macchine farmaceutici e cosmetici usati in vendita (368)

Pompa centrifuga, motore 1,5kw, granta 160mm, massimo 18bar 55m3/h, 2800rpm, ingresso/uscita 65/51mm

Dimensione della girante 130mm, massimo 18bar, 33m3/h 2800rpm, ingresso/uscita 51/51mm

Unimix SRC1600 vaso di lavorazione a vuoto (recipiente -1/2bar, 133C, capacità totale 2145Ltr, capacità operativa 1600Ltr; camicia 4bar, 151C, 130Ltr., fondo scavato, sollevamento idraulico per aprire la parte superiore, con EKATO S-Jet Homogeniser SJ 1000 SO EX sul fondo del serbatoio (380 V, 18kw, 3000rpm, nuovo 2009), agitatore ancora/raschiatore (nuovo 2022) con motore ATEX PTB in alto (380'V, 13,5kw), , pompa a vuoto Elmo Rietschle L300 2BV5111 incorporata all'interno del corpo principale, pressione di lavoro -1/+3bar, dimensioni esterne del reattore 1950x2300x2900 altezza (incluso motore), montata sul telaio (dimensione del pavimento 2200x3300, altezza del telaio 300mm), materiale in acciaio inox, nuovo software operativo 2022, il reattore è ancora in uso per la produzione cosmetica, anno di costruzione della nave principale 1992, tutti i dati di ricondizionamento disponibili.  ...

YSTRAL InLine Mixer Conti TDS-3, potenza 15 kW, 3000 giri/min, temperatura massima del liquido per miscelazione 135°C, motore elettrico PTB 98 ATEX 1106, inclusi cabina di alimentazione, controllo della frequenza e controllo di funzionamento. La macchina è in condizioni di funzionamento, utilizzata per la produzione di cosmetici. A un prezzo ridotto rispetto a quello nuovo. Pronto per la spedizione. Siete i benvenuti a ispezionare la macchina a Tallinn. Informazioni dettagliate disponibili su richiesta.

ADMV Alimentatore per tubi La macchina è stata utilizzata come dosatore di tubi per mascara Pannello di controllo Siemens

Alimentatore di tappi per vari tipi di tappi, tubi, bottigliette, ecc. Weckerle Kappen B Acciaio inossidabile Anno 1998 2 pz disponibili

GRACO pneumatic pump, Max Flow: 9.5 L/MIN / 2.5 GPM, Max Air WPR: 1.2 MPa / 12 bar / 180 PSI , Max Fluid WPR: 6.2 MPa / 62 bar / 900 PSI

Disinfecting washer for laboratory., Upper basket for injection, Lower basket, Maximum cold water temperature (°C): 20 °C , Maximum hot water temperature (°C): 70 °C , External dimensions (mm): 730x900 H 845 , Interior dimensions (mm): 500x540 H 600

Ventilated safety cabinet with KOTTERMANN brand tray retention, Total retention volume 21.3 litres, With doors equipped with a cylinder to lock the doors open or to close them automatically., To connect to a centralized suction system via two DN70mm air inlets, 3 fixed shelves with retention:, - 1 shelf unit 385x515 H 220 mm (retention volume 5.8 Liters), - 1 shelf unit 385x515 H 220 mm (retention volume 5.8 Liters), - 1 shelf unit 285x1010 H 275mm (Retention volume 9.7 Liters), External dimensions (mm): 570x1200 H 745 mm

Motorized curved stainless steel belt conveyor, Width of strip 100mm, Adjustable feet in height up to 150 mm, Motorized conveyor: Yes, Conveyor belt width (mm): 90 , Maximum working height (mm): 1055, Electric: Motor: SEW-USOCOME: 230 V / 50 Hz / 0.55 kW

METTLER TOLEDO weigher feeder of type XS1, From left to right, Balance model: METTLER TOLEDO Type: BF2-L-P, Max weighing range (g): 100 g, Mini weighing range (g): 5 , e:: 0.01 g , d :: 0,01 , T=- :: 90 g , Dimensions (mm): 900x700 H 174 mm , Conveyor belt width (mm) :: 100 mm , Balance belt width (mm) :: 57 mm

ZALKIN capping machine, Type TM3

Vertical VAI packaging machine with dosing screw for powder., Sold with its platform and format., Pouch, Stopped in December 2025, Electrically renovated in SIEMENS S7, Mini format bag (mm): 40x30 h , Maxi format sachet (mm): 270x380 h , Cadence (bpm): 60, maxi format sachet (mm): 270x380 h , Elec: 380 V , Machine dimensions (mm): 2030x132 H 1670 , Platform (mm): 1810x180 H 2900 , Power (kW): 4

Security cabinet with forced ventilation from the KOTTERMANN brand, Ventilité tested and functional (230Volt), to be connected via a DN70 outlet, 3 shelves with mobile drawers and containment bins:, - 500x435 H 295 mm (volume of the tray 12 Litres), - 500x435 H 215 mm (volume of the tray 12 Litres), - 500x435 H 285 mm (volume of the tray 12 Litres), 1 fixed shelf, - 210x555 H 240 mm, Elec: 230 V / 50 Hz / 15 Watt , External dimensions (mm): 530x1200 H 720

Motorized belt conveyor., Motorized conveyor: Yes, Conveyor belt length (mm): 3000, Conveyor belt width (mm): 500 mm , Working height (mm): 390 mm , Electric: GYROS: 230 / 400 V / 50 Hz / 1.45/ 0.84 A / 0.25 KW , Speed variation: Yes

Pneumatic dimensional measurement device Solex Metrology, PNEUMATIC VERSION, Pneumatic metrology is a dimensional measurement technique for parts, presenting two important advantages:, - the great measurement precision, - measurement speed, This device is used for dimensional control of parts with holes whose dimensions must comply with very tight tolerances, parts that cannot be touched due to their surface condition, or parts with complex geometry., It has thus been present for many years in industrial sectors such as biomedical (prostheses), cosmetics (sprays), pharmaceuticals (dosing pumps), aerospace or automotive (mechanical parts), where it is recognized for its robustness, reliability and very high measurement precision., PRINCIPLE OF OPERATION, The principle is based on a pneumatic flowmeter that operates by direct reading of the drop or rise in pressure corresponding to the cha ...

Motorized vertical test bench IMADA MV-100BA., Dynanometer Chatillon:, 100 x .05 Lb, 50 x 05 Kg, 500 x .5 N

Ventilator, BINDER CO2 incubator, Volume 150 litres, 2 shelves, Internal dimensions (mm): 490x495 H 595, external dimensions (mm): 820x757 H 1175, Number of shelves: 2, Elec: 230V / 7.4 A / 50 Hz , Maximum temperature (°C): 60

GLATT coating turbine, Glatt GC 750/500 enrobing machine from 1994 with interchangeable drums, explosion-proof version (Ex), - Processing equipment: Glatt GC 750 Coater (equipment used only for testing), - Perforated drums (diameters 500 mm and 750 mm) with:, Air intake and discharge housings for both drums, Drum capacity 750 mm: 50 – 75 kg/batch, Drum capacity 500 mm: 15 – 45 kg/batch, - Manual unloading, - Spray arm with nozzle adapter, Spraying system with 1 Schlick nozzle, - Control cabinet (pneumatic/electric) with Siemens S5 PLC, - Air handling unit (AHU) 7AIR comprising:, - Inlet air fan, - Filtration F7 and H12, - Preheating, - Dehumidification, - Heating, - HERDING Dust Collector, - Outlet air fan, - WIP spray nozzle (in-place cleaning) inside the drum and external nozzle, Elec: 3x400 / 24VDC / 50Hz , Useful volume: 500mm: 15-45kg 750mm : 50 - 75kg , Spray nozzles: X, ...

Laser marking Marken Imaje Smartlase 130x

Removal of label from the top with label dispensing system AVERY type ALX734LH, Sold with its stainless steel mast., Labeler / Stickerer AVERY DENISON type ALX 734LH :, - Printing speed: 50 to 400 mm/s, - Print width: 104 mm max, - Ribbon width: 20-140 mm, - Label production: Up to 400 labels, - Label width: 30 to 134 mm, - Label length: 25 to 225 mm, - Chuck diameter: 38.76,102 mm, - Roll diameter: 300 or 400 mm, Minimum label deposition height (mm): 1225, Maximum label deposition height (mm): 1400

Motorized curved stainless steel belt conveyor, Width of strip 100mm, Adjustable feet in height up to 150 mm, Motorized conveyor: Yes , Conveyor length (mm): 700mm, Conveyor belt width (mm): 90mm, Maximum working height (mm): 1050mm, Electric: Motor: SEW-USOCOME: 230 V / 50 Hz / 0.55 kW , Speed variation: no

The ZANASI 40 E model is a reciprocating motion machine designed for the processing and filling of two-piece hard capsules, as well as their sequential closing and ejection., Possibilities for powder dosing as well as granule dosing., Several powder formats available:, Full format:2,4, Cadence / hour: 40 000 capsules/hour , Positions: 6 , Machine absorption (Kw): 2.2 kW , Elec: 380 V / 50 Hz / 14.2 A

Markem Imaje UI 100 control panel., Connects to a MARKEM laser marking system

Dissolution tester SOTAX CE70., SOTAX CY 7-50 Pump, Sold with accessories., Positions: 7 , Elec: 230 V

Compressore Rimek, 10 stazioni, 6 tonnellate di compressione, Per utensili di tipo B, Diametro massimo delle compresse 16 mm, Riempimento massimo 17 mm, Velocità massima 18 000 compresse all'ora, Numero di giri al minuto: 30, Venduto con diversi formati: diametro rotondo 6 mm incompleto mancante 1 stampa, diametro rotondo 7 mm completo, diametro rotondo 12 mm completo, diametro oblungo 18x7 mm completo, Elettrico: 230 V / 50 Hz, Dimensioni (mm): 563x530, Cadenza/ora: 18000, Numero di giri/min: 30, Compressione (kN): 6 tonnellate, Dimensioni massime della compressa (mm): 16, Altezza massima di riempimento della polvere (mm): 16, Altezza macchina con

Serbatoio ad alta pressione, Capacità (in L): 20 L, Pressione massima (in Bar): 6,9 Bar, Temperatura massima (in C): 121 °C, Capacità: 20 L, Dimensioni (mm): ⌀ 230 mm, Altezza (mm): 640 mm, Temperatura massima (in C): 121 °C

Gellulier LGA, macchine per riempire 100 capsule con vibratori., Formato attuale: misura 2., Dimensioni (mm): 355x260 H 210

Gelulleuse MACOFAR per polvere tipo CD20, venduta con 3 formati di polvere: 00, 0 e 1, velocità teorica massima: 20.000 / ora, 50Hz / 2,5kW, peso netto 800kg, venduta con la sua pompa a vuoto, Elettrica:: 3+N+P, Link al produttore: .romaco/prodotti/dettagli prodotto/serie cd

La pompa SolidC UltraPure è una pompa centrifuga efficiente ed economica che soddisfa le esigenze dell'industria farmaceutica. Maneggia delicatamente i prodotti e resiste agli agenti chimici., Pompa: Pompa centrifuga, Dn (mm): 34, tipo motore: WEG, dn (mm): 34, Potenza motore: 380 V 50 Hz 7,5 kW, Collegamento al produttore: .alfalaval.fr/produits/transfert-des-fluides/pompes/pompes-centrifuges /solidc-ultrapure/