Fabbricante:
(Categoria: 709)
Tebel OST-IV Closed cheese vat of 8.000 ltr. Double jacketed for injection of steam or hot water so the temperature of the milk inside the vat can be indirectly adjusted. Stirring, cutting tools, welded to a horizontal shaft. This is driven by a drive unit with frequency converter. During cutting the tools rotate in the opposite direction as during stirring. The coagulum is cut by sharp radial knives of stainless steel. Whey can be drawn off through a perforated pipe (whey suction device). This pipe is lowered into the whey until it is only just immersed. The curd is discharged through the bottom valve. The vat is inclined (4%) toward the bottom valve to facilitate emptying. After a production run the vat is cleaned by four rotating CIP nozzles located in the top. All parts are made of stainless steel AISI 304 except the drive unit. Stainless steel MCC panel at the backside, close to the ...
Tebel OST-IV Closed cheese vat of 8.000 ltr. Double jacketed for injection of steam or hot water so the temperature of the milk inside the vat can be indirectly adjusted. Stirring, cutting tools, welded to a horizontal shaft. This is driven by a drive unit with frequency converter. During cutting the tools rotate in the opposite direction as during stirring. The coagulum is cut by sharp radial knives of stainless steel. Whey can be drawn off through a perforated pipe (whey suction device). This pipe is lowered into the whey until it is only just immersed. The curd is discharged through the bottom valve. The vat is inclined (4%) toward the bottom valve to facilitate emptying. After a production run the vat is cleaned by four rotating CIP nozzles located in the top. All parts are made of stainless steel AISI 304 except the drive unit. Stainless steel MCC panel at the backside, close to the ...
Bactofuge (Bacterial removing separator). Self cleaning. Machine comes with the bowl, motor (37 kW), motor cover, baseframe with feet, manometer on in / outlet, control panel (upgraded by Centrimax with Siemens S7 PLC and CE labelling) and several service tools for maintenance. It was working till the end of the production of the former dairy., Additional features:, Excluding:, - Water valves., - Sludge tank / cyclone., - Counter pressure valve., Type of Machine: Bacterial-Removing Centrifuge (Bactofuge), Capacity: 25.000 liter per hour, Bowl speed: 4.700 rpm, Motor: 37 kW
Bacterial removing separator (Bactofuge). Self cleaning. Machine comes with the bowl, motor (22 kW), desludge cyclone, base plate, feet, CPM-valve for the pressure regulation, control panel (original Alfa Laval) and waterbox (original Alfa Laval)., Additional features: Excluding:, - Service tools for maintenance., Capacity 10.000 - 15.000 liter per hour., Type of Machine: Bactofuge (Bacterial-Removing Centrifuge), Capacity: 15.000 liter per hour, Bowl speed: 5.069 rpm, Motor: 22 kW
Cream separator (Skimmer). Self cleaning. Machine comes with the bowl, motor (11 kW), base plate, feet, control panel, water valves, inlet and outlet pipes and service tools for maintenance., Additional features:, Excluding:, - Motor cover., Type of Machine: Cream Separator / Skimmer, Capacity: 5.000 - 7.000 liter per hour, Bowl speed: 6.520 rpm, Motor: 11 kW - 380 V - 50 Hz - 1460 rpm, Weight: ± 1.300 kg
A 14-head Ishida scale with a display replaced a few years ago is available. Throughput: approx. 80weighings/min, portion range: 10g-500g, deviation: +/-1g, machine dimensions X/Y/Z: approx. 1600mm/1500mm/1900mm, weight: approx. 700kg. An on-site inspection is possible.
An Ishida 14-head multihead weigher is available. Hopper volume: 3l, weighing range: 25g-1000g, max. volume for weighing: 4.5l/single dump, resolution: 0.2g, max. throughput: 90weighments/min, machine diameter: approx. 1360mm, height: approx. 1850mm, weight: approx. 500kg. An on-site inspection is possible.
OASE Restbrotzerkleinerer RZ – Grattapani raffermi Grattapane professionale in vendita da OASE (DIOSNA). La macchina è progettata per la produzione di pangrattato sminuzzando pane raffermo, panini e altri prodotti da forno secchi. La solida costruzione in acciaio inox garantisce molti anni di funzionamento senza problemi. Specifiche: Alimentazione a 400 V potenza circa 3 kW Capacità fino a 600 kg/h Acciaio inossidabile Tramoggia inclinabile Schermi sostituibili (uno) Progettazione mobile su ruote La macchina è in buone condizioni tecniche, ideale per panetterie, dolciumi e stabilimenti di produzione di pangrattato.
Unused Vibration Transducer for a Alfa Laval / Tetra Pak Separator. Article number Alfa Laval: 55215801. Article number Tetra Pak: 6 - 55215801. Original manufacturer for Alfa Laval / Tetra Pak: Brüel & Kjaer Vibro, type VS-068., Type of Machine: Vibration Transduce, Article number Alfa Laval: 55215801, Article number Tetra Pak: 6 - 55215801
A dynamic Novoflow crossflow filtration system with integrated CIP system from the food industry is available. Filter area: 2m², Filter discs: 16, Filter disc material: ceramic, Filter disc diameter: 312mm, Pore size: 0.2µm, Max. operating pressure: 4bar, Max. operating temperature: 60°C, Speed: 450rpm, Process volume: approx. 60l. Machine dimensions X/Y/Z: approx. 1500mm/600mm/1500mm, Weight: approx. 250kg. Documentation available. An on-site inspection is possible.
A Rühle vacuum cooling mixer for the food industry is available. Container volume: 400l, max. filling capacity: 300l, mixing arm speed: 25rpm, lifting aid load capacity: 400kg. Machine dimensions X/Y/Z: approx. 1900mm/2150mm/1650mm, weight: approx. 1500kg. Including an integrated feed and lifting system. Documentation available. An on-site inspection is possible.
The Mac Ewans Centrifugal pump is a pump for use in sanitary applications. Previous used in a Casein plant. Motor: 7,5 kW - 400 V - 50 Hz - 1.465 rpm - 13,9 A. Diameter of the impellor: 180 mm. Connections on the inlet: 3. Connections on the outlet: 2,5. Estimated capacity: ± 30.000 ltr/h., macewans.co.nz/, Type of Machine: Centrifugal pump, Stock Number: 1446, Diameter of the impellor: 180 mm, Motor: 7,5 kW - 400 V - 50 Hz - 1.465 rpm - 13,9 A, Estimated capacity: ± 30 m3/h
An industrial Risco double-shaft paddle mixer from a poultry farm is available. Mixing shafts: 2, nominal bowl capacity: 1300l, max. batch capacity: approx. 1300kg, drive power: 15kW, homogeneity: almost 100%, machine dimensions X/Y/Z: approx. 2600mm/1300mm/1500mm, weight: approx. 1550kg. Including a lifting and tipping device. Documentation available. An on-site inspection is possible.
The Alfa Laval BRPX 213-14S self-cleaning sanitary disc separator for butteroil / AMF, edible fat and dairy applications is previously used in the butter oil industry as a continuous, self-cleaning centrifugal separator that separates molten butterfat at approximately 80–90 °C into butter oil, water phase, and sludge. It is a core machine for producing clear, low-moisture anhydrous milk fat (AMF) / butteroil with high oxidative stability., Machine comes with the bowl, motor (18,5 kW), base plate with feet, water valves, all inlet/outlet pipes with pumps, service tools for maintenance and a big lot of spare parts., Additional features:, Excluding:, - Motor cover., - Control panel., This separator is part of a butteroil production and purification process. The process flow is illustrated in ...
The GEA Westfalia SA 35-01-076 is used in the butter oil industry as a continuous, self-cleaning centrifugal separator that polish the butteroil after the product is concentrated by a concentration separator., Machine comes with the bowl, motor (18,5 kW), base plate with feet, cyclone, water valves, all inlet/outlet pipes with pumps, service tools for maintenance and a big lot of spare parts., Additional features:, Excluding:, - Motor cover., - Control panel., This separator is part of a butteroil production and purification process. The process flow is illustrated in the attached P&IDs and flowcharts., Butterfat is first melted and conditioned in the T100 process. During melting, citric acid is added at a dosage of 0,5 kg per 1.000 kg of butterfat. The melted product is then transferred thro ...
The Alfa Laval CMPX 213 XGP-74/4171-40 self-cleaning sanitary disc separator is used as a recovery and rework separator. Its function is to separate residual fat from the heavy phase, produce clarified wastewater, and recover approximately 10–40% of the fat, which is returned into the reprocessing of the line., Machine comes with the bowl, motor (18,5 kW), base plate with feet, water valves, all inlet/outlet pipes with pumps, service tools for maintenance and a big lot of spare parts., Additional features:, Excluding:, - Motor cover., - Control panel., This separator is part of a butteroil production and purification process. The process flow is illustrated in the attached P&IDs and flowcharts., Butterfat is first melted and conditioned in the T100 proces ...
This Rannie Blue Top 24.60 homogeniser is a 3-cylinder machine which is designed for 700-1.100 liter per hour with a maximum pressure of 400 bar. With the current motor this homogeniser can handle the maximum capacity according the brochure / manual. The homogensier is equipped with 2-stages with manual pressure adjustment wheels. Piston diameter 24 mm. Manometer. Motor: 15 kW - 400 V - 28 Amp - 50 Hz - 1.470 rpm. Stainless steel cladded., Type of Machine: Homogeniser, Capacity: 1.100 liter per hour, Stages: 2 stages, Max. Pressure: 400 bar, Product: Milk, Piston diameter: 24 mm, Motor: 15 kW - 400 V - 28 Amp - 50 Hz - 1.470 rpm, Dimensions: 165 x 80 x 165 cm, Weight: 780 kg
Wolff Turbitherm WUM-120 Universal Machine for the production of processed cheese, convenience products, vegan spreads and confectionery. The bowl is equiped with a double jacket for heating / cooling (maximum pressure 4 bar and maximum temperature 151 °C) , 3x direct steam injection nozzles for direct injection of (culinair) steam inside the product, temperature sensor inside the product, 3x cutting blades, maximum working pressure in the bowl Vacuum / 1 bar (protected with overpressure valve), maximum temperature in the bowl 119 °C, vacuum connection on the bowl, dearation connection on the bowl, mounted on the lid a scraper agitator for the wall, electric driven (1,1 kW - n1: 1.400 rpm - n2: 21 rpm), 5 manual tightening clamps, hydraulic system for tilting the bowl for easy emptying and for easy opening of the lid. Pneumatic outlet valve. Main motor for the cutting knife: 380 V - 50 ...
An industrial Hobart conveyor dishwasher is available. Heating: electric, conveyor width: 612mm, conveyor height: 440mm, working height: 920mm, conveying direction: left-right, total connected load: 81kW, water fill volume: 340l, water pressure range: 1.5bar-10bar, DI water consumption: 220l/h, DI water temperature: 12°C, water hardness: 3°dH, conductivity: 80µS/cm, total machine exhaust air: 1500m³/h. Machine dimensions X/Y/Z: approx. 7550mm/1200mm/2150mm. Documentation available. An on-site inspection is possible.
The APV Cleanline CLP/2/036/20 is a positive displacement rotary lobe pump with sanitary design which can handle dairy products (e.g., yoghurt, quark, curd and butter), foodprocessing, beverage, cosmetics, pharmaceutical and fine chemicals industries. This pump is perfect for managing all kinds of fluid, of either low or high viscosity, as well as for filtering and bottling applications. Products containing fragile solids such as curd can be pumped without damage thanks to the specially designed lobes. Tri-lobe stainless steel lobes / rotors. Nominal displacement: 0,360 liter per revolution. Maximum nominal capacity: 15 m3/h. Inlet connection: 2. Outlet connection: 2. Maximum product pressure: 10 bar. Maximum pump speed: 720 rpm. Maximum temperature: 110 °C. The pump is used in a dairy for product pumping. The current motor with this pump is 4 kW - 1.440 rpm - 220 / 380 V - 50 Hz - 16,3 ...
1 sistema completamente automatico di riempimento e tappo delle tazze per il riempimento Polpette di mozzarella e fette di mozzarella Marchio: GRUNWALD Tipo: ROTATIVO 12.000E/1-/2-corsia Anno di costruzione: 2019 / 2020 Temperatura di riempimento a freddo: riempimento a freddo Formati della coppa: A) Contenitore di plastica rotondo con manico e raccoglitore di erba, 175 x H = 131 mm B) Tazza di plastica rotonda, circa 104 x H 55 o 65 mm C) Contenitore di plastica rotondo con manico e cesto di raccolta, 227 x H 194 mm Coperchio: A+C) Coperchio in plastica scorrevole (chiusura antimanomissione) B) Pezzi di plastica pre-perforati + coperchi scorregibili. Descrizione della macchina: Il GRUNWALD-ROTARY 12.000 è chiaramente e funzionalmente progettato e solidamente costruito. Tutti i dischi sono protetti e facilmente accessibili nel telaio della macchina. Il GRUNWALD-R ...
È disponibile un sistema completo e completamente automatizzato di stoccaggio e miscelazione di serbatoi per la produzione di liquidi non alcolici e non esplosivo. Serbatoi in acciaio inox: 2, volume del serbatoio: 5 m³, volume totale: 10 m³. Attrezzature: celle di carico, pompa dosificante, agitatori, sistema di controllo e sensori di livello. Il sistema ha avuto pochissima funzione ed è quindi in condizioni quasi nuove. Documentazione disponibile. È possibile un'ispezione in loco.
Sistema di dispersione Produttore: IKA Maschinenbau Tipo DISPAX-REATTORE DR 3-13/4 Capacità: massimo 20.000 litri/ora Specifiche tecniche: Dispersore per funzionamento continuo. La pressione massima di erogazione è di 2,5 bar. Motore 18,5 kW, 3.000 giri/min La guarnizione meccanica è collegata all'acqua. Nella camera di dispersione ci sono tre statori e rotori nella gradazione grossolana-media-fine come standard. Questa combinazione può essere variata a desiderio, sia in ordine che nel grado di finezza.
Stephan UM/SK 150 Universal Machine for the production of processed cheese, convenience products, vegan spreads and confectionery. The bowl is equiped with a double jacket for heating / cooling on the jacket, 4x direct steam injection nozzles for direct injection of (culinair) steam inside the product, temperature sensor inside the product, 1x cutting blade, maximum working pressure in the bowl -1 / 0,8 bar, maximum temperature in the bowl 110 °C, vacuum connection on the bowl, mounted on the lid a scraper agitator for the wall, electric driven (1,5 kW - n1: 1.410 rpm - n2: 25 rpm), 2 manual tightening clamp,hydralic cylinder for easy opening the lid, tiltable for emptying the bowl (no pneumatic outlet valve). Main motor for the cutting knife, integrated vacuumpump and a stainless steel control panel with Siemens S5 PLC and Siemens operation panel. Several spare parts included., Type of ...
Cream separator (Skimmer). Self cleaning. Machine comes with the bowl, motor (22 kW), motor cover, base plate with feet, cyclone, water valves (original Westfalia), control panel, all inlet/outlet pipes with pumps, flow indicator, manometer, manual counter pressure valve, service tools for maintenance including pressing tool and some spare parts., Additional features:, Mechanical overhaul done at 83.031 hours in 2022. Bowl overhaul done at 85.478 hours. Last oil change done at 85.996 hours. Current hour meter: 86.374 hours., Type of Machine: Cream Separator / Skimmer, Capacity: 15.000 liter per hour, Bowl speed: 4.500 rpm, Motor: 22 kW - 380 V - 42,5 A - 1.460 rpm - 50 Hz - 3 Ph, Operating hours: 86.374 hours, Year of refurbishing: 2022, Weight: 2.150 kg, Dimensions: 190 x 110 x 220 cm
Macchina a setatura a tumbler utilizzata per frazionare solidi sfusi fini e ultra-fini con alta efficienza di schermatura, per prodotti sensibili e di valore, per la setatura protettiva, la depolverazione e il principio di funzionamento fluido. Diametro: 800 mm. Superficie dello schermo: 0,5 m2. Potenza elettrica nominale: ± 0,75 kW. Questa macchina per setacciatura era precedentemente utilizzata in una latteria in Europa. Tipo di macchina: Macchina per setacciatura, diametro: 800 mm, superficie del setaccio: 0,5 m2, potenza elettrica nominale: ± 0,5 kW - 400 V - 50 Hz
, from the manufacturer (built in 2002) are available for sale, each with a . , totaling approx. 3,534 hl. The tanks are insulated, clad and have three frame cooling zones and cone cooling for precise temperature control. Each tank is designed for a maximum overpressure of 2 bar and can be used at operating temperatures of -10 to 50 °C. The total cooling area is 13.3 m². With a robust stainless steel construction and upright positioning, the tanks are ideal for breweries or beverage manufacturers that require temperature-controlled fermentation and storage processes. Individual sale possible. Our team at VBW Asset Trade will be happy to answer your questions., Additional title: vertical, coolable stainless steel tanks, Gross volume: 58890 l, Max. overpressure: 2 bar, Operating temperature: -10 to 50 °C, Total cooling area: 13,3 m², Length: 3370 mm, Width: 3370 mm, Height: ...
3 serbatoi cilindrici di fermentazione e stoccaggio con raffreddamento a telaio e conico, Titolo aggiuntivo: Serbatoi verticali in acciaio inox con raffreddamento a telaio e a cono, Volume totale: 3000 l, Capacità di pressione: 3 bar, Lunghezza: 1860 mm, Larghezza: 1860 mm, Altezza: 3700 mm, Materiale: acciaio inossidabile, Costruzione della base: piedi in piedi, Caratteristiche: raffreddamento telaio e cono, rubinetto di campionamento, collegamento DN50; pannello con valvole;
3 serbatoi verticali in acciaio inossidabile, ciascuno scaldabile con acqua calda. Precedentemente utilizzati come serbatoi CIP (2 serbatoi alcalini e 1 serbatoio acido), Titolo aggiuntivo: recipiente verticale in acciaio inox riscaldabile, Volume appr.: 1000 l, Larghezza: 1 m, Altezza: 2 m, Peso: 250 kg, Materiale: Acciaio inossidabile, Posizione: autoportante, Costruzione della base: Serbatoio cilindrico con piedi tubolari quadrati su cappucci sferici, Caratteristiche: Coperchio superiore, misurazione della temperatura, Apparecchiature per il riscaldamento con acqua calda
