Cnc freze makineleri

Control : Heidenhain TNC 310 Table Clamping surface 1200 x 450 mm Longitudinal travel 650 mm Transverse travel 480 mm Vertical travel 475 mm T-slots 6 x 18 H7 Maximum load 400 kg Distance Distance between T-slots 65 mm Spindle centre to underside counter holder 160 mm Feeds Longitudinal feed speed 0 – 4000 mm/min Transverse feed speed 0 – 4000 mm/min Vertical feed speed 0 – 1500 mm/min Rapid traverse Longitudinal feed 4000 mm/min Transverse feed 4000 mm/min Vertical feed 1500 mm/min Spindle Spindle cone ISO 40 Spindle speeds, number 2 Speed range 55 – 3000 rpm Head rotatable 0 - 140° Engines Spindle motor, 2800 rpm 7.5 kW Feed motor, Z, AC 10.5 Nm Feed motor, X+Y, AC 3.0 Nm Cooling pump 0.12 kW Proviso Length 2200 mm Width 1800 mm Height 2000 mm Weight Net weight 2100 kg Gross weight 2300 kg

Clamping pads, fork clamping iron, tension screws clamping stops, clamping pins; Step claw

WE OFFER AN LOW HOURS ARES SEIKI COMPLETED WIITH TOOLINGS POWER ON 39010 H OPERATING HOURS: 3436 H WORKING HOURS: 4519 H DESCRIPTION: Ares Seiki R Series R4530 CNC High Performance/ High Speed Production Center DIRECT DRIVE SPINDLE - HIGH SPEED 3 AXES RAPID TRAVERSE HIGH RESPONSE SERVO SYSTEM TECHNICAL INFO: X : 450 mm Y : 300 mm Z: 300 mm RPM12,000 RPM ATC12 TaperBT30 Dimensions1200mm x 2230mm x 2480mm WEIGHT : 2200 KG MACHINE WILL BE AWAILIBLE TO LOAD IN NEXT WEEKS

Control Heidenhain TNC 620 Travel X 400 mm Travel Y 315 mm Travel Z 350 mm Table clamping surface 710 x 315 mm Recording ISO 40 Distance from spindle nose to table 100 / 450 mm Max. horizontal spindle speed 3000 rpm Max. vertical spindle speed 3000 rpm Drill quill: 80 mm Rapid traverses X,Y,Z 5,5,3 (m/min) Power KW 10.5 (13.7) Dimensions LxWxH 1'520×2'2130×2'1950 Weight approx. 1700 kg

Key data: 3000 mm

CNC gantry machining center AWEA LP3016YF with Fanuc control very good condition immediately available. Dismantling and loading onto suitable trucks is cost-effective. Installation and commissioning on request.

Key data: 3000 mm

CNC gantry machining center AWEA SP3016 with Fanuc control. Table load 10000 kg very good condition immediately free. Dismantling and loading of suitable trucks can be carried out cost-effectively. Installation and commissioning on request.

No. 3087: 1 gebr. 5-axis milling machine Fabr. BOHNER & KÃ?HLE, VH 2 type / 10 K with control Fidia V 7.2 arb.-ber.: 1500 x 1500 (1000) x 975 mm Power: 14 kW Accessories: Table 2500 x 1000 mm 16 x tool changer Cup other: Spindle retainer for SK 50 Spindle speeds 40-5600 min-1 RADIUS Milling spindle 1030 mm Weight 12500 kg

BROTHER Machining Center Model TC-229 N (comparable to FANUC, MÜGA) YOC 06.1998 Condition: exceptionally good High-speed vertical machining center for Drilling-threading and light milling Table dimensions: 600 x 300 mm Longitudinal travel: 480 mm Transverse travel: 360 mm Vertical travel: 270 mm Spindle speed: 10 – 10,000 rpm. Spindle cone: BT 30 Tool changer: 14-fold Tool change time: 1.2 sec. Feeds: 30 m/min. Spindle power: 9.5 kW Weight: 1800 kg Control: BROTHER CNC-620 Accessories: coolant device; electr. Handwheel; Legs; 4-jaw chuck as assembled Price net plus VAT ex location plus loading costs of 1000€

Ferrari S620 Cb Milling Machine :::SPECIFICATIONS::: CNC Model: Selca - CNC Version: 4045 - Head Type: Tilting Vertical Head - Additional Technical Notes for Head: C Axis +- 91° Tool holder: iso 45 - Spindle power: 24Kw - Spindle speed: 16000 - Number of tools: 24 - X axis stroke: 2000mm Y-axis travel: 880mm Z-axis stroke: 1100mm Table size: 650 x 1400mm High refrigerant pressure: yes Equipment: Renishaw touch probe :::D DIMENSIONS AND WEIGHT::: Length: 6100mm Width: 2750mm Height: 3350mm Weight: 16000Kg

CHIRON FZ 18 W MAGNUM HIGH SPEED CNC milling machine was built in 1998 in Germany. The machine, equipped with an intuitive SIEMENS SINUMERIK 810M CNC controller, a powerful high-speed spindle and a 20-position tool head, is used in precision machining of steel and aluminium. The top-quality construction additionally ensures long, trouble-free operation and high stability under even the heaviest loads. This is why the CHIRON FZ 18 WM CNC milling center is the best choice for any industrial facility. The total weight of the machine is 5500 kg. Technical data of the CHIRON FZ 18 W MAGNUM HIGH SPEED CNC machining center - CNC control: SIEMENS SINUMERIK 810M - feed rates in the X/Y/Z axis: 750/400/600 mm - work table dimensions (L x W): 1240 x 850 mm - maximum spindle speed: 10500 rpm - spindle taper: SK40 - 20-position tool head - machining accuracy (spacing): 0.01 mm - machining  ...

CNC Manufacturing Center Mill 2000 Commissioning 2007 4 - 5 axis machine Siemens 840 D Commuting X axis 2000 mm y axis 500 mm Z axis 550 mm 40 tool slots Rigid table with chip tray Clamping surface 2600 mm 550 mm with 3 T-slots High-speed package Rapid traverses 60 m/min Speed 20 - 12,000 rpm Coolant pump 30 bar 900 liters 2 extraction units as air purifiers Automatic grease lubrication 2x Rinsing gun Single-shift operation Spindle has been renewed and much more. The machine can be viewed under power

CINCINNATI ARROW 2 1000 CNC WITH LOW HOURS WE OFFER AN NICE CONDITION VERTICAL MACHINING CENTRE YEAR 2003 WITH EQUIPMENT CONTROLS: GE-FANUC SERIES 18I-M CONTROL Table: 1,120 x 610mm TRAVELS: X : 1,020mm, Y : 510mm, Z: 560mm. Rapid Traverse : XYZ=24m/min. Maximum Cutting Feed : 15m/min. Maximum Spindle Speed: 8,000rpm. Spindle Taper BT40. 20 Position ATC. MACHINE WILL BE AWAILIBLE FROM BEGINING FEBRUARY 2024

Vertical machining center Cincinnati Millacron Traverse path x 1270 mm Y: travel 660 mm Z: travel 660 mm CNC control: Acramatic 850SX Table size: 1,370 x 660 mm Table load: 910 kg Rapid traverse x/Y/Z: 15,000 mm / min. Spindle speeds: 60-8,000 rpm. Spindle recording: ISO 40 Distance from spindle - table min/max: 150/880 mm Tool changers: 21 items Equipped with:-cooling device -Hand Council operation -Complete instructions Country of origin: England Spindle motor: 9 kW Machine weight: 8.000 kg Machine WxDxH: 3,600 x 2.900 x 3.000 mm

Control NCT ... 104 Clamping table surface ... 3100x1000mm Axis X ... 3000mm Axis Y ... 1200mm Axis Z ... 1000mm Spindle speed ... 0-4000 rpm The machine is in good condition, possible to test under electricity.

CNC milling machine ZX7124F table 900x230mm new/unused Description Was intended for a project, but was never used. Private sale without warranty. Pick-up only Table size 900 mm×230 mm T slot number spacing 3×14 mm The biggest hole diameter Ф20 mm End mill diameter Ф20 mm Spindle allowed maximum 150N.m Spindle speed 20~6000rpm The spindle taper BT30 The spindle end face to the 80~480 mm Spindle center distance to 300 mm The motor power 2.2KW Moving range (X, Y, Z) 500×280×400(mm) 12 Fast moving speed (X, Y, Z) 6000×6000×6000(m/min) Repeat positioning accuracy ±0.02 mm The feed motor power (X, Y, 4×4×7(N.m) Cooling pump motor power 0.09KW The power supply voltage 380V、50HZ The weight of the 1400 kg The environmental 0°C ~45°C

Year of construction 2001 Siemens 810D Operating hours 1988 Travel distances 350 x 240 x 340 Spindle speed 20 - 6300 Drive power 6.3/10 KW Total connection power 15 kW Tool holder SK40 Accessories: el. Handwheel Spühlpistole Universal swivel rotary table 400 x 280 mm, Rotation range 360 °, swivel range +105/-15 ° with electronic angle display Coolant device

No. 4304: 1 gebr. Universal tool milling machine Fabr. COVER, type FP 3 CC Bu. 1990 with Sinumerik 880 ARB.-ber.: 400 x 400 x 500 mm, power: 6 kW Accessories: rigid table full cab Electronic Handwheel Documentation other: spindle retainer for SK 40 / DIN 2080 Speed range up to 6300 min-1 Rapid traverse 10 m / min Space ca Weight approx. 3 to

Table size: 460 x 800 mm stroke x: 485 mm traverse path y: 385 mm traverse path z: 380 mm Quill stroke: by hand approximately 70 mm spindle speeds: 50-3150 rpm stufenl feeds. adjustable: 2-1000 mm / min rapid traverse rate: 2 m / min. Port: 3.7/4,4 kW space: 2100 x 1650 x 1730 mm weight: 1850 kg

NC milling machine, 3 axis, brand cover, type FP 5NC, YOC 1986 Documents are available. The price is net. Without vice and rotary jaw chuck

- X: 300 mm - Y: 160 mm - Z: 340 mm - Speed range: 40 - 2000 rpm - Clamping surface: 600 x 210 mm - Spindle mount: SK 40 - Control: TNC 113 digital display - Total power: 1.5 / 1.9 kW - Machine weight: 1050 kg - Space requirements (W x D x H): 1.2 x 1.0 x 1.9 m - Condition: good Details rigid angle table, infinitely variable feed in three axes, rapid traverse in three axes, spindle brake, vertical milling head can be moved to spindle block 100 mm Accessories Machine feet, documentation, counter holder, no other accessories

Cover FP2 FP 2A SK40 / with dialog 11 path control Control: CNC Dialog 11 - 3D Web Control Speed: 40 - 4000 rpm Feed rate: 2 - 3600 mm/min infinitely variable Rapid speed: 4 m/min Drive power: 1.6 / 2.0 kW 1400/2800 rpm Quill: Extendable quill vertical 80 mm SK40 with Clamping system DIN 2080 Travel: X/Y/Z: 300/300/400 mm Rotary table: 3 axis Universal table 600 x 330 mm max load 250 kg Equipment: Hydromechanical clamping system SK40 with suit bolt DIN 2080. Vertical & Horizontal spindle , Milling head manually swivel+/- 90 ° Machine light Programming: Dialog-guided programming with cycles. E-handwheel.

Condition: used very good, ready for immediate use Specifications: – Control: DIALOG 4 – Travel approx.: X: 300 mm, Y: 300 mm, Z: 400 mm – Table dimensions approx.: 620 x 390 mm – Tool holder: SK 40 – Weight approx. 1,600 kg – Transport mass approx.: L: 1.90 m, W: 1.50, H: 1.90 m -Accessories, documentation, vice and approx. 20 A SK40 mounts

Lid milling machine FP4MA-2204 Year of construction: 1987 Serial no.: 20965 Controls: Contour 2 Condition: fully functional

DECKEL FP4 NC Fraesmaschine Dialog 4 Dialog 4 control, working range 560 x 500 x 450 mm, pinole stroke 80 mm, 18 spindle speeds 31.5 -6300 min, folding head, tool holder SK 40, feed speed 1-4000 mm/min, rapid traw 6000 mm/min, table load 800 kg, weight 2070 kg, total connection value 16 kVA.

For sale is our DECKEL FP4NC with universal table Year of construction: 1985 Control Dialog 4 x-travel 485 mm y-travel 385 mm z-travel 380 mm Spindle holder SK 40 Spindle speeds 0 - 3150 rpm Table size 800 x 460 mm Feed rate 10 - 2000 mm/min Machine is connected and can be tested on site. Price VB 5.000 EUR net plus 19% VAT We also have vices that are sold separately Also, some SK40 tools.

Specifications: Tool holder: SK 40 Travel X/Y/Z: 500 / 400 / 400 mm Speed range, infinitely variable: 20 - 450 min-1 Feeds: 0- 5000 mm/min Clamping area: 700 x 500 mm Engine power: 17 kVA Connection: 400 V, 32 A Table swivel: 360° Weight, approx.: 3000 kg Dimensions (WxDxH), approx.: 2630 x 1700 x 2150 mm Equipment: - Control: TNC 124 Heidenhain - Infinitely variable speed control - Mechanical desktop clamping - Rapid traverse - Spray gun for spill flushing - 3 electronic handwheels (X,Y,Z) - 7 tightening bolts - Emergency stop push button - Eletr. Angle display for swivel rotary table, angle measurement in B-u. C-axis - Coolant device incl. pump -CE

MAHO Lid CNC MH 600E Metal milling machine with rotary table 500mm MAHO – Deckel MH 600 E CNC Metal - Milling Machine X = horizontal longitudinal axis travel 600 mm Y = vertical axis 400 mm Z = horizontal travel 400 mm B= NC rotary table d= 500 mm 7 T grooves 14 H 7 Spindle holder ISO 40 Quill spindle stroke 80 mm Spindle speeds 80 - 4000 rpm Gear stages 18 Feed range 0.1 - 2000 mm/min Rapid traverse: x = 4 / y = 3 / z = 5 m/min Table load workpiece and clamping device 300kg Spindle motor 4 kW 400V 50 HZ Total power requirement 16 kVA YOC 1988 With coolant device Machine weight ca. 2,6 t Weight: 2500 kg with path control CNC 432 E Handwheel splash guard booth, Switch-on hours: 29004 G&-5018-M3OWI Accessories: Kohn Spann - Vice with stop 130x 180mm G&-5019-M3OWI

Deckel, Studer, SAMECA Item 1 CNC 3 axis milling machine Brand: Lid Type: FP 5NC Year of construction: 1986 Condition: Functional Without vice and 3 jaw chucks. Item 2 CNC cylindrical grinding machine Brand: Studer Type: S40-4 Year of construction: 1987 Condition: Functional Item 3 Designation: Bar feeder Manufacturer: SAMECA Type: Quick Sam 45 Year of construction 1996 Condition: used, functional

x-travel: 600 mmy-travel: 525 mmz-travel: 500 mmtable surface area: 1000 x 543 mmspindle taper: SK 40 spindle taper: DIN 69871 spindle turning speed - stepless: 20 - 12.000 U/minfeed X/Y/Z-axis: 20 - 10.000 mm/minrapid traverse X/Y/Z axis: 18 / 18 / 15 m/mintable load: max. 350 kgcontrol: HEIDENHAIN MillPlus milling-head swivable +/-: 90 °total power requirement: 26 kVAweight of the machine ca.: 4,2 tdimensions of machine L x W x H: 2,95 x 2,1 x 2,26 mAccessories: various tool fixtures, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

X-axis: 2500 mm Y-axis: 920 mm Z-axis: 820 mm Work table: 3100 x 900 mm Spindle Exception: SK/ISO40 Spindle speeds: 20 - 18,000 rpm. Tool changer: 30 pcs. Control: Heidenhain iTNC 530 Equipped with: -Conveyor - Cooling by spindle 40 bar - ISO40 tools -Operating instructions Country of origin: Germany Motor power: 35 KW Machine LxWxH: 6000 x 3800 x 2950 mm (transport dimensions) Machine weight: 25.000 kg

Deckel Maho Universal Machining Center CNC DMU 70 VL Deckel Maho Manufacturer [manufacturer]: Deckel Maho (DMG) Typ [ type]: DMU 70 VL [control unit]: Heidenhain TNC 430C Jahr [construction year]: 2002 Travel range [travel path]: X= 710mm Y=520mm Z=520mm spindle rotation speed: 20-18,000 rpm Main spindle power: 36 kW IKZ internal coolant supply Tool changer: 2 x 32 places Tool holder: SK 40 to DIN2080 Cooling system: Knoll Chip conveyor: 2 units/units Weight [weight]: 12.800kg Dimensions [needed space]approx. (L x W x H): 5.3m x 2.75m x 2.75m Technical documentation/documents available in detail

Manufacturer: Gildemeister Type: Twin 65 with counter spindle & automation. Year of construction: 2010 Control: Siemens 840D powerline Circulation diameter above bed: 250 mm Flat travel carriage 1: 300 mm Longitudinal travel carriage 1: 650 mm Perpendicular Y-axis: ± 40 Flat travel slide 2: 180mm Longitudinal carriage 2: 650mm Rod passage max: ø 65 Drive power:40/100% 25/37 KW Speed range from – to: 20-5000 rpm Weight approx.: 10.000 kg Equipment: 2x star turret: 12x Driven tools: 12x VDI 40 2 turrets (all stations driven) Tool carrier: 12x VDI 40 2 turrets (all stations driven) Tailstock: Yes + counter spindle MK 4 Quill mounting: Yes Chip Conveyor: Yes Accessories: -Y-axis. -Coolant tank: 980l / 80 bar. -Coolant device for lower turret 8/20/80 bar. -Belt filter system -Mechanical oil mist separators 600m³ wit ...

Parcels of 7 machines 1x CNC 5 axis milling center, brand Okuma, type MU 400 VA, built in 2004, with various accessories and tool holders 1x CNC 5 axis milling center, brand DMG, type DMU 50/60, year of construction, 1996 with various accessories and tool holders 1x CNC 3 axis milling center, brand Okuma, type VR 40II, year of construction, 1995 with various accessories and tool holders 1x CNC 4 axis milling center, brand Okuma, type MC 40VA, built in 1991, with various accessories and tool holders 1x tool adjuster, Make EZSET Type 400 1 x Schumpfgerät, Brand Heimer, Type Power Clamp, Year of construction 2019

DOOSAN DNM 4500 CNC milling machine built in Germany in 2019 is used for drilling, milling or threading workpieces weighing up to 600 kg. Machining is performed in the X,Y,Z axes on a working table with dimensions (L x W) of 1000 x 450 mm. The vertical machining centre characterised by excellent precision and exceptional machining quality, will satisfy even the most demanding customers. Noise and vibrations occurring during machining are reduced thanks to the use of a high-performance direct drive spindle operating at speeds in the range from 80 to 8000 revolutions per minute. The tool magazine can store up to 30 tools, and they are changed in a very short time of just 1.2 seconds. The machining centre is also equipped with among others, through-spindle coolant, a lubrication system and an extremely efficient and reliable FANUC 0iMF CNC controller, ensuring full control of the mill ...

Vertical copying and milling machine Make: Droop & Rein Type: FSM 1255 DA 30 kf Year of construction: 1990 Commissioned: 1992 Control: Fidia CNC 11 Spindle Ø: 130 mm Spindle speeds: 80 – 3150 rpm Max. milling power: 30 kW Spindle bore: SK 50 Quill stroke: 200 mm Swivel: + / - 45° Travel: X-2400 mm Y: 1250 mm Z-1000 mm Feed range: 5 – 3000 mm/min Rapid traverse: 6 m/min Clamping surface: 3000 x 1250 mm Max. table load: 10 to Total power requirement:55 kW Space requirements: approx. 8500 x 5500 x 4500 mm Weight: approx. 47 tons

Vertical machining center, very good condition, electrified to visit, with many accessories Control : Sinumerik 810D with Shopmill, Procedure: X-420mm, Y-330, Z-240, Table: 850x325mm Spindle: SK40, 0 - 5000 rpm, 100Nm Feed rate: up to 12000 mm/min ATC : 12 Pos. Dimensions: 230 x 240 x 245 cm , Weight : 2900kg incl. : 2 machine vices, 30 holders, 3D probe, tool cabinet with clamping tools, milling cutter,

- X: 420 mm - Y: 330 mm - Z: 400 mm - Table size: 850 x 325 mm - Speed range: 0 - 5000 rpm - Spindle mount: SK 40 - Rapid traverse: 12 m/min - WZ changer: 12-speed - Tool holder: 40 SK - Tool weight max.: 5 kg - Tool length max.: 220 mm - Tool Ø max.: 63 mm - Control: Sinumerik 810 M - Switch-on hours: 40484 h - Total power: 15 kW - Machine weight: 3200 kg - Dimensions (W x D x H): 2.4 x 2.3 x 2.45 m - Condition: good, ready for immediate use Details one tool station is currently defective, nice compact machine, can be used immediately Accessories HILMA SM 125 machine vice, various recordings in the magazine, documentation, machine feet

Type: Milling Machine/Machining Center Ident Number: 22592 Category: Milling Machines Manufacturer: Exeron Model: HSC 500 Year of construction: 2016 Travel: 620 x 570 x 350 mm [ X x Y x Z ] HSC Machine Number of axles: 3 Spindle mount: HKS 40-E Spindle speed: 42000 rpm max. workpiece weight: 350 kg ITNC 530 Software 30-speed WZ changer Spindle HSK40 Blumlaser Tool Measurement Renishaw Probes Aspirator Oil mist extraction Minimum quantity lubrication

travel -x axis: 705 mmtravel -y axis: 425 mmtravel -z axis: 610 mmcontrol: Heidenhain - iTNC 530 turning speed range: 50 - 20.000 U/minnumbers of positions in the tool changer: 32 tool taper: SK30 Universal Milling Machine | FEHLMANN - Picomax 90-M Scope of delivery:- extensive package of tools- swivel rotary table (4th + 5th axis)The machine is in a well-maintained condition.Please refer to the offer for further technical details.A machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: PICOMAX90M | PICOMAX90 M | PICOMAX-90 MThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC Boring and milling machine FPT SPAZIO 20 - 2000x800x1250 mm, CNC SELCA 3045PD, Information about technical data are not binding., Machine available subject to prior sale., Working table size: 2200X750 mm, Longitudinal travel x axis: 2000 mm, Cross travel y axis: 800 mm, Vertical travel z axis: 1250 mm, Working feed x-y-z axes: 0 - 15.000 mm/1, Rapid feed x-y-z axes: 15.000 mm/1, Spindle taper: 50 DIN 69871, Spindle speed: 0 - 4000 giri/1, Spindle motor power: 21 Kw(S1) - 25 Kw(S6), Cnc: SELCA 3045PD, Accessories: Automatic index head 2,5°, chip conveyor

Control : Micro-Haas VF2 X-1250mm, Y-508, Z-600, Spindle : SK40 , 10 - 7500 rpm , Feed rate : 0 - 4500mm/min, rapid traverse : 15m/min Table load : 1000kg Weight : 6to, L- 370cm, W330cm, H-290cm, No shift work !

We hereby sell our Hermle UWF 1001 H milling machine. Please refer to the pictures for technical data. If you have any questions, just give us a call. Thank you very much.

x-travel: 400 mmy-travel: 330 mmz-travel: 350 mmtotal power requirement: 6,3 kWweight of the machine ca.: 2 tdimensions of the machine ca.: 736 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-400,y-330,z-350,angle table 630x335,SK 40, 40-6,000 rpm,measuring probe

X: 500 mm Y: 360 mm Z: 400 mm Speed range: 40-2000 RPM Spindle retainer: SK 40 DIN2079 Control: HEIDENHAIN TNC 155 Total power: 6 kW Machine weight: 2000 kg Dimensions (W x D x H): 2.8 x 2.9 x 1.9 m Condition: good, ready to use

No. 3999: 1 used Universal tool milling machine Make HERMLE, type UWF 801, 1988 with Heidenhain TNC 135 Working range: 500 x 430 x 400 mm, drive power: 3 kW Accessories: Rigid Table 800 x 390 mm Chip tray Documentation Other: Spindle SK 40 Speed range 50 - 2500 min-1 Space requirement approx. 3 x 3 x 2 m Weight approx. 1400 kg

x-travel: 600 mmy-travel: 400 mmz-travel: 420 mmControl: Heidenhain Tnc table-size: 900 x 460 mmturning speeds: 4000 U/mintotal power requirement: kWweight of the machine ca.: 2,9 tdimensions of the machine ca.: 3 x 2 x 2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC - TOOL MILLING MACHINE HERMLE UWF 902-S Control : Heidenhain 426 Travel X - axis approx. 600mm Travel Y - axis approx. 450mm Travel Z - axis approx. 500mm Speed range approx. 20 - 6300 rpm Tool holder : SK 40 Feed range approx. 1 - 10000mm/MIN Verikal /horizontal milling device Coolant device Drill quill Machine housing Soqllvbn Angle table Documentation Dimensions: L x W x H approx. 4000x2800x2400mm Weight approx. 4000kg

No. 2179: 1 used Universal tool milling machine MAKE HERMLE, type UWF-801, built 1980 with Heidenhain TNC-124 track control Working range: 500 x 430 x 400 mm, drive power: 3 kW Accessories: Rigid table 800 x 350 mm, Chip tray, automatic tool clamping, Coolant device, operating instructions, electronic handwheel in the control panel Other: Spindle ISO-40, Speed range 45-2000 rpm, Feed range 4-1600 (1000) mm/min, Rapid speed 1.6 (1) m/min. Space requirement approx. 2.3 x 2.3 x 1.8 m, Weight approx. 1100 kg.

DATA ON THE MACHINE Machine type: CNC milling machine Manufacturer: HERMLE Model: UWF1001H Built: 1991 Condition: used Location Warstein , Germany Reference M-HER-0221 Description We offer you a used CNC milling machine from manufacturer Hermle. Control Heidenhain TNC 407/415 Monitor new x-path 700 mm y-path 550 mm z-way 500 mm Table clamping area 650 x 395 mm Spindle speeds - infinitely 20- 4200 rpm Spindle holder ISO 40 DIN 2079 Pinole stroke vertical 95 mm Drive spindle motor 12 kw Machine weight approx. 3.8 t Space requirements approx. 5 x 4.6 x 2.5 m Electrics 400 Volt Coolant device Fixed angle table 1000 x 490 mm Vertical milling head swivel. +/- Full-protection cabin Separate control cabinet (absolutely clean and uncrafted) electronic handwheel Our offer is aimed at professionals who are covered in accordance with the Trade Code in accor ...