torni usati in vendita (3,061)

Benzinger TNL NCS1J Tornio Dati della macchina del produttore, deviazioni possibili. Altezza punta: 80 mm lunghezza massima di tornitura 100 mm diametro rotazionale sopra. Letto 220 mm diametro rotazionale sopra. Slitta piatta 140 mm lunghezza massima del percorso in x 300 mm lunghezza massima del percorso in z 240 mm Connessione di rete: 380 V 50 Hz Tutti gli altri dati tecnici sono disponibili nel link. Chiusura completa dell'impianto, ampia selezione di soppalchi, scaffalature portapallet, scaffali, paternosters. Macchine industriali di alta qualità, torni, rettificatrici, macchine manuali

turning diameter: 570 mmturning length: 1000 mmcontrol: Sinumerik 805 Siemensclamping length: ca 1200 mmgreates pass round over bed: 570 mmswing diameter over face slide: 365 mmturning speed range - main spindle: 3 - 2.500 min/-1power capacity - main spindel: 15 / 19 kWspindle bore: 62 mmspindle head: DIN 55027 No. 8diameter of quill: 80 mmtaper of center: MK 5 quill stroke: 190 mmtotal power requirement: 40 kVAweight of the machine ca.: 5,6 tLathe cycle controled- SIEMENS Sinumerik 805 / Simeodrive 611- 4-Jaw Chuck, Handwheel, Covering- Chip Tray & coolant- adjustable feet- approx 20 tool holders2021 Electrics/controls check by BoehringerThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 560 mmturning diameter over slide rest: 355 mmturning length: 1500 mmspindle bore: 80 mmspindle turning speed range: 25 - 1600 U/minturning dia. in gap: 785 mmmetric threading: 0,2 - 14 mmthread - inch: 2 - 112 inch.thread - module: 34 / 0,1 - 7 mmWhitworth-thread: 60 / 2 - 112 TPIadjustment of the upper slide: 140 mmdia. of quill: 130 mmquill stroke: 120 mmtotal power requirement: 7,5 kWweight of the machine ca.: 2,3 tdimensions of the machine ca.: 2,8 x 1,20 x 1,5 mA comprehensive range of quality centre lathes characterised by wide versatility,high accuracy and extremely rigid construction. The machines are well equipped with a multi-fix quick change tool post and 2-axis Newall digital readout fittedas standard and a variable speed option is available. Huvema lathes fullyconform to CE regulations. Also available in: 1,5m3 jaw chuck4 jaw chuckNewall digital  ...

turning diameter: 315 mmturning length: 1000 mmcontrol: Siemens type: Sinumerik 802 Dturning diameter over slide: 160 mmspindle hollow: 52 mmTool changer: 12 turning speeds: 30-3300 U/minchip conveyor: total power requirement: kWweight of the machine ca.: 6 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 850 mmturning length: 2000 mmturning diameter over slide rest: 690 mmcontrol: Siemens type: 840 C Cooling through the spindle: 23 barcentre height: 450 mmspindle diameter in front bearing: 200 mmspindle hollow: 128 mmpower capacity: 60 kWturning speeds: 7-1800 U/minTorque: 7908 Nmworkpiece weight: 4000 kgtailstock quill diameter: 160 mmtailstock quill taper MT: 5 3 jaw chuck Forckrath: 600 mmTool changer: 60 work piece power: 30 kWturning speeds: 56-3000 U/mintotal power requirement: kWweight of the machine ca.: 18 tdimensions of the machine ca.: 6,3x2,4x3,3 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 440 mmturning length: 1500 mmcontrol: C 200 Tool changer: 16 3 jaw chuck Forckrath: 500 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

area di serraggio utensile: 200x55x195 mmpeso: 0,01 t- Portautensili Multifix, 5 pz. come nuovo, 2 pz. meno usato. --- prezzo al ---- pezzo

turning diameter over bed: 320 mmturning diameter over slide rest: 220 mmturning length: 600 mmturning diameter in the gap: 320 mmturning speeds: 60 - 1650 U/mincentre height: 160 mmspindle bore: 38 mmtailstock quill taper MT: 3 MKconnected load frequency: 400 Vtotal power requirement: 1,1 kWweight of the machine ca.: 340 Kgdimensions of the machine ca.: 1,4 x 0,75 x 0,7 mCenter lathe with:3-jaw chuck 160 mm.4-jaw chuck 200 mm.Faceplate 200mmFixed bezelContinuous bezel4-way steel holder.Halogen machine lightChip tray, chip protection wallHardened and ground bed tracksLongitudinal and cross feedComplete coolant systemForage protectionSet of change gearsMachine toolsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 250 mmturning diameter over slide rest: 130 mmturning length: 700 mmturning speeds: 115 - 1620 U/mincentre height: 125 mmspindle bore: 27 mmtailstock quill taper MT: 2 tailstock quill stroke: 40 mmmetric threading: 0,2 - 3,5 mmthread - inch: 8 - 56 inch.thread - module: 0,2 - 12,5 mmswival range +/-: Oberschlitten 45 °connected load frequency: 400 Vtotal power requirement: 0,75 kWweight of the machine ca.: 0,15 tdimensions of the machine ca.: 1,41 x 0,61 x 0,41 mEquipped with- 2-axis digital measuring system with position indicator- manufactured according to DIN 8606- 27 mm spindle passage- adjustable guideways by adjustable strips- Strong engine with 0.75 kW- High resolution of the axis spindles for exact positioningDelivery:3-jaw chuck 100 mm, change gear set, splash guard 3-axisdigital measuring system fully assembled.The data for this ad was created with M ...

turning diameter over bed: 250 mmturning diameter over slide rest: 130 mmturning length: 700 mmturning speeds: 115 - 1620 U/mincentre height: 125 mmspindle bore: 27 mmtailstock quill taper MT: 2 tailstock quill stroke: 40 mmmetric threading: 0,2 - 3,5 mmthread - inch: 8 - 56 inch.thread - module: 0,2 - 12,5 mmswival range +/-: Oberschlitten 45 °connected load frequency: 400 Vtotal power requirement: 0,75 kWweight of the machine ca.: 0,15 tdimensions of the machine ca.: 1,41 x 0,61 x 0,41 mEquipped with- 2-axis digital measuring system with position indicator- manufactured according to DIN 8606- 27 mm spindle passage- adjustable guideways by adjustable strips- Strong engine with 0.75 kW- High resolution of the axis spindles for exact positioningDelivery:3-jaw chuck 100 mm, change gear set, splash guard 3-axisdigital measuring system fully assembled.The data for this ad was created with M ...

turning diameter over bed: 1300 mmturning diameter over slide rest: 900 mmturning length: 8000 mmspindle diameter: 153 mmtotal power requirement: 37 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diametro di tornitura: 300 mmcopertura di tornitura: 1500 mmcontrollo: FanucSystem 6 T potere di potenza totale: kWpeso della macchina ca.: 5 tdimensioni della macchina ca.: 4x2x1,5 m

turning diameter over bed: 1000 mmturning diameter over slide rest: 760 mmturning length: 5000 mmspindle bore: 82 mmturning speeds: 3,55-710 U/minfaceplate: 1000 mm3-jaw chuck: 500 mmsteady: 2 total power requirement: 22 kWweight of the machine ca.: 10 tdimensions of the machine ca.: 8x2x1,8 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle passage: 25 mmturning speeds: 5750 U/minRest: 4 turret head: 8 thread cutting attachment: bar loader: LNZ Hydrobartype: 6.26HS-4.4 total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle passage: 25 mmturning speeds: 5750 U/minRest: 4 straight turning atchm. - working travel: . mmturret head: 8 thread cutting attachment: bar loader: LNZ Hydrobartotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 2000 mmturning diameter over slide rest: 1050 mmturning length: 7000 mmspeed: 1,6 - 250 U/minvoltage: 380 Vtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle passage: 25 mmturning speeds: 5750 U/minRest: 4 straight turning atchm. - working travel: . mmturret head: 8 thread cutting attachment: bar loader: LNZ Hydrobartype: 6.32HS-4.4 total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 400 mmturning length: 600 mmcontrol: swing diameter: 600 mmspindle bore: 73 mmchip conveyor: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle passage: 25 mmturning speeds: 5750 U/minRest: 4 turret head: 8 thread cutting attachment: bar loader: LNZ Hydrobartotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 400 mmturning diameter over slide rest: 235 mmturning length: 1000 mmturning dia. in gap: 560 mmspindle bore: 52 mmspindle taper: Größe 6, DIN 55029 spindle turning speed - stepless: 18 - 2120 U/minfeeds - longitudinal: 0,015 - 0,6 mm/Uface feeds: 0,0075 - 0,3 thread - mm pitch: 0.25 - 7,5 mmthread - inch: 4 - 120 Gang / inch.tailstock quill diameter: 50 mmtailstock quill taper metric: MT 4 tailstock quill stroke: 120 mmmax. workpiece weight between centres: 500 kgvoltage: 400 V / 50 Hzspindle motor: 5,5 kWtotal power requirement: 7,5 kWweight of the machine ca.: 1,85 tdimensions of the machine ca.: 2,9 x 1,2 x 1,5 m• stepless adjustable turning speed via frequency converter, digital display,2-axe-DRO, Made:NEWALLThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 290 mmturning length: 850 mmswing diameter: 600 mmcontrol: Siemens type: 840 D mmspindle passage: 103 mmturning speeds: 3000 U/minlive tooling: 3000 U/minrapid travel - grinding spindle: 25 m/mintotal power requirement: 65 kWweight of the machine ca.: 11 tdimensions of the machine ca.: mOffer price without toolsOptionally, the accessories can also be purchased: 106 steel holders for indoor and outdoor use.External machining, 20driven tools(including 10 x angle tools) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 720 mmturning length: 4000 mmcontrol: Siemens 805 turn - diameter over facing slide: 360 mmspindle diameter: 100 mmspindle passage: 100 mm3-jaw-chuck diameter: 400 mm4-jaw-chuck diameter: 250 mmsteady: 360 mmtotal power requirement: 22 kWweight of the machine ca.: tdimensions of the machine ca.: m3- jaw chuck diameter: 400 mm 4- jaw chuck diameter: 250 mm Fixed bezel diameter: 360 mmIncludes: 4 jaw turrets and coolant.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 2100 mmturning diameter over slide rest: 1300 mmturning length: 6800 mmworkpiece weight: 25000 kgmain drive motor: 140 kWControl: Siemens type: 840 C faceplate: 1100 mmbed width: 2500 mmsteady: 800 mmsteady: 800 mmsteady: 800 mmsteady: 600 mmchip conveyor: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 302 mmturning length: 600 mmcontrol: Siemens type: 810 T tail stock: Tool changer: 12 Pos.tool taper: VDI 30 chip conveyor: 3-jaw-chuck diameter: 200 mmswing diameter: 400 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 460 mmturning diameter over slide rest: 274 mmturning length: 1000 mmturning dia. in gap: 690 mmspindle bore: 58 mmspindle turning speed range: 25-2000 U/minfeeds - longitudinal: 0,031-1,7 mm/Uvoltage: 400 V / 50 Hztotal power requirement: 5,5 kWweight of the machine ca.: 1,8 tdimensions of the machine ca.: 2,3 x 1,0 x 1,5 m• with 3- and 4- jaw chuck,• 2 axis-digital display NEWALL, • fixed and live steady,• Machine light.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 460 mmturning diameter over slide rest: 274 mmturning length: 1500 mmspindle bore: 58 mmspindle turning speed range: 25 - 2000 U/minturning dia. in gap: 690 mmmetric threading: 41 / 0,1 - 14 mmthread - inch: 60 / 2 - 112 inch.thread - module: 34 / 0,1 - 7 mmWhitworth-thread: 60 / 2 - 112 TPIadjustment of the upper slide: 140 mmdia. of quill: 60 mmquill stroke: 120 mmtotal power requirement: 5,5 kWweight of the machine ca.: 1,7 / 2,0 tdimensions of the machine ca.: 2,2 x 1,0 x 1,3 mA comprehensive range of quality centre lathes characterised by wide versatility,high accuracy and extremely rigid construction. The machines are well equipped with a multi-fix quick change tool post and 2-axis Newall digital readout fittedas standard and a variable speed option is available. Huvema lathes fullyconform to CE regulations. Also available in: 1,5m3 jaw chuck4 jaw chuckNe ...

turning diameter over bed: 360 mmturning diameter over slide rest: 220 mmturning length: 1000 mmturning dia. in gap: 515 mmspindle bore: 38 mmspindle turning speed range: 30 - 2200 U/minfeeds - longitudinal: 0,067 - 1,485 mm/Ufeeds - cross: 0,033 - 0,742 mm/Uvoltage: 400 V / 50 Hztotal power requirement: 2,5 kWweight of the machine ca.: 0,75 tdimensions of the machine ca.: 2,3 x 1,0 x 1,5 m• with 3- and 4- jaw chuck,• 2 axis-digital display NEWALL, • fixed and live steady,• Machine light.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 460 mmturning diameter over slide rest: 274 mmturning length: 2000 mmspindle bore: 58 mmspindle turning speed range: 25 - 2000 U/minturning dia. in gap: 690 mmmetric threading: 41 / 0,1 - 14 mmthread - inch: 60 / 2 - 112 inch.thread - module: 34 / 0,1 - 7 mmWhitworth-thread: 60 / 2 - 112 TPIadjustment of the upper slide: 140 mmdia. of quill: 60 mmquill stroke: 120 mmtotal power requirement: 5,5 kWweight of the machine ca.: 1,7 / 2,0 tdimensions of the machine ca.: 2,2 x 1,0 x 1,3 mA comprehensive range of quality centre lathes characterised by wide versatility,high accuracy and extremely rigid construction. The machines are well equipped with a multi-fix quick change tool post and 2-axis Newall digital readout fittedas standard and a variable speed option is available. Huvema lathes fullyconform to CE regulations. Also available in: 1,5m3 jaw chuck4 jaw chuckNe ...

turning diameter over bed: 1090 mmturning diameter over slide rest: 690 mmturning length: 5000 mmspindle bore: 146 mmspindle taper: DIN 55027/15 turning diameter in the gap: 1250 mmbed width: 700 mmquick change tool holder: Größe D1 spindle turning speed range: 3,5 - 1000, stufenlos U/minfeeds - longitudinal: 1-3000 mm/minfeeds - cross: 1-3000 mm/minrapid travel - longitudinal/face: 6000 mm/minthread - mm pitch: 0,5 - 480 mmthread - inch: 60 - 1/16 Gang / inch.thread - module: 0,125 - 120 voltage: 400 V / 50 Hzmain drive: 30 kWControl: total power requirement: 35 KVAweight of the machine ca.: 7,2 tdimensions of the machine ca.: 7,2 x 1,75 x 1,9 m• new heavy duty lathe with infinetely variable rotation speed via frequency converter,• at basic price with normal accessories according to list,• possible special acccessories according to separate make-up.The data for this ad was cre ...

turning diameter over bed: 460 mmturning diameter over slide rest: 274 mmturning length: 1000 mmspindle bore: 58 mmturning dia. in gap: 690 mmspindle taper: Größe 6, DIN 55029 spindle turning speed - stepless: 30 - 2000 U/minfeeds - longitudinal: 0,031 - 1,7 mm/Uthread - mm pitch: 0,1 - 14 mmthread - inch: 2 - 112 Gang / inch.tailstock quill diameter: 60 mmtailstock quill taper metric: MT 4 tailstock quill stroke: 120 mmmax. workpiece weight between centres: 500 kgvoltage: 400 V / 50 Hzspindle motor: 5,5 kWtotal power requirement: 6 kWweight of the machine ca.: 1,8 tdimensions of the machine ca.: 2,9 x 1,2 x 1,5 m• stepless adjustable turning speed via frequency converter, digital display,2-axe-DRO, Made:NEWALLThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.