presse usati in vendita (1,784)

Massimo. diametro dello spazio vuoto iniziale: 30 mm Lunghezza vuota: -Min.: 120 mm -Max.: 300 mm Massimo. diametro della flangia sconvolta: 60 mm Sconvolgente slittano forza nominale: 2500 kN Massimo. forza sul scivolo di serraggio con date chiuse: 2500 kN infarto: -Dado mobile: 100 mm -Sconvolgimento (pieno): 220 mm -Chiusura del dado: 140 mm Tratti di scorrimento al minuto: 45 Dimensioni complessive della macchina: -Lunghezza: 6050 mm -Larghezza: 4600 mm -Altezza: 2260 mm Peso della macchina: 24680 kg

Capacità, tonnellata: 800 Corsa, mm: 320 Ictus/min: 20 Altezza di chiusura, mm: 900 Corsa di regolazione da letto a ram, mm: 320 Dimensioni del letto, mm: 2500x1600 Potenza del motore a trazione principale, kW: 75 Dimensioni complessive, mm: 4220x3500x8356 Peso, tonnellata: 96,6

(tavolo mobile laterale anteriore) Forza nominale: 1000 tonnellate Tratto di scorrimento: 400 mm Tratti di scorrimento continui per 1 min: 20 Singolo tratti diapositiva per 1 min: 16 Altezza di chiusura: 1060 mm Regolazione del faro: 320 mm Dimensioni del tavolo: 3150x1800 mm Scivolo dim., frontale: 1700 mm Finestra H 1500 x W 1900 mm Cuscino idro pneumatico in tavola forza di bloccaggio a P - 0,42 MPa (P 4,2 kg / cm2), kN 2000 forza di espulsione P - 0,45 MPa (P 4,5 kg / cm2), kN 200 Potenza del motore elettrico a trazione principale: 132 kW DIMENSIONI: 5150x4700x11400 Pavimento H7830 mm PESO: 193 tonnellate

Descrizione dell'attrezzatura Pressa per estrusione indiretta usata • Marca / Modello: SMS Hasenclever 28 / 31.5 MN "McKechinstrang" • Tipologia: Impianto di estrusione indiretta orizzontale per billette non ferrose • Azionamento: Unità principale meccanica con ausiliari idraulici • Paese di origine: Germania • Stato attuale: Smontato e disponibile per la spedizione • Numero di serie / Anno di fabbricazione: [Da confermare] 2. Specifiche tecniche chiave Valore parametro Forza del pistone principale 25,07 MN Forza totale della pressa con giunto 31,23 MN Corsa massima 3.070 mm Corsa di lavoro 2.825 mm Velocità del pistone a 28 MN 0–64 mm/sec Velocità del pistone a 31,5 MN 0–57 mm/sec Gamma di diametri billette 230–355 mm Lunghezza billetta (freddo) 320–1.320 mm Resistenza del sistema di riscaldamento del ricevitore; max 63 kW / 375 C Forza di tag ...

Pressa per forgiatura a stampo aperto da 6500 tonnellate HJ / Seonam (Corea) Design: Società dell'Europa orientale Installazione: 2006/2008 Tipo di pressa: Impianto oleodinamico a spinta a quattro colonne Forza nominale (pressione statica di esercizio di 320 bar): 5.000 tonnellate Forza di risalita (pressione statica di esercizio di 420 bar): 6500 Tonnellate Luce diurna: 5.200 mm Corsa della testa a croce mobile: 2.700 mm Diametro pistone principale (cilindro centrale): 1 set - ¢950 mm Diametro pistone laterale (cilindro laterale): 2 set - ¢750 mm Diametro pistone di ritorno: 2 set - ¢300 mm Larghezza della tavola mobile: 2.600×Lunghezza 6.600 mm Corsa tavola mobile (centro su entrambi i lati 2.750 mm): 5.500 mm Velocità di avvicinamento: 300 mm/sec Velocità di forgiatura del cilindro principale (2.200 tonnellate/ 320 bar): 163 mm/sec Velocità di forg ...

VORONEZH K8544 Pressa per stampaggio a caldo ANNO : 1980 / 2008 REVISIONE E INSTALLAZIONE FORZA: 2500ton CORSA RAM : 350 mm DIMENSIONE RAM : 1120X1070 mm DIMENSIONI DEL TAVOLO : 1400X1200 mm NUMERO DI COLPI IN MODALITÀ CONTINUA : 60 NUMERO DI COLPI IN MODALITÀ MANUALE : 26 ALTEZZA DI CHIUSURA : 890 mm CORSA FORO SUPERIORE: 60 mm TAPPO DEL FORO INFERIORE : 70 mm MOTORE PRINCIPALE: 132KW (CAMBIATO IN HYUDAI HEAVY Y2012) INGOMBRO PRESSA : 5380X4680X6400 mm BOLSTER IDRAULICO NUOVO NEL 2007 CONDIZIONE : OTTIME CONDIZIONI DI LAVORO Pressa di rifilatura disponibile

Linea pressa per stampaggio a caldo Sumitomo da 2000 tonnellate Anno 2006 Corsa 350 mm (13.78inch) Colpi al minuto 75 Altezza dell'otturatore 850 mm (33,47 pollici) SlideAdj. 7 mm (.27 pollici) Dimensione ram 1200 mm LR X 1300 mm FB Dimensioni letto 1320 mm LR X 1300 mm FB Sistema di trasferimento a 4 stadi Slide knockout Bottom knockout Sistema di scarto Doppio commutatore Scarpe extra per stampi Disponibile anche riscaldatore billetta e sega ricavata dal pieno Questa linea è stata utilizzata da HONDA per realizzare ingranaggi di trasmissione, prende una billetta, la taglia a misura, la riscalda a 1300 C quindi la pressa la colpisce 4 volte. Può determinare le parti buone da quelle cattive, le parti cattive vengono inviate a un serbatoio di tempra, le parti buone vengono inviate in un trasportatore di raffreddamento che è possibile raccogliere le parti a mano alla fin ...

(2) Pressa per forgiatura orizzontale Asahi THP500-6 (macchina di intestazione) Anno: 2008 Prima corsa: 24 mm Seconda corsa: 50 mm Potenza kickout: 150 kN Altezza aperta: 625 mm Altezza chiusa: 425 mm Stampo (LxL): 500x490 mm Punzone (LxL): 250x350 mm Corsa ram: 200 mm Forza di forgiatura: 5000 kN Tempo di ciclismo: 6,5 sec Velocità manovella: 60 RPM Peso macchina: 28 t

: neu : ca. 3-6 Wochen ab Auftrag : Türkei : 62500 €: 1181.25 €: 63 to: 750 mm: 500 mm: 170 mm: 4 - 102 mm: 54 1/min: 490x325 mm: 90 mm: 270 mm: 440 mm: 7.5 kW: 1800 mm: 1150 mm: 2750 mm: 4100 kg8-fold ram guidefront protection by light guardmanual stroke adjustmentram adjustment witch ratchetdrive over gearcombined clutch brake unit with pneumatic controlfix tablesingle and continuous strokefoot pedal and 2 hand controlmech. overload safety deviceautomatic central lubricationuser manual in GERMAN and ENGLISHaccording to CE rulesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 70300 €: 1328.67 €: 110 to: 900 mm: 540 mm: 180 mm: 14 - 114 mm: 60 1/min: 490x325 mm: 90 mm: 280 mm: 7.5 kW: 1870 mm: 1320 mm: 2800 mm: 5600 kg8-fold ram guidefront protection by light guardmanual ram adjustmentmech. overload safety deviceautomatic lubricationuser manual in GERMAN and ENGLISHaccording to CE rulesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 3-6 Wochen ab Auftrag : Türkei : 79900 €: 1510.11 €: 130 to: 1000 mm: 640 mm: 210 mm: 5 - 110 mm: 60 1/min: 630x400 mm: 90 mm: 330 mm: 11 kW: 2200 mm: 1372 mm: 3000 mm: 8200 kg8-fold ram guidefront protection by light guardmanual ram adjustmentmech. overload safety deviceautomatic lubricationuser manual in GERMAN and ENGLISHaccording to CE rulesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 97800 €: 1848.42 €: 160 to: 1100 mm: 700 mm: 210 mm: 23 - 110 mm: 60 1/min: 630x400 mm: 8 : 95 mm: 65 mm: 325 mm: 480 mm: 2400 mm: 1430 mm: 3200 mm: 9950 kg8-fold ram guidelight guardmot. ram adjustmenthyd. overload safety deviceautomatic lubricationaccording to CE rulesuser manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 3-6 Wochen ab Auftrag : Türkei : 130600 €: 2468.34 €: 200 to: 1200 mm: 740 mm: 220 mm: 24 - 140 mm: 50 1/min: 950x600 mm: 100 mm: 390 mm: 15 kW: 2350 mm: 1700 mm: 3435 mm: 14900 kg8-fold ram guidelight guardmot. ram adjustmenthyd. overload safety deviceautomatic lubricationaccording to CE rulesuser manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure:100 tthroat:540 mmstroke:560 mmdistance table/ram, max. stroke up, adjustment up:800 mmtable surface area:1000 x 1000 mmpressure of drawing cushion in table:50 tstroke of drawing cushion in table:200 mmdie cushion area:710 x 650 mmtable height over floor:910 mmram surface:1000 x 1000 mmcapacity of ejector in ram:2 tejector stroke in ram:200 mmreturn capacity:19,5 tspeed down:400 mm/sspeed up:300 mm/sworking speed:57,7 mm/soil volume:650 lpower requirement:37,5 kWweight:15,0 tdimensions (WxDxH):1,5 x 2,5 x 4,45 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion / ejector in table:hydraulisch ejector in ram:hydraulisch depth stop:mechanisch

pressure:40 tthroat:360 mmstroke:500 mmdistance table/ram, max. stroke up, adjustment up:660 / 1000 mmtable surface area:630 x 500 mmhole in the table:200 mmtable height over floor:1060 / 720 mmram surface:450 x 360 mmspeed down:60 mm/sspeed up:300 mm/spower requirement:7,5 kWweight:2,75 tdimensions (WxDxH):1,0 x 1,8 x 3,05 madditional plate in table:height approx. 340 mm

pressure:050 tthroat:255 mmstroke:8 - 120 mmno. of strokes:115 /mindistance table/ram, max. stroke up, adjustment up:380 mmtable surface area:640 x 500 mmhole in the table:250 x 180 mmtable height over floor:710 - 930 mmtable adjustable:220 mmram surface:550 x 170 mmram adjustment:70 mmpower requirement:4,0 kWweight:3,1 tdimensions (WxDxH):1,5 x 1,5 x 2,3 m

pressure:150 tdistance between columns:300 mmstroke:180 mmdistance table/ram, max. stroke up, adjustment up:300 mmtable surface area:570x180 / 300x410 mmtable height over floor:875 mmside window:180 mmram surface:180 mmspeed down:250 mm/sspeed up:160 mm/sworking speed:6 - 12 mm/soil volume:250 lpower requirement:11,0 kWweight:2,4 tdimensions (WxDxH):1,3 x 1,3 x 2,4 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 § 20 foundation pit:nicht erforderlich

pressure:40 tthroat:360 mmstroke:400 mmdistance table/ram, max. stroke up, adjustment up:600 mmtable surface area:620 x 500 mmpressure of drawing cushion in table:16 tstroke of drawing cushion in table:150 mmtable height over floor:850 mmram surface:300 x 250 mmspeed down:200 mm/sspeed up:200 mm/sworking speed:40 mm/spower requirement:11,0 kWweight:2,8 tdimensions (WxDxH):1,1 x 1,7 x 3,0 mdrawing cushion in table:hydraulisch

pressure:63 tthroat:320 mmstroke:200 mmdistance table/ram, max. stroke up, adjustment up:450 mmtable surface area:750 x 600 mmpressure of drawing cushion in table:6,5 tstroke of drawing cushion in table:80 mmdie cushion area:240 mmtable height over floor:800 mmram surface:500 x 450 mmcapacity of ejector in ram:0,5 tejector stroke in ram:70 mmspeed down:300 mm/sspeed up:300 mm/sworking speed:50 mm/soil volume:380 lpower requirement:12,0 kWweight:6,5 tdimensions (WxDxH):1,3 x 2,0 x 2,75 mdrawing cushion in table:hydraulic ejector in ram:hydraulic depth stop:mechanical cutting impact cushioning:hydraulic

Controllo dei piedi, Auction-ID: A1-50476-13

pressure:050 tthroat:250 mmstroke:8 - 120 mmno. of strokes:100 /mindistance table/ram, max. stroke up, adjustment up:400 mmtable surface area:650 x 515 mmhole in the table:115 mmtable height over floor:790 - 1020 mmtable adjustable:230 mmram surface:390 x 180 mmram adjustment:70 mmpower requirement:2,0 kWweight:2,6 tdimensions (WxDxH):1,1 x 1,4 x 2,2 moverload protection in ram:mechanical

pressure:200 tdistance between columns:1050 mmstroke:150 mmdistance table/ram, max. stroke up, adjustment up:450 mmtable surface area:1000 x 1200 mmtable height over floor:850 mmside window:500 mmram surface:1050 x 870 mmspeed down:300 mm/sspeed up:300 mm/sworking speed:18 - 36 mm/spower requirement:37,0 kWweight:16,0 tdimensions (WxDxH):4,0 x 3,6 x 3,4 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in table:hydraulisch cutting impact cushioning:hydraulisch foundation pit:nicht erforderlich

pressure:100 tthroat:315 mmstroke:30 - 160 mmno. of strokes:40 /mindistance table/ram, max. stroke up, adjustment up:460 mmtable surface area:910 x 680 mmHole in the table:400 mmtable height over floor:800 mmpassage to the back:400 mmram surface:630 x 400 mmram adjustment:80 mmpower requirement:7,5 kWweight:7,5 tdimensions (WxDxH):1,7 x 2,0 x 3,0 mGerman Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch:pneumatic overload protection in ram:mechanical ram counterbalance:pneumatic

pressure:080 tthroat:300 mmstroke:8 - 112 mmno. of strokes:60 /mindistance table/ram, max. stroke up, adjustment up:467 mmtable surface area:710 x 560 mmhole in the table:240 x 115 mmtable height over floor:800 mmram surface:400 x 315 mmram adjustment:80 mmpower requirement:7,5 kWweight:5,1 tdimensions (WxDxH):1,4 x 1,9 x 2,7 mGerman Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 overload protection in ram:mechanical

pressure:060 tthroat:220 mmstroke:6 - 94 mmno. of strokes:115 /mindistance table/ram, max. stroke up, adjustment up:340 mmtable surface area:680 x 400 mmhole in the table:120 x 70 mmtable height over floor:750 mmpassage to the back:290 mmram surface:240 x 240 mmram adjustment:57 mmpower requirement:3,7 kWweight:2,8 tdimensions (WxDxH):1,5 x 1,5 x 2,2 mGerman Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch:pneumatic

pressure:100 tdistance between columns:1180 mmstroke:1 - 120 mmno. of strokes:90 /mindistance table/ram, stroke up:470 mmtable surface area:1100 x 700 mmtable height over floor:800 mmside window:400 mmram surface:740 x 350 mmram adjustment:100 mmpower requirement:37,0 kWweight:11,0 tdimensions (WxDxH):2,3 x 2,0 x 3,5 mknuckle-joint press:hydraulisch angetrieben T-slots in table and ram acc. to specification:auf Anfrage foundation pit:nicht erforderlich

Pressure:630 tdistance between columns:1600 mmstroke:fix 250 mmno. of strokes:20 /mindistance table/ram, max. stroke up, adjustment up:900 mmtable surface area:1550 x 1200 mmtable height over floor:800 mmside window:620 mmram surface:1360 x 1200 mmram adjustment:160 mmheight over floor:5,9 mheight beneath floor:0,6 mpower requirement:32,0 kWweight:59,0 tdimensions (WxDxH):3,0 x 2,2 x 6,5 mclutch:pneumatisch overload protection in ram:hydraulisch ram adjustment:motorisch ram counterbalance:pneumatisch

pressure:500 tdistance between columns:3400 mmstroke:850 mmno. of strokes:9 - 18 /mindistance table/ram, max. stroke up, adjustment up:2050 mmtable surface area:3100 x 1900 mmtable height over floor:400 mmside window:1550 mmram surface:3100 x 1900 mmram adjustment:350 mmpressure of drawing cushion in ram:70 tpressure of drawing cushion in table:140 tstroke of drawing cushion in table:0 - 250 mmstroke of drawing cushion in ram:150 mmheight beneath floor:6,0 mheight over floor:8,3 mweight:155,0 tdimensions (WxDxH):5,1 x 4,5 x 12,3 mKind of drive:link drive tool changing unit:2 x

pressure:500 tdistance between columns:3400 mmstroke:850 mmno. of strokes:9 - 18 /mindistance table/ram, max. stroke up, adjustment up:2050 mmtable surface area:3100 x 1900 mmtable height over floor:400 mmside window:1550 mmram surface:3100 x 1900 mmram adjustment:350 mmpressure of drawing cushion in ram:70 tpressure of drawing cushion in table:140 tstroke of drawing cushion in table:0 - 250 mmstroke of drawing cushion in ram:150 mmheight beneath floor:6,0 mheight over floor:8,3 mweight:155,0 tdimensions (WxDxH):5,1 x 4,5 x 12,3 mKind of drive:link drive tool changing unit:2 x

pressure:500 tdistance between columns:3400 mmstroke:850 mmno. of strokes:9 - 18 /mindistance table/ram, max. stroke up, adjustment up:2050 mmtable surface area:3100 x 1900 mmtable height over floor:400 mmside window:1550 mmram surface:3100 x 1900 mmram adjustment:350 mmpressure of drawing cushion in ram:70 tpressure of drawing cushion in table:140 tstroke of drawing cushion in table:0 - 250 mmstroke of drawing cushion in ram:150 mmheight beneath floor:6,0 mheight over floor:8,3 mweight:155,0 tdimensions (WxDxH):5,1 x 4,5 x 12,3 mKind of drive:link drive tool changing unit:2 x