.5/1.9 kWNumber of milling spindle speeds 16Speed range 40 - 2000 1/min.Horizontal milling spindle Tool holder Standard taper 40Feed range infinitely variable 5 - 500 mm/min.Creep speed 4 mm/min.Rapid traverse 1200 mm/min.The data for this ad was created with ModulMWS - the software  ...

x-travel: 500 mmy-travel: 300 mmz-travel: 380 mmspindle stroke: 100 mmturning speeds: 40-2000 U/minTable area: 380x800 mmFeed: 10-500 mm/minFeed: 10-500 mm/minRapid movement: 1500 mm/minspindle taper: ISO: 40 digital readout: Elesta total power requirement: 3 kWweight of the machine ca.: 1,1 tdimensions of the machine ca.: 1,2x1,2x1,7 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mmy-travel: 500 mmz-travel: 450 mmcontrol: Dialog 11 turning speed range - main spindle: 31,5-5.000 U/minpower capacity - main spindel: 7,5 kWtool taper: SK 40 table surface area: Ø 500 mmTool-Presetter:: 30 Stückfeeds:: rapid travel ( X / Y / Z ): 6 m / min. m/minweight of the machine ca.: 4,3 tdimensions of the machine ca.: 3,5 x 2,4 x 2,2 L/B/H mUniversal Milling- and Boring Machine- full covered- coolant system- NC- rotary table- tool changerThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 400 mmy-travel: 400 mmz-travel: 400 mmcontrol: Grundig Contour tool taper: SK40 total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1080 mm, 710 mm, 710 mm

With MILL PLUS iT path control Year of construction: 2005 Travels: X 1080 Y 710 Z 710 Speed range: 0 – 12,000 rpm Infinitely variable (SK 40) With the following accessories: Rigid angle table 1500mm x 800 mm clamping surface NC – Rotary table integrated in rigid table 0 800 mm Controlled swivel milling head (B axis) 3 D touch probe Vertical tool changer with 32 magazine positions (SK 40) IKZ 40 bar Rotoclear Mode 3 + 4 Full protection cabin with sliding doors and interior lighting Electronic handwheel Coolant device, Chip sweeping gun Conveyor Oil mist extraction Integrated screw conveyor , step grate , transport device 3 Height-Adjustable Machine Shoes Operating instructions

Universal Milling & Drilling Machine DECKEL MAHO DMU 50 M With control Heidenhain TNC 124 Year of construction: 2001 Travels: X 500 Y 400 Z 400 Speed range: 20 – 4,500 rpm infinitely variable With the following accessories: Manual swivel – rotary table with digital display for C + B axis 700 mm x 500 mm clamping surface Electronic Handwheel for X, Y, Z Axis Splash protection booth Machine light 4 pcs. Height-adjustable machine shoes Coolant system Operating instructions THE MACHINE WAS ONLY USED FOR APPRENTICESHIP TRAINING THE MACHINE IS IN GOOD CONDITION

Key data: 500 mm, 400 mm, 400 mm

CNC Universal Milling & Drilling Machine DECKEL MAHO DMU 50 T With track control Siemens Year of construction: 2002 Travels: X 500 Y 400 Z 400 Speed range: 20 – 9,000 rpm infinitely variable With the following accessories: Manual swivel – rotary table with digital display for C + B axis 700 mm x 500 mm clamping surface Vertical tool changer with 16 magazine slots Mode 3 + 4 Full protection cabin with interior lighting 4 pcs. Height-adjustable machine shoes Coolant system Operating instructions THE MACHINE IS IN GOOD CONDITION THE MACHINE COMES FROM A TRAINING WORKSHOP

CNC Universal Milling & Drilling Machine DECKEL MAHO DMU 60 T With MILL PLUS iT path control Year of construction: 2002 Travels: X 630 Y 560 Z 560 Speed range: 0 – 12,000 rpm infinitely variable ( HSK 63 ) With the following accessories: Rigid angle table 1000 mm x 600 mm clamping surface 3 D touch probe Electronic handwheel Mode 3 + 4 Vertical tool changer with 24 magazine positions (HSK 63) Full protection cabin with sliding doors and interior lighting IKZ 40 bar Integrated screw conveyor Rotoclear Chip rinsing gun Coolant system 3-Piece Height-Adjustable Machine Shoes Spindle Oil Cooler Transport device Operating instructions

Key data: 750 mm, 600 mm, 520 mm

CNC universal milling machine DECKEL MAHO DMU 70 NEW DMG Design With track control Heidenhain iTNC 530 Year of construction: 2013 Travel : X 750 Y 600 Z 520 Speed range : 20 – 14,000 rpm infinitely variable ( HSK 63 ) With the following accessories: Swivel rotary table for 5-axis simultaneous machining Ø 800 mm x 620 mm Electronic handwheel 3 D Probe Heidenhain Mode 3 + 4 Vertical tool changer with 30 magazine positions ( HSK 63 ) Sealing Air for Linear Measuring System Conveyor IKZ 40 bar Rotoclear Chip Sweeping Gun 4 pcs. Height-adjustable machine shoes Coolant system Operating instructions THE MACHINE WAS ONLY USED FOR APPRENTICESHIP TRAINING THE MACHINE HAS ONLY 3218 PROGRAM RUNNING HOURS THE MACHINE IS IN VERY GOOD MINT CONDITION

Key data: 300 mm, 200 mm, 350 mm

1 universal tool milling machine Make: EMCO Model: FB 3 Year of construction: 2008 Travel X-Y-Z: 300 x 200 x350 Table size: 600 x 200mm Tool holder: SK 40 Spindle speed up to: 2800 rpm. Feed range: 850 - 550 rpm. Rapid traverse: 1200 rpm. Table load: 50 kg. Equipment/Accessories: Digital display made by Heidenhain Rigid angle table

Universal milling machine vertically / horizontally from a training workshop Manufacturer Hermle Type FW801 Tool holder SK40 automatic feed in three axes Digital display in three axes Machine technically in very good condition under electricity ready for demonstration Technical data: Travel: x=350mm y=150mm z=220mm Spindle speeds from 50 to 3,150 rpm can be infinitely variable Feed speed infinitely adjustable via rotary pot from 10 to 5,000 mm/min, aisle Special price Used milling machine Hermle FW 801

bore capacity in steel (diameter): 32 mmx-travel: 510 mmy-travel: 240 mmtable surface area: 750 x 200 mmcutter diameter max.: 30 mminserted tooth milling cutter dia.: 100 mmspindle taper: MK 3 quill stroke: 130 mmspindle turning speed range: 75 - 3200 U/minno. of turning speeds: 12 x links, 12 x rechts throat: 278 mmmax. distance between table and spindle-nose: 600 mmvoltage: 400 V / 50 Hztotal power requirement: 1,1 kWweight of the machine ca.: 360 Kgdimensions of the machine ca.: 0,9 x 0,75 x 2,0 m• unused machine for demonstration purposes,• Machine is equipped with an adjustable depth stop,• Vertical adjustment of the milling head via dovetail guide,• Boring head adjustable to left and right til 360°,• with sturdy bottom-table.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Universal tool milling machine KUNZMANN WF 4/3 With 3 axes Heidenhain digital display Year of construction: 1996 Travels: X 400 Y 320 Z 400 Speed range: 40 – 2550 rpm With the following accessories: Rigid angle table 800 mm x 360 mm clamping surface Mechanical handwheels for X, Y, Z axle Hydraulic tool clamping Automatic central lubrication pump for X, Y, Z axis Machine light 4-Piece Machine Shoes Coolant system Operating instructions THE MACHINE WAS ONLY USED FOR APPRENTICESHIP TRAINING THE MACHINE IS IN GOOD CONDITION

Kunzmann Universal Milling and Drilling Machine WUF5/3 with Heidenhain ND 780 Built in 1989 in good condition. Technical data WUF5/3: Position indicator Heidenhain ND 780 The ND 780 position indicator is particularly suitable for use on milling, drilling and turning machines with up to three axes. Router table: Clamping surface 850x350 mm Clamping grooves 5 Groove width 14H7 mm Groove spacing 63 mm Workspace: Longitudinal (X-axis) 490 mm Transverse (Y-axis) 310 mm Vertical (Z-axis) 400 mm Max. distances: Top of the table up to Horizontal spindle centre 40 – 420 mm Top of the table up to Vertical head lower edge 350 mm Milling spindle: Tool holder SK40 Horizontal speeds 40 – 2500 min-1 Vertical speeds 40 – 2500 min-1 Quill stroke 60 mm Vertical head can be swivelled on both sides + - 90° Feed rate 1000 mm/min Rapid traverse 4000 mm/m ...

For sale: Lagun universal milling machine type FU TV 125 The machine is in good condition and has a table surface of 1,250 x 280 mm and is equipped with T-slots (3 x 16 mm). The movement of the X, Y and Z axes is 850 x 290 x 475 mm The spindle holder is ISO 40. The maximum variable speed is 1,800 rpm. The spindle head can rotate from side to side and tilt from front to back! The longitudinal and transverse feed movement is 2,500 mm/min and 750 mm/min. The maximum main engine power is 5.5 hp. The maximum workpiece weight on the table is 300 kg. The total weight of the machine itself is 2,000 kg. Available from stock, subject to prior sale.

Heidenhain TNC 124 Year of construction 1996 Spindle holder ISO 40 Travel 310 x 170 x 340 mm 16 spindle speeds from 40 - 2500 rpm Infinitely variable feeds Weight approx. 700 kg

CNC universal tool milling machine MAHO MH 500 W 4 With path control Philips CNC 432 Year of construction: 1990 Travel: X 500 Y 380 Z 350 Speed range: 20 – 5000 rpm infinitely variable With the following accessories: Rigid angle table 800 mm x 360 mm clamping surface Mechanical handwheels for X, Y, Z axle Hydraulic tool clamping Automatic central lubrication pump for X, Y, Z axis Splash protection booth Machine light 4-Piece Machine Shoes Coolant system Operating instructions THE MACHINE WAS ONLY USED FOR APPRENTICESHIP TRAINING THE MACHINE IS IN GOOD CONDITION

Key data: 500 mm, 350 mm, 375 mm

Control: MAHO 132 Direct displacement measuring system Vertical and Horizontal Spindle Table dimensions: 254x354 mm X-axis travel : 500 mm Y-axis travel : 350 mm Z-axis travel: 375 mm Tool holder: ISO40 Hydromechanical tool clamping. Quill stroke vertical spindle: 50 mm Spindle speed: 63-4,000 rpm Coolant basin and pump Chip pan Manual central lubrication Power supply : 380/50 V/Hz Total connection: 8 kVA Weight approx.: 1650 kg Machine dimensions LxWxH: 2,050x1,430x1,812 mm

Key data: 560 mm, 500 mm, 400 mm

used milling machine Mikron WF31D Control Heidenhain TNC407 Built in 1998 Switch-on hours 8000 h Spindle speed 4000 rpm Feed rate 2-3000 mm/min Adapter SK40 Removable vertical head Prices plus currently valid VAT (domestic) The sale of used machines is carried out under exclusion of any warranty and guarantee for overt and hidden defects. Prior sale, changes and errors in the technical data and information reserved.

x-travel: 600 mmy-travel: 210 mmz-travel: 425 mmtable-size: 950 x 230 mmturning speed range: 31,5 - 1250 U/minpower requirement: 1,5 kWtool adaptor: ISO 40 |feed speeds: 4- 250 mm/min |weight: 1,1 trange L-W-H: 1,8 x 1,5 x 1,63 mUniversal tool room machine- turn- and swiveling v- head. h- spindle- automatic feed- hand wheels- coolant system- machine light- 16 gear stepsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data: -Table size 1600 x 370 mm -Work area of the axles -X (longitudinal) 1000 mm -Y (transverse) 320 mm -Z (vertical) 420 mm -Milling head left + right Tilt + Swivel - 9 table feeds 20-800 mm / min -Rapid traverse longitudinal / transverse 3000 mm/min -Rapid traverse vertical 1375 mm / min -maximum distance spindle - top 480 mm -min / max distance spindle Center / stand 450 mm -Tool holder ISO 50 - work spindle speeds in 12 levels adjustable 45-1400 RPM - coolant system - powered 400 V / 5,8 kW -Space requirement approx. B H 2100 x 2200 x D 2800 mm -Weight approx. 3500 kg

x-travel: . mmy-travel: . mmz-travel: . mmControl: Heidenhain type: TNC 135 table surface area: 1300x400 mmturning speeds: 2800 U/mincoolant: total power requirement: kWweight of the machine ca.: tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Overall size: 1600x2000x1600 mm Table size: 1200x250 mm Moving rate: 500x250x300 mm