presse usati in vendita (1,706)

pressure:315 tdistance between columns:1750 mmstroke:700 mmdistance table/ram, max. stroke up, adjustment up:1200 mmtable surface area:1600 x 1500 mmpressure of drawing cushion in table:125 tstroke of drawing cushion in table:200 mmdie cushion area:1200 x 1400 mmtable height over floor:750 mmram surface:1640 x 1500 mmpower requirement:55,0 + 11,0 kWweight:29,5 tdimensions (WxDxH):3,2 x 4,5 x 5,8 mHeight above floor:5,1 mGerman Safety: permitted for manual loading:CE-Norm - EN 692, BGR 500 drawing cushion in table:hydraulisch cutting impact absorption:hydraulic

pressure:3500 tstroke:900 mmDistance table / ram, stroke down:1000 mmdistance table / ram, stroke up:1900 mmtable surface area:3150 x 2150 mmram surface:3150 x 2150 mmTotal Weight of Tool max.:30,0 tWeight of Tool Top Part max.:20,0 tspeed down:400 mm/sworking speed:0,9 - 9,2 mm/sHydraulic Operating Pressure:280 baroil volume:5500 lrated current:760 Avoltage:400 Vfrequency:50 Hzpower requirement:425 kWweight:231,0 t

Pressure:080 tthroat:280 mmstroke:20 - 120 mmno. of strokes:42 - 125 /mindistance table/ram, max. stroke up, adjustment up:510 mmtable surface area:700 x 560 mmhole in the table:280 mmtable height over floor:800 mmpassage to the back:320 mmram surface:560 x 350 mmram adjustment:72 mmWeight:5,2 tDimensions (WxDxH):1,6 x 1,6 x 2,6 mGerman Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch:pneumatic overload protection in ram:mechanical

Pressure:63 tdistance between columns:1000 mmstroke:300 mmDistance table/ram, max. stroke up, adjustment up:850 mmtable surface area:980 x 500 mmtable height above floor:850 mmram surface:130 mmspeed down:400 mm/sspeed up:461 mm/sworking speed:14 - 97 mm/spower requirement:15,0 kWWeight:5,0 tDimensions (WxDxH):2,0 x 1,6 x 3,9 mdepth stop:mechanical foundation pit:not necessary

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 48500 €: 926.35 €: 60 to: 3.5 mm: 500 mm: 700 mm: 190 mm: 1 - 100 mm: 65 1/min: 4 : 70 mm: 45 mm: 260 mm: 340 mm: 5.5 kW: 1250 mm: 1350 mm: 2400 mm: 3500 kgWelded steel frame construction4-fold ram guidePneumatic clutch-brake combinationProtective enclosure with light barriers and side doorsMechanical overload protectionTwo-hand and foot pedal operationManual stroke adjustmentManual ram adjustmentOperating modes: Adjustment mode Two-hand release Foot release 2-stroke operation via light barriers Continuous operationAutomatic central lubricationEquipment in accordance with CE regulationsOPTIONS:vibrations padsbolster plateThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pressure:080 tthroat:300 mmstroke:8 - 140 mmno. of strokes:60 / 90 /mindistance table/ram, max. stroke up, adjustment up:420 mmtable surface area:800 x 600 mmhole in the table:330 x 230 mmtable adjustable:230 mmtable height over floor:750 - 980 mmram surface:600 x 240 mmram adjustment:100 mmpower capacity:4,5 / 6,9 kWWeight:5,5 tDimensions (WxDxH):1,4 x 2,5 x 2,6 mGerman Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch-/ brake combination:hydraulic overload protection in ram:hydraulic

Pressure:160 tdistance between columns:1250 mmstroke:500 mmdistance table/ram, max. stroke up, adjustment up:700 mmTable area:1200 x 800 mmtable height over floor:850 mmdie cushion pressure in table:63 ? tdie cushion stroke in table:200 mmdie cushion area:780 x 650 mmside window:300 mmram surface:1000 x 800 mmspeed down:400 mm/sspeed up:400 mm/sworking speed:106 mm/soil volume:1800 lpower capacity:2 x 30,0 kWweight:16,7 tDimensions (WxDxH):2,45 x 2,35 x 4,5 m

Pressure:150 tstroke:fix 80 mmno. of strokes:30 - 150 /mindistance between columns:930 mmdistance table/ram, max. stroke up, adjustment up:400 mmtable surface area:880x1300/1500x600 mmhole in the table:760 x 180 mmtable height over floor:1270 mmcolumn travel -side:650 mmram surface:920x1000/1300x600 mmweight:27,5 tDimensions (WxDxH):3,1 x 1,8 x 4,3 mWITHOUT feeder:can be offered optionally

pressure:100 tdistance between columns:770 mmstroke:400 mmdistance table/ram, stroke up:800 mmTable area:770 x 900 mmtable height above floor:850 mmdie cushion pressure in table:40 tdie cushion stroke in table:200 mmdie cushion area in table:600 x 600 mmside window:600 mmram surface:770 x 900 mmspeed down:62 mm/sspeed up:350 mm/sworking speed:17,5 mm/soil volume:700 lpower requirement:42,0 kWweight:9,0 tDimensions (WxDxH):2,6x 2,0 x 3,8 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in table:hydraulic

pressure:315 tdistance between columns:1800 mmstroke:400 mmDistance table/ram, max. stroke up, adjustment up:650 mmtable surface area:1800 x 1000 mmtable height over floor:900 mmdie cushion pressure in table:80 tdie cushion stroke in table:100 mmDie cushion area in table:1300 x 600 mmside window:600 mmram surface:1800 x 1000 mmspeed down:400 mm/sspeed up:300 mm/sworking speed:15 - 80 mm/soil volume:1700 lpower requirement:55,0 kWweight:27,5 tdimensions (WxDxH):3,1 x 2,2 x 4,6 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 die cushion in table:hydraulic foundation pit:not necessary

pressure:320 tdistance between columns:1530/1370 mmstroke:320 mmdistance table/ram, stroke up:830 mmtable surface area:1500 x 650 mmdie cushion pressure in table:12,5 ttable height over floor:1100 mmside window:570 mmram surface:1240 x 650 mmcapacity of ejector in table:12,5 tspeed down:450 mm/sspeed up:440 mm/sworking speed:63,6 mm/soil volume:2100 lpower requirement:2 x 45,0 kWweight:27,0 tdimensions (WxDxH):4,0 x 2,3 x 4,9 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in table:hydraulic drawing cushion in ram:hydraulic ram interlocking:hydraulic Option: NEW electrical controls:Siemens S7-1500 F

: neu : ca. 8 Wochen ab Auftragse : Italien : 173600 €: 3281.04 €: 200 to: 7 mm: 1350 mm: 800 mm: 250 mm: 18 - 180 mm: 35 - 50 1/min: 900x570 mm: 8 : 110 mm: 410 mm: 820 mm: 22 kW: 1500 mm: 2633 mm: 3950 mm: 20000 kgtouch screen controlsemi automatic stroke adjustmentdie space adjustment with mechanical display decimal resolutionadjustable motor speedoverload protectorautomatic cams resetdouble bolster plateoil circular lubricationdynamic brakesafety light guard KeyenceAutomation and control of press parameters by PLC, alarms and informations displayd on human machine interface touch screen.Standard monitoring:- press speed view and adjustment- programmable piece counter and maintenance piece counter- die space adjustment with brake motor- Semi automatic or automatic stroke adjustment- die safety control- alarms view- overload protectorPRICE FCA ITALYThe data for this ad was created  ...

pressure:160 tdistance between columns:1580/1360 mmstroke:320 mmdistance table/ram, max. stroke up, adjustment up:830 mmtable surface area:1460 x 850 mmtable height over floor:1100 mmside window:870 mmram surface:1400 x 850 mmspeed down:540 mm/sspeed up:520 mm/sworking speed:26 - 85 mm/soil volume:2100 lpower requirement:45,0 kWweight:22,6 tdimensions (WxDxH):4,0 x 2,3 x 4,9 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 ram interlocking:hydraulisch

pressure:160 tdistance between columns:1600/1420 mmstroke:345 mmdistance table/ram, max. stroke up, adjustment up:830 mmtable surface area:1460 x 850 mmtable height over floor:1100 mmside window:770 mmram surface:1410 x 850 mmspeed down:540 mm/sspeed up:520 mm/sworking speed:26 - 85 mm/soil volume:2100 lpower requirement:45,0 kWweight:23,0 tdimensions (WxDxH):4,0 x 2,3 x 4,9 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 ram interlocking:hydraulisch

pressure:025 tthroat:200 mmstroke:8 - 80 mmno. of strokes:60 - 180 /mindistance table/ram, max. stroke up, adjustment up:330 mmtable surface area:560 x 400 mmhole in the table:150 mmtable height over floor:800 mmpassage to the back:240 mmram surface:355 x 220 mmram adjustment:50 mmweight:3,0 tdimensions (WxDxH):1,0 x 1,4 x 2,2 minfinitely variable drive:Stöber overload protection in ram:mechanical NEW electrical controls:Pilz

: neu : ca. 12 Wochen ab Auftrags : Türkei : 100 to: 400 mm: 850x630 mm: 850x640 mm: 685 mm: 250 mm/s: 10-20 mm/s: 11 kW: 2030 mm: 1150 mm: 3565 mm: 7700 kgNC control with touchscreen8-fold ram guidetable and ram with T-slots2 hand operationpressure adjustmentstroke adjustmentdie cushioncentral lubrication systemlight guarduser manual in German or Englishaccording to CE rulesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure:300 tdistance between columns:1800 mmstroke:1000 mmDistance table/ram, max. stroke up, adjustment up:1300 mmTable surface area:1600 x 1200 mmTable height above floor:1080 mmRam surface:1600 x 1200 mmWeight:24,0 tDimensions (WxDxH):2,8 x 2,1 x 6,0 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2

pressure:100 tthroat:360 mmstroke:500 mmdistance table/ram, max. stroke up, adjustment up:800 mmtable surface area:900 x 560 mmtable height over floor:710 mmram surface:630 x 400 mmspeed down:200 mm/sspeed up:200 mm/spower requirement:17,0 kWweight:5,0 tDimensions (WxDxH):1,2 x 1,9 x 3,3 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2

pressure:400 tdistance between columns:1100 mmstroke:250 mmno. of strokes:25 - 75 /mindistance table/ram, max. stroke up, adjustment up:900 mmtable surface area:1100 x 965 mmcapacity of ejector in table:30 tejector stroke of ejector in table:80 mmcapacity of ejector in ram:3 tstroke of ejector in ram:60 / 70 mmram surface:980 x 800 mmcolumn travel -side:800 mmram adjustment:20 mmpower capacity:80,0 + 5,5 kWweight:47,0 tDimensions (WxDxH):3,5 x 3,3 x 6,0 mweight of switch cabinet:1,4 tdimensions of electrical cabinet (WxDxH):4,9 x 0,5 x 2,6 mejector in ram:hydraulic

Pressure:040 tthroat:180 mmstroke:0 - 76 mmno. of strokes:145 /mindistance table/ram, max. stroke up, adjustment up:350 mmtable surface area:600 x 360 mmhole in the table:110 mmtable height over floor:800 mmram surface:270 x 175 mmram adjustment:65 mmpower capacity:2,2 kWweight:1,75 tDimensions (WxDxH):1,1 x 1,2 x 2,1 mGerman Safety: permitted for manual loading:CE-sign clutch:pneumatic

pressure:100 tdistance between columns:1250 mmstroke:1035 mmtable surface area:890 x 1280 mmdistance table/ram, max. stroke up, adjustment up:1035 mmtable height over floor:630 mmram surface:1000 x 1200 mmside window:700 mmmax. tool weight:7 tmax. capacity of swivelling ram plate:3,5 toil volume:180 lpower capacity:9,0 kWweight:11,0 tDimensions (WxDxH):2,1 x 3,8 x 3,9 mram interlocking:hydraulic

pressure:620 tdistance between columns:2250 mmstroke:1250 mmDistance table/ram, max. stroke up, adjustment up:1600 mmtable surface area:2200 x 1280 mmram surface:2200 x 1500 mmtable height over floor:800 / 1000 mmcolumn travel -side:750 mmfeed down:10 - 250 mm/secfeed up:10 - 500 mm/secworking feed:1 - 24 mm/secoil volume:2000 lpower capacity:45,0 + kWweight:42,0 tDimensions (WxDxH):3,7 x 2,6 x 6,8 mGerman Safety: permitted for manual loading:CE-sign foundation pit:not necessary

pressure:080 tthroat:280 mmstroke:8 - 112 mmno. of strokes:30 - 120 /mindistance table/ram, max. stroke up, adjustment up:500 mmtable surface area:840 x 580 mmhole in the table:150 mmtable height over floor:910 mmpassage to the back:640 mmram surface:560 x 300 mmram adjustment:80 mmpower requirement:7,5 kWweight:8,0 tdimensions (WxDxH):1,6 x 2,3 x 3,3 mGerman Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 overload protection in ram:hydraulisch ram adjustment:motoric

pressure:025 tthroat:200 mmstroke:8 - 80 mmno. of strokes:180 /mindistance table/ram, max. stroke up, adjustment up:330 mmtable surface area:550 x 400 mmhole in the table:60 mmtable height over floor:800 mmpassage to the back:200 mmram surface:355 x 220 mmram adjustment:50 mmpower requirement:2,7 kWweight:2,5 tdimensions (WxDxH):1,2 x 1,8 x 2,4 moverload protection in ram:mechanical

Pressure:035 tthroat:225 mmstroke:8 - 100 mmno. of strokes:130 /mindistance table/ram, max. stroke up, adjustment up:370 mmtable surface area:580 x 450 mmhole in the table:210 x 170 mmtable height over floor:700 mmram surface:350 x 180 mmram adjustment:70 mmpower requirement:2,2 kWweight:2,2 tdimensions (WxDxH):1,0 x 1,8 x 2,2 mGerman Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch:hydraulic overload protection in ram:mechanical

pressure:120 tdistance between columns:430 mmstroke:125 mmdistance table/ram, stroke up:400 mmtable surface area:430 x 450 mmtable height over floor:860 mmside window:230 mmram surface:250 mmworking speed:10 mm/spower requirement:11,0 kWweight:2,5 tdimensions (WxDxH):1,6 x 1,3 x 2,4 mGerman Safety: permitted for manual loading:CE-sign

Pressure:250 tstroke:30 mmno. of strokes:60 - 500 /minDistance between columns:1500 mmdistance table/ram, max. stroke up, adjustment up:390 mmtable surface area:1580 x 1100 mmhole in the table:1270 x 300 mmtable height over floor:1470 mmside window:600 mmram surface:1500 x 900 mmram adjustment:100 mmmaterial width:500 mmmaterial thickness:0,5 - 1,5 mmcoil weight:6,5 tcoil internal diameter:420 - 560 mmcoil external diameter:1500 mmpower capacity:45,0 kWWeight:44,0 tDimensions (WxDxH):3,3 x 1,8 x 4,5 mclutch:pneumatisch ram adjustment:motorisch double decoiler:LH 2-1,5-500 straightening machine:R 500 roll feed:mechanisch; Schuler, WK 8-500

impact energy:207951 mkgram hammer stroke:660 mmno. of strokes:100 /minimpact energy:2040 kJdistance lower die block / ram gudeway:660 mmThroat:750 mmsteel forging - rectangular up to:240 mmsteel forging - diameter up to:270 mmpower requirement:75,0 kWweight of hammer:16,5 tweight of anvil:15,5 tram hammer weight:750 kgweight:32,0 tdimensions (WxDxH):3,2 x 1,45 x 3,45 mMode of operation:pneumatisch

pressure:500 tdistance between columns:1910 mmstroke:500 mmDistance table/ram, max. stroke up, adjustment up:700 mmtable surfache without cutting impact cushions:1910 x 1360 mmtable surfache with cutting impact cushions:1600 x 1360 mmtable height over floor:800 mmram surface:1600 x 1270 mmSide window:600 mmspeed down:400 mm/sspeed up:330 mm/sworking speed:10 - 28 mm/soil volume:1200 lpower requirement:60,0 kWweight:40,0 tDimensions (WxDxH):3,6 x 2,5 x 5,0 mheight over floor:4,5 mGerman Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 cutting impact cushioning:hydraulic ram interlocking:hydraulic

pressure:200 tdistance between columns:1400 mmstroke:300 mmdistance table/ram, max. stroke up, adjustment up:500 mmtable surface area:1300 x 1100 mmpressure of drawing cushion in table:80 tstroke of drawing cushion in table:150 mmdie cushion area:700 x 700 mmcapacity of ejector in ram:10 tejector stroke in ram:50 mmtable height over floor:930 mmside window:770 mmram surface:1300 x 1100 mmspeed down:400 mm/sspeed up:410 mm/sworking speed:20 - 50 mm/sreturn capacity:30 toil volume:1350 lpower requirement:70,0 kWweight:23,0 tdimensions (WxDxH):4,5 x 3,0 x 3,5 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in table:hydraulic ejector in ram:hydraulic foundation pit:not necessary