Evrensel freze makineleri

digital readout: HEIDENHAIN Number of axles: 3 St.x-travel: 760 mmy-travel: 350 mmz-travel: 500 mmtable surface area: 1300x320 mmmax. table loading capacity: 400 kgspindle head adjustment: 0-510 mmspindle cone ISO: 40 turning speed range: 55-3000 U/minfeeds -stepless-: 0-3000/0-1200 mm/minfeed motor: 3 kWtotal power requirement: 7.5 kWweight of the machine ca.: 2.3 tdimensions of the machine ca.: 2.2x1.8x2.0 mvice: jaw width: 300 mmCoolant installation: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: 3 AXES Stroke 800 x 600 x 600 mm Collection on: 29/04/2024  ,  ,Collection times by arrangement  , IMPORTANT: Collection times may vary if separate collection times are explicitly stated in  ,in the item descriptionApprox. Onsite Dimension. (l x w x h): 3,660 x 3,740 x 1,990 mm, weight approx.: 3,500 kg

Description: Longitudinal stroke 810 mm Transverse stroke 320 mm Vertical stroke 525 mm Collection on: 06/05/2024  ,  ,Collection times by arrangement  , IMPORTANT: Collection times may vary if separate collection times are explicitly stated in  ,in the item descriptionApprox. Onsite Dimension. (l x w x h): 1,800 x 1,850 x 1,930 mm, weight approx.: 2,050 kg

Description: Longitudinal stroke 810 mm Transverse stroke 320 mm Vertical stroke 525 mm 3-axis display Collection on: 06/05/2024  ,  ,Collection times by arrangement  , IMPORTANT: Collection times may vary if separate collection times are explicitly stated in  ,in the item descriptionApprox. Onsite Dimension. (l x w x h): 1,800 x 1,700 x 1,900 mm, weight approx.: 2,050 kg

x-travel: 1600 mmy-travel: 920 mmz-travel: 900 mmtable surface area: 1800x700 mmT-slot - distance: 120 mmTable load: 3000 kgspindle taper ISO: 50 power capacity: 22/30 kWspindle turning speed range: 60-3000 U/mintotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mAbout usmore than 400 machines in the warehouse over 12000 m² storage area,crane capacity 70 tmore than 1000 items accessories for your workshopYou wantto sell machines production lines or your company, then talk to us.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 400 mmy-travel: 310 mmz-travel: 330 mmtaper in main spindle: SK 40 table surface area: 750 x 280 mmturning speeds: 56 - 1800 U/minquill stroke: 80,0 mmtotal power requirement: 2,2 kWweight: 1200 kgrange L-W-H: 1700 x 1300 x 1200 mmFurnishing :- robust / conventional universal milling machine- Right / left running of the work spindle- Service, front right- rotatable universal milling head- manual milling spindle feed, with locking- Stable T-slot clamping/angle table- foldable milling spindle protection- Coolant device in the machine baseThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Swivelling head, travel X approx. 400 mm, Y approx. 200, Z approx. 300 mm, speed range 56 to 1800 rpm, feed rates 11.2 to 355 mm/min, machine is equipped with a counter bearing for horizontal milling, for further details see photosApprox. Onsite Dimension. (l x w x h): 1,500 x 1,500 x 1,700 mm, weight approx.: 2,800 kg

x-travel: 560 mmy-travel: 300 mmz-travel: 420 mmdigital readout: 3 Achsen HEIDENHAINtable-size: 1100 x 250 mmspindle turning speed range: 40 - 1180 U/minspindle taper ISO: 40 feeds: 18 - 384 mm/minmilling motor: 3,7 kWcoolant: voltage: 400 Vtotal power requirement: 5,5 kWweight of the machine ca.: 1,1 tdimensions of the machine ca.: 1,45 x 1,70 x 1,90 m- Serial-No.: 6760- 3-axis digital readout HEIDENHAIN- rapid traverse- central lubrication- coolant device- machine lightThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 750 mmy-travel: 250 mmz-travel: 400 mmspindle taper ISO: 40 ISOtable:: 1270 x 260 mmfeed:: 24 - 402 mm/min.turning speeds: 45 - 1660 U/mindistance spindle /table: 175 - 520 mmrapid traverse: Z Achse 660 mm/minthroat: 0 - 550 mmtotal power requirement: 2,2 kWweight of the machine ca.: 1.400 kgrange L-W-H: 1715 x 1470 x 1660 mmFurnishing :- Universal milling head, adjustable to all angular positions- Swiveling control panel with ergonomically mounted switches- Heavy machine stand made of gray cast iron for vibration-free work- Dovetail guide with adjustable V-ledges in all 3 axes- Very smooth running thanks to ground gear wheels running in an oil bath- Positioning motor for z-axis included in delivery- Standard with automatic table feed in x and y axes- Precise surface-machined cross table with T-slots- Digital position display for x, y and z axes included in the scope of deliver ...

x-travel: 750 mmy-travel: 250 mmz-travel: 400 mmspindle taper ISO: 40 ISOtable:: 1270 x 260 mmfeed:: 24 - 402 mm/min.turning speeds: 45 - 1660 U/mindistance spindle /table: 175 - 520 mmrapid traverse: Z Achse 660 mm/minthroat: 0 - 550 mmtotal power requirement: 2,2 kWweight of the machine ca.: 1400 kgrange L-W-H: 1715 x 1470 x 1660 mm current new price ~ 13.500 euros Special price on requestThe universal milling machine UWF 110 is suitable for this purposeof light and medium-heavy milling work. Thanks to their greatVersatility and easy conversion, it can be used in workshopsfor successfully processing small and medium-sized series be used.Furnishing :- Universal milling head, adjustable to all angle positions- Swivel control panel with ergonomically positioned switches- Heavy machine stand made of gray cast iron for vibration-free work- Dovetail guide with adjustable wedge strips in all  ...

x-travel: 1000 mmy-travel: 360 mmz-travel: 400 mmspindle taper ISO: 40 ISOtable:: 1370 x 300 mmfeed:: 30-830 / 23-625 mm/min.turning speeds: 45 - 1660 U/mindistance spindle /table: 60 - 460 mmrapid traverse: Z Achse 750 mm/minthroat: 95 - 575 mmtotal power requirement: 3,0 kWweight of the machine ca.: 1505 kgrange L-W-H: 1740 x 1860 x 1900 mmThe universal milling machine UWF 110 Servo is suitable for the execution of light and medium-heavy milling work. Thanks to their great versatility andIt can be used in workshops for machining small and simple conversionsmedium-sized series can be used successfully. Special features of thisThe machine is the swiveling work table, the flat guide in the y and z axesand the servo drive for feeds and rapids in all axes.scope of delivery : - 3-axis digital display ES-12 H with LCD display- Tightening spindle M16- LED machine light- Feed for x, y and z axi ...

x-travel: 400 mmy-travel: 200 mmz-travel: 400 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mSK40, xyz 400mm/200mm/400mm, table size 750mm x 300mmspindle speed 40-1600rpm, infeed 8-320mm/minweight ca. 2000kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

aschinella details Warehouse number 1105-03375 Machine type Milling machine - Universal CmE brand Type FC 1100 Year of construction 1991 Control type NC Storage location FRANCE Country of origin spain Delivery time immediately Freight base from stock Technical details x-travel 1100 mm y-travel 700 mm z-travel 500 mm Receiving cone of the main spindle 40 SK Motor power 10.6 kW Table clamping surface 1400 x 450 mm Speed 40 - 1800 rpm Dimensions L-W-H 2.4 x 2.15 x 2.1 mm Machine weight approx., 3800 kg Information Equipment: - Heidenhain - Control model TNC 124 - Universal milling head "Huron" design - 2 counter holders for horizontal milling - autom. Tool clamping - Lighting - Central lubrication

Universal milling machine. Table size: 1400mmx300mm. Longitudinal travel: 1200mm. Cross travel: 320mm. Vertical travel: 500mm. ISO40. Hure head. Speeds: 12. (40-1800rpm). Motor power: 7Kw.

Universal milling machine with automatic movement ram. Table size: 1700mmx380mm. Longitudinal travel: 1350mm. Cross travel: 350mm. Vertical travel: 525mm. Vertical head. ISO50. Motor power: 12,5cv. Equipped with DRO Fagor.

Universal milling machine. Table size: 1700mmx380mm. Longitudinal travel: 1350mm. Cross travel: 350mm. Vertical travel: 525mm. ISO50. Motor power: 12,5cv. Equipped with DRO Fagor.

Table size: 440 x 1200 mm table movement x: 950 mm table movement y: 250 mm table movement z: 475 mm spindle retainer: ISA 40 spindle speeds: 40-1800 rpm feeds longitudinal & cross: 16-630 mm / min feed vertically: 5.6-224 mm / min. Supply: 380 V, 7.5 kVA kW space: 2150 x 2000 x 2100 mm weight: 2400 kg

Universal milling machine. Table size: 1200mmx320mm. Longitudinal travel: 950mm. Cross travel: 300mm. Vertical travel: 500mm. ISO40. Hure head. DRO Fagor.

Correa F3UE universal milling machine. Table: 1400mmx340mm. Longitudinal travel: 1100mm. Cross travel: 320mm. Vertical travel: 500mm. ISO50. Hure head. Speeds: 18. (28-1400)

Universal milling machine. Hure head. Table size: 2000x480mm. Longitudinal travel: 1700mm. Cross travel: 400mm. Vertical travel: 575mm. ISO50. Motor power: 20cv. Weight: 5500Kgs. Dimensions: 2550x2380x2680.

Description: Milling machine - universal, control type NC, control name Heidenhain ND 523, technical details, x-travel 300 mm, y-travel 160 mm, z-travel 340 mm, control Heidenhain ND 523, total power requirement 1.5 kW, machine weight approx. 0.8 t, additional information, digital display Heidenhain ND 523 - 3 axes active control - variable feed rate in 2 axes, rapid traverse in 2 axes, probe Y-axis not availableApprox. Onsite Dimension. (l x w x h): 1,500 x 1,500 x 2,000 mm, weight approx.: 800 kg

x-travel: 300 mmy-travel: 150 mmz-travel: 340 mmturning speeds: 60 - 1900 / 9.5 - 1.200 U/mintable:: 600 x 250 mmspindle taper: MK 4 // 20 x 2 feed range: ~ 10 - 500 mm/mintotal power requirement: 1.5 kWweight of the machine ca.: 750 kgrange L-W-H: 1250 x 1200 x 1800 mm from a training workshop (BOSCH) maintained condition ()Furnishing:- electro-motoric universal milling machine- conventional - easy to use- electro-motor feeds: X and Z axis- manual feed via handwheel: Y axis- robust work table with 5x T-slots- rotatable vertical milling head (SN 5287)- vertical & horizontal work spindle (without counterholder)- separate control cabinet- Coolant system with chip collection tray- Machine light (retrofitted)- EMERGENCY stop button (retrofitted)- User manual (PDF) Machine link:http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno =1008-9131207The data for this ad was created with ...

Machine Details Stock-No. 1105-03873 Type of machine Tool Room Milling Machine - Universal Make DECKEL Type FP 1 Year of manufacture 1985 Type of control conventional Storage location HAGUENAU FRANCE Country of origin Germany Delivery time immediately Freight basis ex Warehouse Technical details X-Travel 300 mm Y-Travel 150 mm Z-Travel 340 mm tool taper SK 40 spindle turning speed range 40 - 2000 rpm Feeds 10 - 500 mm/min table-size 600 x 210 mm engine output 1,5 / 1,8 kW Weight of the machine approx. 700 kg dimensions of the machine approx. 1.6 x 1.2x 1.6 m Additional information NICE MACHINE WITH UNIVERSAL TABLE

Universal milling machine Deckel FP1 Machine Operating voltage: 380/400 volts without feed in y direction, with angle table, work surface with 4 T-slots Condition see pictures Errors excepted!

- 3-axis digital display - Vertical milling head swivels - Coolant device with mechanical pump in the machine base - Control cabinet next to it - Machine-light

Universal – Milling Machine Make: Deckel Type: FP 4 A Year of construction: 1985 Controls: Contour 1 Travel: x-485 mm y-385 mm z-380 mm Quill stroke: 80 mm Main drive: 3.7 / 4.4 kW Speeds: 18 steps 50 -2500 rpm Mounting: SK 40 Feed rate: 10 – 1000 mm/min Rapid traverse: 2000 mm/min Table size: 800 x 460 mm Weight: approx. 1800 kg

- travel range: X= 485, Y= 385, Z= 380 mm - table size: 800 x 460 mm - tool holder: SK 40 - dimensions LxWxH: 2440 x 1800 x 2100 mm - weight: ca. 2.000 kg

Key data: 800 , 600 , 550

Manufacturer: Lid Type: FP 5 CC Year of construction: approx. 1986 Table: 1500 x 675 mm Longitudinal path: (X,Y,Z axis) 1200x600x500mm Tool changer: no Tool holder: SK 40 Vertical spindle speeds: 20-6300rpm Feeds: 2-5000mm/min Connection: 50 Hz 3x 380V Spindle motor: 7.5KW Machine weight: approx. 8200kg Dimensions: 3300x2400x2400mm

DECKEL FP2 NC Dialog 11 Universal Milling Machine Milling Machine Travel X/300 Y/300 Z400 mm (340 mm for universal table in Z-axis) Speed infinitely variable 31.5 ... 5000 rpm Feeds 2-4000 rpm Rapid traverse 4000m/min Tool holder SK 40 Pinole stroke 80 mm Machine weight 1345 kg Main drive 5.5 kW Power consumption 11 kW The machine is currently being revised.

The machine is in good condition and can be inspected under power by appointment. Specifications: X: 500 mm Y: 300 mm Z: 380 mm Milling spindle by hand: 100 mm 18 spindle speeds: 40 - 2000 rpm 18 feeds X, Y, Z: 10 - 500 mm/min Rapid response: 1500 mm/min Clamping surface angle table horizontal: 700 x 320 mm Motor: 3 kW, 1420 rpm Dimensions approx.: 1500 x 1500 x 1800 mm Weight: approx. 1.5 t

Description: Deckel FP 3 - E with Weinreich control. Travel X: 500 mm, Y: 300 mm, Z: 380 mm Tablesize: 800 x 370 mm Spindle: SK 40 M16, Stroke 80 mm Spindlespeed: 40 - 2000 U/min. Spindledrive: 3 kW vertical milling head swivelable. Machine is sold in unchecked condition. The machine vice is not part of the offer.Approx. Onsite Dimension. (l x w x h): 2,000 x 1,600 x 1,900 mm, weight approx.: 2,000 kg

Description: SPECIFICATIONS Feature: DECKEL CNC Control: Dialog 11 Type: FP4A Sheet size: 900 x 530 mm Top name spindle: ISO 40 mm Horizontal & vertical milling Manual availableApprox. Onsite Dimension. (l x w x h): 2,250 x 2,500 x 2,000 mm, weight approx.: 2,000 kg

Lid FP4A Id No. 2284-0242 CNC 2301 control x 560 y 500 Z 450 Weight 2.2 t Hydraulic Data Machine has a malfunction in the startup procedure !

Deckel FP2lb Universal Milling Machine

DECKEL FP 33 Research device for the tool room – Universal X/Y/Z – 1000 x 400 x 600 mm Table mounting surface 1200 x 640 mm Speed range 31.5 – 1600 rpm Tool holder ISO 50 Power capacity 5.5 kW Feed range 8 – 400 mm/min Express feed 1600 mm/min Total power requirement 8 kW

Universal milling machine Ecomil 100 Heidenhain Control TNC 124 SK 50 56 shots with tools Spindle head swivel Quill extendable 700 x 2000 clamping area Control retrofitted. Feed continuously variable all axes Rapid traverses Length 3.20 m Width 2 m Height 3.50 m Weight 14 tons Spindle 20 - 1000 rpm T slots 22/42 min distance 140 mm

x-travel: 600 mmy-travel: 400 mmz-travel: 400 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Longitudinal stroke 710 mm Transverse stroke 250 mm Vertical stroke 400 mm Collection on: 06/05/2024  ,  ,Collection times by arrangement  , IMPORTANT: Collection times may vary if separate collection times are explicitly stated in  ,in the item descriptionApprox. Onsite Dimension. (l x w x h): 2,220 x 1,740 x 2,100 mm, weight approx.: 1,600 kg

EUROMETAL FU-32B universal milling machine was built in 2008 in Poland. The process of precision machining of workpieces is performed on a large work table with a length of 1320 mm and a width of 315 mm using a highly efficient spindle rotating at a maximum speed of 1800 rpm. The total weight of the EUROMETAL FU 32B machine is 2100 kg. Technical data of EUROMETAL FU-32B milling machine - work table dimensions (L x W): 1320 x 315 mm - feed rate in the X/Y axis: 850/235 mm - spindle rotational speed: 1800 rpm - distance between spindle axis and table: 400 mm - spindle drive motor power: 5.5 kW - feed drive motor power: 1.5 kW - dimensions (L x W x H): 2000 x 1474 x 2080 mm - EUROMETAL FU32B machine weight: 2100 kg

Universal milling machine with automatic movement ram. Table size: 1600mmx320mm. Longitudinal travel: 1200mm. Cross travel: 300mm. Vertical travel: 600mm. ISO50. Hure head. Equipped with DRO Fagor.

Key data: 250 mm, 150 mm, 340 mm

- Well-maintained collector's item with lots of accessories and tools - Lid bumper head - Swivel angle table -Vice - Workspace lighting - Tool table Specification Travel: - X-axis: 250 mm - Y-axis: 150 mm - Z-axis: 340 mm Table: - Clamping surface: 600 x 260/200 mm - T-slots: 5 - T-slot width: 12 mm - Table rotation range: ± 30° - Table swivel range: ± 30° - Vise wingspan: 105 mm Spindle: - Spindle speed: 20 - 2000 rpm - Vertical speed range: 60 - 1200 rpm - Horizontal speed range: 95 - 1900 rpm - Speed levels: 12 - Feed range: 8.5 - 475 mm/min - Feed stages: 10 - Spindle mount: MK4 - Quill stroke vertical: 65 mm - Milling head swivel range: ± 90° Machine data: - Motor power: 1.4 kW - Operating voltage: 400 V - Dimensions WxHxD: approx. 9000 x 1700 x 1150 mm - Machine weight: approx. 800 kg

x-travel: 0,0 mmy-travel: 0,0 mmz-travel: 0,0 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The FU 251 universal milling machine was built in 1983. The machine is equipped with a table with dimensions (L x W) 1120 x 250 mm. The mechanical feeds of the working table in the X / Y / Z axis are respectively 765/230/390 mm, and manual feeds are 785/250/410 mm. The milling machine has three T-slots with a spacing of 14 mm and a steady rest. The total weight of the machine is 2 tons. Technical data of the universal milling machine FU 251 - working dimensions of the table (length x width): 1120x250 mm - mechanical table feeds in the X / Y / Z axis: 765/230/390 mm - manual table feeds in the X / Y / Z axis: 785/250/410 mm - accelerated longitudinal and transverse feed: 2500 mm / min - accelerated vertical feed: 1040 mm / min - longitudinal and transverse feed speed range: 12.5-630 mm / min, - vertical feed speed range: 5.2-262 mm / min - speed range of the longitudinal and  ...

Description: Longitudinal stroke 1000 mm Transverse stroke 520 mm Vertical stroke 710 mm Collection on: 06/05/2024  ,  ,Collection times by arrangement  , IMPORTANT: Collection times may vary if separate collection times are explicitly stated in  ,in the item descriptionApprox. Onsite Dimension. (l x w x h): 2,700 x 2,700 x 2,300 mm, weight approx.: 4,500 kg

Description: Longitudinal stroke: 1000 mm Transverse stroke: 420 mm Vertical stroke: 710 mm 3-axis display Collection on: 29/04/2024  ,  ,Collection times by arrangement  , IMPORTANT: Collection times may vary if separate collection times are explicitly stated in  ,in the item descriptionApprox. Onsite Dimension. (l x w x h): 1,950 x 2,300 x 1,950 mm, weight approx.: 3,800 kg

x-travel: 550 mmy-travel: 155 mmz-travel: 350 mmtaper in main spindle: MK 3 table surface area: 640 x 200 mmturning speeds: 50 - 1500 U/minfeeds: 30 - 340 mm/mindistance spindle - column: 165 mmdistance spindle nose and table: 245 mmvoltage: 380 Vtotal power requirement: 1,3 kWweight: ca. 1250 kgrange L-W-H: 950 x 1000 x 1600 mm from a vocational school (!)Furnishing :- robust / conventional universal milling machine- rotatable / swiveling vertical milling head- Stable T-slot clamping/angle table- automatic table longitudinal movement- Feed range adjustable - 8x steps- Pole-changing drive motor- 1x dividing head with jaw chuckThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 550 mmy-travel: 155 mmz-travel: 350 mmtaper in main spindle: MK 3 table surface area: 640 x 200 mmturning speeds: 50 - 1500 U/minfeeds: 30 - 340 mm/mindistance spindle - column: 165 mmdistance spindle nose and table: 245 mmvoltage: 380 Vtotal power requirement: 1,3 kWweight: ca. 1250 kgrange L-W-H: 950 x 1000 x 1600 mm from a vocational school (!)Furnishing :- robust / conventional universal milling machine- rotatable / swiveling vertical milling head- Stable T-slot clamping/angle table- automatic table longitudinal movement- Feed range adjustable - 8x steps- Pole-changing drive motorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

New drive shafts for Vertical and Universal Fraeshead FU 400 - FW 400 HECKERT Germany Price 900,-- Euro per square plus VAT

Table clamping area: 190 x 710 mm Table movement x: 390/360 mm Table movement y: 150 mm Table movement z: 280 mm Spindle holder: SK 40 Spindle speeds: 100 - 3100 rpm Feeds longitudinal 0 - 600 mm/min electr. Connection: 380 V, approx. 1.5 kW Space requirement: 1400 x 1200 x 1500 mm Weight: approx. 680 kg

Offer 23401 Specifications: - Table size vertical: 800 x 220 mm - Angle table 800 x 395 mm - Working range of axes - X (longitudinal) Autom. / Hand 630 / 650 mm - Y (landscape) Autom. / Hand 430 / 450 mm - Z (vertical) 400 / 420 mm - min. / max. distance milling spindle – table surface approx. 10 - 430 mm - Tool holder ISO 40 - 12 working spindle speeds 45 - 2000 rpm - Feed rates X ; Y ; Z infinitely variable 10 - 4500 mm/min - Drive spindle 400 V / 4.0 kW - Space requirement approx. W 2450 x H 1850 x D 2470 mm - Weight approx. 1500 kg - With: - Movable vertical milling head with drill quill - Vertical milling head can be swivelled left + right - Handwheels for X ; Y ; Z - Axes - Control HEIDENHAIN TNC 135 - Coolant device - Hydr. Machine Vise