torni usati in vendita (3,106)

turning diameter: 250 mmturning length: 100 mmcontrol: SIEMENS 840 D total power requirement: 35 kWweight of the machine ca.: 7500 kgdimensions of the machine ca.: mE M A G (Germany)Vertical CNC Controlled Hard Turning and Grinding machinewith tool turret and workpiece handling SystemModel VSC 250 DS Year 2004 # M7 28.69324_______________________________________________________Turning Ø, max. 250 mmTurning length internal / external 100 mmWorkpiece length min./max. 29 – 100 mm6-positon tool turret Ø / swing-Ø 480/790 mmWorkpiece spindle Slide travel, X / Z / stroke 680 / 400 / 200 mmFeed rate / Quick feed X/Z 45/30 m/min.Feed force X/Z  ...

turning diameter: 400 mmturning length: 915 mmcontrol: NUM Type 1062 T total power requirement: 12,5 kWweight of the machine ca.: 5500 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 300 mmturning length: 710 mmcontrol: SIEMENS SINUMERIC 840 total power requirement: 40 kWweight of the machine ca.: 6000 kgdimensions of the machine ca.: mI N D E X (Germany) CNC Controlled Slant-Bed Chuck Lathe with Turret and Tailstockand INDEX CNC Control C 200 – 4 (SIEMENS)Model G 300 Year 1995 S/N 5000 65_____________________________________________________________Turning - Ø, with chuck, max. 300 mmSpindle bore 90 mmMax. Workpiece Swing dia. 400 / 590 mm Turning length / travel of turning slide, (X-Achse) max. 710 mmTurret head slide cross movement (Z-Axis) max. 140 mmTurret with 12 tool holder positions DIN 30 mmFeed range of turret slide /  ...

turning diameter: 200 mmturning length: 400 mmcontrol: SIEMENS SINUMERIC 840 C total power requirement: 40 kWweight of the machine ca.: 6.500 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 250 mmturning diameter over slide rest: 140 mmturning length: 550 mmturning speeds: 125 - 2000 U/mincentre height: 125 mmspindle bore: 26 mmtailstock quill taper MT: 2 MKtailstock quill stroke: 65 mmconnected load frequency: 230 Vtotal power requirement: 0,75 kWweight of the machine ca.: 0,135 tdimensions of the machine ca.: 1,25 x 0,6 x 0,6 mSpeed in 6 levels 125 - 2000rpm.3-jaw chuck 125 mm.4-jaw chuck 125 mm. (Independent)Fixed bezel.Revolving bezel.4-fold steel holder.chip tray.back panel.spindle protection.Hardened bed rails.Longitudinal feed with left / right switching.Set of change gears.Associated Tools.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 320 mmturning diameter over slide rest: 200 mmturning length: 900 mmturning diameter in the gap: 320 mmturning speeds: 75 - 2000 U/mincentre height: 160 mmspindle bore: 38 mmtailstock quill taper MT: 3 connected load frequency: 400 Vtotal power requirement: 1,5 kWweight of the machine ca.: 0,4 tdimensions of the machine ca.: 1,6 x 0,75 x 1,7 mSINO digital display3-jaw chuck 200 mm.4-jaw chuck 200 mm.Faceplate 250mmbezel fixedQuick-change steel holder with 4 pcs. steel holdermachine lightChip tray, chip protection wallHardened and ground bed trackslining protectionmachine tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diametro di tornitura: 60 mmlunghezza di tornitura: 200 mmnumero di slitte: potenza totale richiesta: 20 kWpeso della macchina ca.: tdimensioni della macchina ca.: m

turning diameter: 1250 mmswing diameter: 1160 mmturning height: 800 mmfaceplate diameter: 1000 mmtotal power requirement: 97 kWweight of the machine ca.: 25000 tdimensions of the machine ca.: mP I T T L E R (Germany)CNC Controlled Vertical Turning and Milling CentreWith Tool Changer and Pallet ChangerModel PV 1250 / 1-1 Year 1994 _______________________________________________________Turning Ø max. 1,000 mmSwing Ø max. 1,160 mmTurning length 800 mmX Axis - horizontal 1,300 mmY Axis - vertical 800 mmFeed / quick feed 16,000 mm/minMain spindle speeds 10 - 1,000 rpm !Main spindle speeds via separate C Axis 0.1 - 16 rpmPositioning accuracy of C Axis 360° + / - 5 Tool holder ISO 50Tool drive 22 kWMax. torque / spindle speed 315 Nm / 2,500 rpmPallet size 630 x 630 mmSpindle drive  ...

swing diameter: 640 mmmax. turning passage: 640 mmcontrol: Simens 840 D Powerline - - - - - Main spindle - - - - -: - - - - - -bar material dia.: 65 mmchuck diameter: 200 - 315 mmspindle bore diameter: 80 mmdiam. of main spindle in forward position: 120 mm--- Subspindle ---: - - - - - -bar material dia.: 65 mmchuck diameter: 315 mmspindle bore diameter: 80 mmforward bearing diameter: 120 mm- - - - - General data - - - - -: - - - - - -spindle distance: 1.500 mmturning length: 1.185 mmMain-/Counter -spindle turning speeds: 5.000 U/mindriven tools turning speeds: 12.000 U/minSlide cross: X1, Y1: 550 / 180 mmSlide cross: Z1: 1.185 mmSlide cross: B1: 240 °Slide cross: X2: 180 mmSlide cross: Z2: 1.050 mmSlide cross: Z3: 1.150 mmCNC Turning- and Milling Center | DMG GILDEMEISTER - GMX 250 linear equipped with main/counter spindle, chip conveyor, tool changer, a turret for driven tools and and  ...

diametro di rotazione: 530 mm0: 620 mmLarghezza ruota: 20 mmdiametro rotolo: 45 mmpotenza totale richiesta: ohne kWpeso: 250 kgdimensioni della macchina ca.: 1,2 x 0,30 x 1,3 m

turning diameter over bed: 250 mmturning diameter over slide rest: . mmcentre distance: ca. 400 mmcentre height: ca. 125 mmturning speed range: 80 - 3000 U/minnumber of speeds: 18 spindle bore: 24 mmtailstock quill taper MT: 3 weight: ca. 400 kgdimensions: ca. 1200 x 650 x 1300 mm4-jaw-chuck diameter: 125 mmincluding Röhm four-jaw chuck, Ø 125 mm incl. drilling and turning jaws,collet chuck device incl. collets 1-20 mm (exept 5 and 10 mm) with 1 mm gradientMultifix size A with 3 interchangeable holders,chuck protection with shutdownThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Indicazioni: Produttore: Spinner Tipo: SB-CNC Anno di fabbricazione: 1998 Controllo: Siemens 840D Corsa: X 250 mm Z 285 mm Ore di accensione: 32.156 h Mandrino principale: Velocità di rotazione: 5.000 rpm Passaggio mandrino: 42 mm Portautensili: Portautensili: Multifix A su trave lineare Dimensioni e peso Dimensioni: 2.100 mm x 800 mm x 1.600 mm Peso: circa 1.500 kg Condizione Condizione: Usato Funzionale: testato e perfettamente funzionante Altre attrezzature e accessori inclusi: Mandrino a pinza Interfaccia per caricatori di barre La macchina ha un'elevazione della paletta di 10 mm.

: 350 mm: 0650 mm: : 175 mm: 42 mm: 315 mm: 3500 U/min : D1-4 DIN 55029 : 63 mm: 140 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 65 mm

Centro di tornitura e fresatura CNC Tornio CNC usato Tornio universale CNC Produttore: Traub Tipo: TNA 300 Anno di fabbricazione: 1996 Mandrino ø 65mm Contropunta Utensili motorizzati Trasportatore Controllo TX8H FlexIPS Mandrino portapinze con pinze da 5mm a 65mm Mandrino a tre griffe Vari portautensili fissi, rotanti e angolari And so on... incl. caricatore per il caricamento di barre Traub DNH 61 3000, anno di costruzione 1996 incl. molti accessori! Luogo della macchina: Nahe 93047 Regensburg La macchina può essere visionata in loco. È ancora energizzato e funziona perfettamente. Ci piacerebbe avere tue notizie.

Tornio CNC Okuma Genos L200E-M con portale Controllo: OSP-200LA-R Anno di costruzione: 10/2012 lunghezza massima di tornitura 380 mm Diametro di tornitura 200 mm Diametro di tornitura sul letto 450 mm Velocità di rotazione: 107 - 4.500 rpm Passaggio mandrino: 66 mm Torretta: M-V12 (VDI) Velocità utensili: 50 - 6.000 giri/min Corsa rapida m/min: X: 20 / Z: 25 Accessori/Attrezzature - Dimensioni del pezzo del caricatore a portale tipo ATPGR-03 Ø 20 - 150 mm, peso del pezzo max. 2 x 3 kg (Doppia pinza) per OKUMA Genos L200E-M -Trasportatore - Setter di tocco - Contropunta idraulica -Pompa del liquido di raffreddamento - Pacchetto di strumenti

6 mandrini Maschiatura Foratura trasversale Rulli filettati Apparecchi di fresatura un sacco di accessori Motore di avanzamento (mandrini) difettoso! con caricatore di barre IEMCA PRA 40/32 P

Offerta 24177 Indicazioni: - Altezza punta 180 mm - Larghezza punte 1000 mm - Ampia circolazione – sopra il letto 355 mm - tramite slitte piatte ca. 200 millimetri - Foro mandrino 36 mm - Cono di raccolta del cannotto della contropunta MK 5 - Corsa del cannotto della contropunta: 260 mm - Velocità del mandrino 18 - 1800 giri/min -Feed - Corsa della slitta trasversale ca. 200 millimetri - Corsa della slitta superiore ca. 115 millimetri - Azionamento 400 V / 5,8 kW - con: - Contropunta, fodera a 3 griffe, lunetta - Supporto in acciaio, punzone centrale mobile, - Vassoio per trucioli - Ingombro ca. L 2500 x A 1500 x P 1200 mm - Peso ca. 2100 kg

max. Spindle speed: 5000 U/min.travel -x axis: 160 mmtravel -z axis: 450 mmnumbers of turret head positions: 12 tool taper: VDI 30 Control: Heidenhain iT Plus Dimensions (L x W x H): 4,5 x 2,5 x 2,5 mweight of the machine: 3700 kgCNC Turning- and Milling Center | DMG GILDEMEISTER - CTX 310Additional equipment:- C-AxisThe machine is in good condition.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: CTX310 | CTX-310The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Altezza punta: 205 mm Larghezza centrale: 1500 mm Ø circonferenziale: sopra il letto 410 mm Foro del mandrino: 47 mm Portamandrino: misura 6 Contropunta del cono di raccolta: 4 MK Velocità del mandrino: 28 - 1250 giri/min Avanzamenti: longitudinale/piatto 0,03-1,3/0,008-0,33 mm/giro Passo della filettatura: 0,25 - 76 mm Collegamento elettrico: 380 V, 3 kW Ingombro: 2800 x 1100 x 1600 mm Peso: 1330 kg

Altezza della punta: 250 mm Larghezza del centro: 2000 mm Ø circonferenziale: sopra il letto 500 mm Foro del mandrino: 50,8 mm Portamandrino: misura 6 Contropunta del cono di raccolta: 5 MK Velocità del mandrino: 22 - 2000 giri/min Avanzamenti: longitudinale/piatto 0,05-6,4/0,025-3,2 mm/giro Passo della filettatura: 80 - 1 mm Collegamento elettrico: 380 V, 5,5 kW Ingombro: 3600 x 1100 x 1500 mm Peso: 1875 kg

faceplate diameter: 1800 mmswing diameter: 2000 mmturning height: 1500 mmControl: SIEMENS 840 D workpiece weight max.: 5000 kgram head dimension: 250 x 250 mmtable turning speeds: 1 - 320 U/minpower capacity - table: 100 kWTorque: 31784 Nm0: 218 kwweight of the machine ca.: 55 tDimensions:- Turning diameter on the faceplate 2000 mm- Faceplate diameter 1800 mm- Turning height with turning head L100 1500 mmPower on the ram:- Clamping force of tool holder or accessories 120,000 N- Max. Feed force Z and X axis 30,000 N- Drive power of the milling, drilling and grinding spindle 37 kW- Speeds for turning 10 - 3000 rpmTravels:- Axis X, horizontal support on the crossbeam -2270/+2275 mm- Axis Z, vertical support on crossbeam 1250 mm- Axis C, table rotation 360°Feed speeds:- Axis X 15,000 mm/min- Axis Z 15,000 mm/min- Axis C 3.25 rpmCoolant system:- Coolant ...

faceplate diameter: 3200 mmswing diameter: 5100 mmturning height: 2505 mmcross rail - adjustment: 1500 mmmax. ram stroke: 1250 mmslide adjustment: 2000 mmcontrol: Siemens 8 T tool changer: 16 STK table load: 60 tfaceplate turning speed range -stepless-: 0,8-100 U/minfeed: 0,0 1-1000 mm/minrapid traverse: 6000 mm/mindrive of main spindle: 75 kWweight of the machine ca.: 70 tdimensions of the machine ca.: 9,3 x 6,1 x 6,0 mmachine is in an excellent conditionwith div. acessories (photos available)machine can be equipped with latest electrics and Siemens CNC control SINUMERIK 840D sl for additional costs.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0360 mm: 215 mm: 1000 mm: 180 mm: 45 mm: 3,75 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0350 mm: 196 mm: 0650 mm: 170 mm: 42 mm: 7,5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0360 mm: 215 mm: 1000 mm: 180 mm: 45 mm: 2,25/3,25 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0460 mm: 1500 mm: : 230 mm: 78 mm: 400 mm: 2200 U/min : D1-8 DIN 55029 : 95 mm: 145 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0330 mm: 210 mm: 0635 mm: 167 mm: 40 mm: 2,2 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0390 mm: 240 mm: 1000 mm: 190 mm: 54 mm: 5,5 kW

: 0400 mm: 1250 mm: : 200 mm: 55 mm: 315 mm: 2700 U/min : D1-6 DIN 55029 : 73 mm: 140 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 250 mmturning diameter over slide rest: 145 mmturning length: 550 mmturning speeds: 50 - 2000 U/mincentre height: 125 mmspindle bore: 26 mmtailstock quill taper MT: 2 MKconnected load frequency: 230 Vtotal power requirement: 0,75 kWweight of the machine ca.: 0,12 tdimensions of the machine ca.: 1,3 x 0,65 x 0,6 mlongitudinal feed.3-jaw chuck 125 mm.4-way steel holder.chip tray, bulkheadHardened bed tracks.Emergency stop switch.lining protectionTool box, instruction manual.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.