Cesoie a ghigliottina motorizzato

sheet width: 1050 mmplate thickness: 3.0 mmthickness at Niro-steel: 1.5 mmno. of strokes: 35 Hub/mincutting angle: 2°30 °engine output: 3.0 kWtable height: 810 mmweight of the machine ca.: 1150 kg.range L-W-H: 1300 x 1520 x 1170 mm from a maintenance workshop ()Furnishing:- robust electro-motorized metal sheet shears- manual backgauge- adjustable up to 610 mm, using the handwheel from the back- 1x side stop including mm scale- 2x table sheet metal support arms- Piece counter- freely movable foot switch- rear sheet metal slide- EMERGENCY stop button at the front Machine link:https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machinen o=1008-9325126The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1) Cesoia a ghigliottina meccanica COLGAR mod. 3006 Anno 1997 lunghezza 3050 mm larghezza 32000 mm passaggio tra montanti 250-500 spessore lame affilate 7 mm 2) Cesoia a ghigliottina meccanica COLOGAR mod. CS 1520 Lunghezza= 1550 mm Lunghezza lame = 1580 passaggio tra montanti = 1600 Incavo 250 mm. Capacità di taglio con lame affilate 22 mm. 3) Cesoia a ghigliottina meccanica COLGAR CM 3020 Anno 1997 Lunghezza utile taglio 3050 mm Lunghezza delle lamw 3550 mm Passaggio tra montanti 3465 mm Spessore 22 mm.

sheet width: 2550 mmplate thickness: 4,0 mmdistance between columns: 2600 mmback stop - adjustable: 750 mmno. of strokes: 42 Hub/mincutting angle: 1°30 table width: 450 mmtable height: 800 mmtotal power requirement: 7,5 kWweight of the machine ca.: 3230 kgdimensions of the machine ca.: 3200 x 2300 x 1350 mm Current new price with special accessories ~ 33.000 euros from a maintenance workshop / good condition ()Furnishing:- robust / powerful mechanical guillotine shears- electric backgauge, with ball screws- with DURMA NC control - model D-Touch 7 Control unit with touchscreen function 128 MB internal memory (programming possible) Multilingual (English, Turkish, German) INCH/metric conversion- manual cutting gap adjustment, from the front analogue display of the material thickness- 1x extra long side stop 2.000 mm, with support foot & T-slot- 2x support arms- Ball casters in the support  ...

sheet width: 2540 mmplate thickness: 3.25 mmthroat: 100 mmno. of strokes: 60.0 Hub/minback stop - adjustable: 530 mmvoltage: 400 Vengine output: 7.5 kWweight: 2450 kgrange L-W-H: 3600 x 1000 x 1560 mmFurnishing:- robust electric motorized guillotine shears- stable, front support/work table- Front control panel - including emergency stop button- manual back gauge up to approx. 700 mm- adjustable by handwheel, with analogue mm scale display- 1x front side stops- 3x front support arms- manual cutting gap adjustment- Cut/lift confirmation by foot pedal- 1x freely movable foot switch- rear sheet metal slide- User manual (PDF) Machine link:http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno =1008-9325320The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1050 mmplate thickness: 3,0 mm STcutting angle: 2,0 °stroke max.: 38 p. Min.total power requirement: 5,5 kWweight of the machine ca.: 1690 kg.range L-W-H: 1800 x 1800 x 1250 mm from a maintenance workshop ()Furnishing:- Motorized / electric guillotine shears- manual backgauge, adjustment by hand crank Travel range max. 700 mm with analogue position display (scale) manual adjustment from behind- rear protection- rear sheet metal slide- free-moving footswitchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 605 mmplate thickness: 1.50 mmdistance between columns: 605 mmback stop - adjustable: 300 mmtable width: 605 mmoperating pressure: max 6.0 barwork height max.: 1025 mmwork table:: 605 x 250 weight of the machine ca.: 268 kgdimensions of the machine ca.: 1200 x 950 x 1300 mmFurnishing:- pneumatically driven sheet metal shears- manual backgauge- Pneumatic pressure gauge- 2x side table stops including mm scale- 1x movable table stop- Piece counter- mechanical sheet metal hold-down device- Machine light- freely movable foot switch Machine link:https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machinen o=1008-9325334The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2100 mmplate thickness: 3.0 mmthickness at Niro-steel: 1.5 mmblade length: 2110 mmno. of strokes: 34 Hub/minback stop - adjustable: 1000 mmcutting angle: 1.5 °work height max.: 880 mmControl: DIGI engine output: 6.25 kWweight: 2650 kgrange L-W-H: 2750 x 2350 x 1550 mm Machine from a maintenance workshop maintained condition ()Furnishing:- robust electro-mechanical sheet metal shears- Machine body in a closed design as an all-steel welded construction- heavy / robust drive motor (5.5 KW)- electro-motorized backgauge, including digital control unit Adjustment range max. 1.000 mm Input of target / actual value possible- manual cutting gap adjustment, adjustable from the front- 1x table side stop- Ball rollers in the support table- 1x freely movable foot switch, including EMERGENCY stop button- front finger protection- original instruction manual Machine link:http://mhp.logotec ...

sheet width: 1040 mmplate thickness: 4,0 mmthickness at Niro-steel: 2,5 mmblade length: 1100 mmno. of strokes: ca. 38 Hub/minback stop - adjustable: ca. 500 mmControl: konv. table height: 820 mmNumber of working hours: ca. 610 hengine output: 5,0 kWweight: 2250 kgrange L-W-H: 1650 x 1900 x 1300 mm Machine from a maintenance workshop with only approx. 610 operating hours ()Furnishing:- heavy / robust electro-mechanical sheet metal shears- Machine body in a closed design as an all-steel welded construction- heavy / robust drive motor (5.0 KW)- manual back gauge, adjustable from the rear Adjustment by handwheel, with mm scale- 1x side stop- 2x front support arms with T-slot- manual central lubrication- Operating hours counter- Special accessories: 1x set of LOTZE replacement knives Machine link:http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno =1008-9325309The data for this  ...

sheet width: 1040 mmplate thickness: 2,50 mmno. of strokes: 63 Hub/mincutting angle: 1,66 °column arm: 100 mmtable height: ca. 750 mmtotal power requirement: 3,0 kWweight of the machine ca.: 750 kgrange L-W-H: 1470 x 1550 x 1020 mm Refurbished - shear blades sharpened like New ()Furnishing:- manual backgauge 0-550 mm- with analogue measuring scale and magnifying glass- adjustable in front, by adjusting lever- 1x long side stop 850 mm- free-moving footswitch- Scratch protection on support tableThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2040 mmplate thickness: 2.00 mmthickness at Niro-steel: 1.25 mmno. of strokes: 63 Hub/mincutting angle: 1.10 Gradtable height: 750 mmdistance between columns: 2120 mmback stop - adjustable: 0 - 550 mmcolumn arm: 100 mmControl: manuell engine output: 2.8 kWweight of the machine ca.: 1100 kg.range L-W-H: 2650 x 1980 x 1400 mmFurnishing:- robust / motorized swing-cut guillotine shears- Shatterproof, torsion-free steel welded construction- compact and clear mechanical design- manual backgauge, with analogue position display adjustable from the front Continuous adjustment over the entire travel range Adjustment range 0.0 - 550 mm- Machine side stand with projection .. 100 mm- 1x hold-down bar- 1x long side stop with mm scale- 2x support arms- 1x freely movable foot switch- rear sheet metal slide- Connection cable including plug- original instruction manual Machine link:http://mhp ...

sheet width: 2040 mmplate thickness: 3.0 mmthickness at Niro-steel: 1.5 mmno. of strokes: 50 Hub/mincutting angle: 1.4 Gradtable height: 750 mmdistance between columns: 2120 mmback stop - adjustable: 1.0 - 550 mmcolumn arm: 100 mmControl: manuell engine output: 5.5 kWweight of the machine ca.: 2050 kg.range L-W-H: 2600 x 1980 x 1400 mmFurnishing:- robust / motorized swing-cut guillotine shears- Shatterproof, torsion-free steel welded construction- compact and clear mechanical design- manual backgauge, with analogue position display adjustable from the front Continuous adjustment over the entire travel range Adjustment range 1.0 - 550 mm- Machine side stand with projection .. 100 mm- manual cutting gap adjustment- 1x hold-down bar- 1x long side stop- 2x support arms- 1x freely movable foot switch- rear sheet metal slide- 2x EMERGENCY stop buttons at the front- Connection cable including p ...

sheet width: 2540 mmplate thickness: 2,0 mmthickness at Niro-steel: 1,25 mmno. of strokes: 34 Hub/mincutting angle: 1,4° table height: 820 mmdistance between columns: 2600 mmControl: konv. engine output: 4,0 kWweight of the machine ca.: 1330 kg.range L-W-H: 2892 x 1865 x 1430 mmFurnishing:- robust / motorized swing-cut guillotine shears- Shatterproof, torsion-free steel welded construction- compact and clear mechanical design- All-steel knife, double-edged- 1x hold-down bar- Support/work table with 10 mm gaps- extended, extendable support table- freely movable foot switch- Operation manual Special accessories included:- electro-motorized back gauge with analogue position display Fine adjustment via handwheel at the front- Sheet metal holding device for thin sheet metal cuts Machinelink : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9325306The data for this ad  ...

sheet width: 2030 mmplate thickness: 4,0 mmthickness at Niro-steel: 2,5 mmno. of strokes: 34 Hub/mincutting angle: 2,5 Gradtable height: 820 mmdistance between columns: 2340 mmControl: POS 100 back stop - adjustable: max. 750 mmengine output: 6,8 kWweight of the machine ca.: 2860 kg.range L-W-H: 2870 x 2070 x 1400 mm Machine from a maintenance workshop very well maintained condition - hardly used ()Furnishing:- robust / motorized swing-cut guillotine shears- Shatterproof, torsion-free steel welded construction- compact and clear mechanical design- Electric back gauge, with SCHRÖDER POS 100 NC control Digital position display from the backgauge adjustable from the front right with target/actual value input Continuous adjustment over the entire travel range Protection of limit values with limit switches 9-fold programming possible- Duo-Cut drive with two dynamic, powerful geared motors- S ...

sheet width: 2030 mmplate thickness: 4,00 mmthickness at Niro-steel: 2,50 mmno. of strokes: 34 Hub/mincutting angle: 2,5 Gradtable height: 820 mmdistance between columns: 2340 mmControl: POS 100 back stop - adjustable: max. 750 mmengine output: 6,8 kWweight of the machine ca.: 2860 kg.range L-W-H: 2870 x 2070 x 1400 mm Machine from a maintenance workshop very well maintained condition - hardly used ()Furnishing:- robust / motorized swing-cut guillotine shears- Shatterproof, torsion-free steel welded construction- compact and clear mechanical design- Electric back gauge, with SCHRÖDER POS 100 NC control Digital position display from the backgauge adjustable from the front right with target/actual value input Continuous adjustment over the entire travel range Protection of limit values with limit switches 9-fold programming possible- Duo-Cut drive with two dynamic, powerful geared motors- ...

larghezza della lamiera: 2.040 mm spessore della lamiera: 3,0 mm distanza tra le colonne: 2.210 mm arresto posteriore - regolabile: 540 mmtensione: 400 Vpeso della macchina ca.: 2,5 tdimensioni della macchina ca.: 2,50 x 2,10 x 1,25 mpiastra motorizzata Interruttore a pedale - Registro posteriore regolabile

sheet width: 2060 mmplate thickness: 04,0 mmdistance between columns: mmtable width: 455 mmwork height max.: 880 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3060 mmplate thickness: 04,0 mmdistance between columns: mmtable width: 455 mmwork height max.: 880 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

larghezza lamiera: 2000 mm spessore lamiera: 3 mm distanza tra le colonne: 2080 mmpotenza totale richiesta: 5 kWpeso della macchina ca.: 2,5 tdimensioni della macchina ca.: m