sottocategorie
(terzo livello di categoria)
Fabbricante:
(Categoria: 107)
: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 5932 €: 114.49 €: 3/4 26,9 mm, 1 33,7 mm, mm: 5 mm: 3 mm: 93 kgThe motor driven AL 1-2U can be used to notch pipes with an external diameter of 27.9 mm 26.9 mm (3/4",), 33.7 mm (1",), 42.4 mm (1 1/4",), 48.3 mm (1 1/2",) and 60.3 mm (2",)and notch pipes with an external diameterof 22 mm to 76 mm for sink outflows.Do you often have to notch pipes? If so, the motor-driven AL1-2U equipped with a 2.2 kW electric motor is the ideal solution!The motor forms one unit with the special eccentric shaft that drives the notching tool. The motor is also equipped with an on/off switch with a zero voltage protection and guard.All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are readily available, ideal for double corner joints.The data for this ad was created ...
: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 879 €: 20 - 76,1 mm: 3 mm: 2.5 mm: 7 kgThe ALU can be used to notch a sink outflow in pipes with an external diameter of 22 mm to 76 mm.Since ALMI pipe notchers have a favourable price and high productivity they are an excellent investment.ALMI pipe notchers are available for cutting out venting slots in round and rectangular met pipes with an external diameter from 27 mm upwards and a wall thickness of a maximum of 3 mm.All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are immediately available.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 811 €: 3/4 26,9 mm, 1 33,7 mm, mm: 3 mm: 2.5 mm: 8 kgThe AL 1 can be used to notch pipes with an external diameter of 26.9 mm (3/4",), 33.7 mm (1",) and 42.4 mm (1 1/4",).The hand-operated machines can be easily wall mounted.With ALMI pipe notchers filing or milling pipes has become a thing of the past.The major benefit of this pipe notcher, compared to other notchers, is that one unit can be used to notch a series of diameters without needing to change parts for each diameter.All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are available immediately, ideal for double corner joints.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 1063 €: 1 1/4 42,4, 1 1/2 48,3 mm: 3 mm: 2.5 mm: 15 kgThe AL 3 can be used to notch pipes with an external diameter of 42.4 mm (1 1/4”) and Ø48.3 mm (1 1/2”).ALMI products are subjected to stringent quality control inspections before they leave the factory.ALMI’s pipe notcher, in contrast to punch-cutting machines with separate auxiliary tools, is always available for immediate use.Moreover, the price is more affordable than the auxiliary tools for punch-cutting machines.All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are available immediately, ideal for double corner joints.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 979 €: 1 1/2 48,3 mm, 2 60,3 m mm: 3 mm: 2.5 mm: 15 kgThe AL 2 can be used to notch pipes with an external diameter of 48.3 mm (1 1/2",) and 60.3 mm (2",).ALMI products are subjected to stringent quality control inspections before they leave the factory.ALMI’s pipe notcher, in contrast to punch-cutting machines with separate auxiliary tools, is always available for immediate use.Moreover, the price is more affordable than the auxiliary tools for punch-cutting machines.All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are available immediately, ideal for double corner joints.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Pallet completo. Amplificatore di pressione Stark Record 099-340/804-412, inclusi portautensili SK-40 e componenti di clamp Auction-ID: A1-49000-18
tube diameter: 406.4 - 1625.6 mmwall strength: 9 - 60 mmbending radius min.: - mmpressure: 10000 ttube: 8000 - 12000 / 16000 mmPlate thickness: 9 - 60 mmdistance between columns: mmcontrol: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe HYUNDAI-WIA JCO Press Bending Machine is a heavy-duty industrial hydraulic pressused to form large-diameter, longitudinally seam-welded (LSAW) steel pipes.Sequential Shaping: The machine bends a flat steel plate step-by-step into a pipe shape.It first presses the edges into a J shape, then curves them further into a C shape, and finally closes them into an O shape• Year of Modernization: 2025 1. Edge Milling Machine2. Pre Bending Machine3. In Feeder4. JCO Press Bending Machine5. Tack Welding Machne6. Insdie Welding Machine7. Outside Welding Machine8. 4-way (Inpending) Machine9. End Facing MachineThe data ...
Macchina per piegatura idraulica 400 kg Auction-ID: A1-48648-41
work piece width: max 145 x 150 mmband speed: 1.0 - 8.0 m/minworkpiece height: max. 100 mmtotal power requirement: ca. 5.5 kWweight of the machine ca.: 900 kg.dimensions of the machine ca.: 1560 x 870 x 1920 mmWide-Band Sander for Deburring and Rounding of Laser-Cut Parts - Includes Vacuum Work Table Description Technical Specifications: - Working width: 150 mm- Maximum workpiece height: 100 mm- Max. height adjustment: 100 mm- Complete finishing in a single pass - 1 grinding wheel - 2 disc brushes- Pressure rollers in front of and behind each unit - Adjustable feed speed- Fixed table, constant feed height - Vacuum table- Pressure of the brushes and grinding wheels adjustable . without opening the hoodINCLUDED: DD UNIT: GRINDING WHEEL FOR DEBURRING - Working width: 150 mm- Motor power: 1.1 kW - Grinding wheel diameter: 250 mm INCLUDED: 2PTB UNIT: DISC BRUSHES FOR EDGE ROUNDING - Unit ...
Macchina per piegatura dei tubi inclusi stampi Capacità fino a 1 tonnellata Auction-ID: A3-46152-19418
Specifiche: modello B-500, 230 V, 1.400 W, 6,5 A, 950 giri/min, 50/60 Hz. Auction-ID: A1-41279-420
equipaggiata con un cric idraulico 5x; inclusa unità idraulica; controllo dei piedi; montata su telaio in acciaio a profilo; dimensione del tavolo piegatore: 1100x900x1100 mm; dimensioni di trasporto approssimativamente 1600x900x1300 mm; Auction-ID: A1-49001-20
Include vari accessori. Auction-ID: A1-41279-408
montata su telaio in acciaio a profilo; inclusa unità idraulica; inclusi accessori; Auction-ID: A1-49001-51
Estensione: 580mm, inclusi gli strumenti per la perforazione Auction-ID: A1-49001-12
Include vari accessori. Auction-ID: A1-41279-418
Flessione a freddo: acciaio piatto 100 x 5 mm, acciaio quadrato 16 x 16 mm, acciaio rotondo 18 mm, acciaio angolare 60 x 8 mm - Flessione a caldo: acciaio piatto 100 x 15 mm, acciaio quadrato 30 x 30 mm, acciaio rotondo 30 mm, acciaio angolato 100 x 12 mm, equipaggiato con dispositivo eccentrico di serratura rapida, angolo di flessione leggibile fino a 120 gradi, fermo angolare, leva e template di piegatura, fermo materiale, consegnato nella confezione originale Auction-ID: A1-48552-139
sheet width: 1020 mmplate thickness: 2,00 mmdistance between columns: mmtotal power requirement: kWweight of the machine ca.: 0,40 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1200 mmy-travel: 600 mmz-travel: 600 mmControl: Heidenhain iTNC 530 spindle speed:: 6000 1/min.spindle taper: CAT-50 ISOspindle drive: (S1) 10 kWtable surface area: 1300 x 600 mmtable load: 1200 kgfeed speeds: 1-10000 mm/minrapid travel x/y/z: 20/20/15 m/mindistance table - lower edge spindle: 125-725 mmtotal power requirement: 25 kVAweight of the machine ca.: 7,5 tdimensions of machine: 3600 x 2300 x 3000 mmEquipped with: CNC control Heidenhain iTNC 530 Electr. portable handwheel Spindle oil cooler Tool changer 24-pos., double arm changer- Max. tool diameter 80/150 mm- Max. tool length 250 mm- Max. tool weight 8 kg Preparation for hydraulic machine vice Preparation for 3-D measuring probes Chip conveyor Coolant system, coolant through spindle 20 bar Machine documentationWorking hours (date 29. July 2026):- Control on: 60.822 h- Machine on: 59.602 h- Program cycle: 22.283 h- Sp ...
cutting length: 2500 mmplate thickness: 3 mmdistance between columns: 2050 mmblade length: 2650 mmtotal power requirement: 3 kWweight of the machine ca.: 2,5 t- The scissors are equipped with an adjustable stop on the back. stop. Each side is equipped with a millimetre counter, so that the guarantee that the cuts are true to size.- Spring-loaded automatic hold-downs prevent the material from shifting during the cutting process. material during the cutting process.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 6080 mmplate thickness: 6.0 mmrear stop: 1000 mmcutting angle: 0.5 - 2.0 °down holder: 29 Stkno. of strokes: ca. 10 Hub/mintotal power requirement: 22.0 kWdimensions of the machine ca.: 7300 x 2150 x 2750 mmweight: 25500 kg Current list price: approx. 150.000 eurosFeatures:- Electro-hydraulic, slide-guided sheet metal shear- Electro-hydraulic cutting angle adjustment- Electro-hydraulic cutting gap adjustment- Electrically driven backgauge with ball screws- Manual central lubrication- Cut line illumination- Ball bearings in the table- Fold-up finger guard, 1.000 mm- Side stop with T-slots, tilting stop, and scale- 5 support arms with T-slots- Photoelectric sensors on the rear of the machine- 1 freely movable foot switch Includes optional equipment:- Pneumatic sheet metal holding deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Secondo le foto, peso stimato Auction-ID: A1-48554-156
Pressa oleodinamica per climpatura tubi oleodinamici, dotata di tutte le matrici necessarie per tubi da 0.5 a 50 mm, mai usata 0 ore ed imballata in cassa di legno Ingombro: 1000 x 1000 x 1400 mm Peso: 310 kg Auction-ID: A7-49514-228
Pressa oleodinamica per climpatura tubi oleodinamici, dotata di tutte le matrici necessarie per tubi da 0. 5 a 50 mm, mai usata 0 ore, imballata in cassa di legno Ingombro: 1000 x 1000 x 1400 mm Peso: 310 kg Auction-ID: A7-49514-26
: neu : ca. 8 Wochen ab Auftragse : Spanien : 11500 €: 220.8 €: 1 : 55 to: 500 mm: 40 x 10 mm: 37 1/min: 5 kW: 1550 mm: 1200 mm: 1950 mm: 1150 kghydraulic drivetable with gaugeuser manual in GERMAN and ENGLISHCNC options on requestWe have a big stock of punches and dies for immediate dispatchWE HAVE MORE THAN 700 REFERENCES!The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: gebraucht : WA0089 : 142 €: 1 : 835 mm: 1 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: gebraucht : WA0013 : 265 €: 1 : 835 mm: 80 mm: 12 mmmint conditionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: gebraucht : WA0052 : 292 €: 1 : 835 mm: 80 mm: 16 mmmint conditionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: gebraucht : WA0053 : 292 €: 835 mm: 80 mm: 16 mmmint conditionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
10 € 
