sottocategorie
(terzo livello di categoria)
Fabbricante:
(Categoria: 102)
Workpiece length: 3000mm, swing over bed/carriage: 800mm/570mm, turning diameter without gap bridge: 1035mm, gap bridge length: 330mm, bed width: 400mm, travel X/Z: 420mm/230mm, max. spindle speed: 1600rpm, spindle bore: 105mm, spindle mount: D1-8, spindle taper: MT5, tailstock taper: MT5, tailstock quill diameter: 90mm, tailstock quill stroke: 235mm, main drive motor power: 7.5kW. Machine dimensions X/Y/Z: approx. 4740mm/1140mm/1910mm, weight: approx. 3870kg. Including measuring system. Documentation available. An on-site inspection is possible.
- Controllo: SIEMENS SINUMERIK 840-C - Asta massima Ø: 65 mm - Asse C - Mandrino principale del piatto girevole: 31 - 6.300 giri/min - Torretta 1: 8 stazioni, di cui 4 sono alimentate - Revolver 2: 8 postazioni, di cui 4 sono alimentate - Velocità applicata Tempo operativo: 4.000 1/min - Entrambe le torrette con raffreddamento interno - Sistema ad alta pressione - Trasportatori a trucioli - Alimentatore a barre IRCO SiMag 65 - Lunghezza massima della biela: 3200 mm Dimensioni LxWxH: - Macchina 3400 x 1700 x 1800 mm - Alimentatore a barre 4000 x 1000 x 1400 mm - Trasportatore a trucioli 3000 x 1100 x 1600 mm Peso totale: circa 6.000 kg
This 5-axis Mazak INTEGREX 200-3 was manufactured in 2004. It features a maximum turning diameter of 660 mm and a maximum turning length of 1045 mm. The machine is equipped with a main spindle speed of 5000 rpm and a milling spindle speed of up to 12000 rpm. If you are looking to get high-quality mill-turn capabilities, consider the Mazak INTEGREX 200-3 machine we have for sale. Contact us for further details.
Horizontal turning machine manufactured in 2008. This MORI SEIKI NL 3000 MC/700 features a maximum turning diameter of 430 mm and a turning length of 713 mm. It includes a 12-station turret for efficient tool changes and operates at a spindle speed of 3000 rpm. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI NL 3000 MC/700 machine we have for sale. Contact us for further details.
Horizontal turning machine manufactured in 2012. This HWACHEON CUTEX 160 B VDI features a swing over bed of 550 mm and a maximum spindle speed of 4500 rpm. It offers travels of 170 mm in the X-axis and 335 mm in the Z-axis, along with 12 tool positions. If you are looking to get high-quality turning capabilities, consider the HWACHEON CUTEX 160 B VDI machine we have for sale. Contact us for further details.
Distance between centers: 1500mm, swing over bed/cross slide: 620mm/400mm, control: Heidenhain ManualPlus 420. The machine has been in daily single-shift operation since 2008. An on-site inspection is possible.
Center height: 200mm, distance between centers: 1000mm, swing over bed/cross slide: 400mm/225mm, spindle bore: 62mm, spindle nose: DIN 55027/6, tailstock taper: MK4, max. spindle speed: 4000rpm, main drive power: 10.5kW, operating hours PLC/motor: 1218h/145h. Machine dimensions X/Y/Z: approx. 2100mm/1080mm/1800mm, weight: approx. 1800kg. An on-site inspection is possible.
This 2022 WEILER E 50 HD X 2000 turning center is equipped with a Siemens Sinumerik 840D sl (WEILER SL2) Controller with 15 TFT. Designed for precision, it offers a max. turning length of 2000 mm and a max. turning diameter of 340 mm, with a swing over bed of 570 mm. The spindle provides 17 / 20 kW power and 1300 Nm torque, with a spindle bore / bar capacity of 83 mm. Featuring 2 (X/Z) controlled axes, it includes a tailstock with 200 mm travel. This machine is in like new condition, with only 720 operating hours. The purchase includes an unused drilling/milling unit specifically for the Weiler E50, making this a highly versatile solution for demanding production tasks.
Key data: 660 mm, 1500 mm
Asse X 580 mm Asse Y 150 mm Asse Z 1.545 mm Asse B -30 a 210 Asse W 1.490 mm Fuso principale Alimentazione di trasmissione 22 kW Velocità massima del mandrino 4.600 giri/min Passaggio massimo alla barre 52 mm Sub-fuso Alimentazione di trasmissione 18,5 kW Velocità massima del mandrino 5.000 giri/min Fuso di fresatura Alimentazione di trasmissione 18,5 kW Velocità massima del mandrino 12.000 giri/min Asse B 0.0001 Interfaccia per alimentatore a barre Raccoglitore di parti Nizzolo trasportatore a trucioli Pompa ad alta pressione da 50 bar Lavorazione simultanea a 5 assi Mandrino di flessione completo sull'asse C Gear Hobbing, Abwalfräsem Fresatura del mandrino sincronizzato Interpolazione dei cilindri Preparazione per più portautensili e portautensili flash 1 pezzo LNS Servo a caricamento rapido 3 caricatore a barra corta
Key data: 380 mm, 1000 mm
Fuso principale Alimentazione di trasmissione 26 kW Velocità massima del mandrino 4000 giri/min Passaggio massimo alla barre 77 mm Naso a fuso A2-8 Revovler Trasmissione della frenatura elettrica 5,5 kW Utensili a velocità massima 4500 giri/min Stazioni degli attrezzi 12 Controllo della matrice di mazatrolo Mandrino principale con asse C completo Misurazione dello strumento Tooleye Trasportatore a trucioli, scarica destra Pompa del liquido refrigerante 15 bar Interfaccia per alimentatore a barre Raccoglitore di parti Retro B-210 a 3 mandibolle Pacchetto portautensili: 7 portautensili fissi + 3 portautensili azionati Marchio CE Documentazione
Key data: 380 mm, 1019 mm
Asse X 234 mm Asse Y 100 mm Asse Z 1090 mm Retro 1075 mm Asse C 360° Alimentazione di trasmissione 26 kW Passaggio massimo alla barre 80 mm Velocità massima 4000 giri/min Numero di posizioni degli utensili 12 Trasmissione della frenatura elettrica 5,5 kW Velocità massima del mandrino 5000 giri/min Stazioni utensili motorizzate 12
Key data: 1160 mm
Potente tornio CNC verticale di HYUNDAI WIA Anno di costruzione 2013 Guida manuale FANUC 32i Diametro massimo di rotazione 1.160 mm Diametro massimo dell'oscillazione 1.355 mm Potenza del mandrino principale fino a 60 kW Coppia massima 6.490 Nm Asse C con risoluzione di 0,001° Torretta utensile BMT85P a 12 marce 12 stazioni utensili motorizzate Renishaw Q-Setter Monitoraggio delle rotture degli utensili Hyundai WIA Sistema di raffreddamento a 20 bar Nastro trasportatore a naziosi incernierati Mandrino da 800 mm a 3 mascelle Seoam CAS 32
Horizontal turning machine manufactured in 2014. This SEIGER SLZ 500E features a center distance of 1500 mm and a swing diameter over the bed of 500 mm. It is equipped with a powerful main drive of 20/25 kW and a maximum spindle torque of approximately 1400 Nm. If you are looking to get high-quality turning capabilities, consider the SEIGER SLZ 500E machine we have for sale. Contact us for further details regarding this machine.
Center height: 225mm, distance between centers: 1000mm, swing over bed/cross slide: 450mm/260mm, spindle bore: 65mm, max. spindle speed: 3000rpm, max. feed rate: 10m/min, tool turret: 4, main motor power: 7.5kW, control: Fanuc 0i Mate TC. Machine dimensions X/Y/Z: approx. 3500mm/1500mm/1700mm, weight: approx. 1550kg, operating hours: approx. 27000h, feed hours: approx. 1329h. Documentation available. An on-site inspection is possible.
Torni PPL 200-225 - Diametro di rotazione sul letto: 400-450 mm - Diametro di rotazione sopra la slitta: 235-285 mm - Offset con il ponte: diametro di rotazione 600-650 mm - Diametro della placca frontale: 350 mm - Larghezza del piano: 320 mm - Potenza motore: 5,5 hp - Affuscio utensile: corsa di 150 mm In buone condizioni, completamente funzionante, può essere visualizzato e provato in loco. Spedizioni anche all'estero. Visione: Fondamentalmente, vorrei sottolineare che l'articolo può essere consultato e testato sotto potere prima dell'acquisto, per escludere malintesi. Per favore, fai domande prima di acquistare per evitare confusione. Se avete domande generali o volete fissare un appuntamento per una visita, posso essere contattato in qualsiasi momento al numero di telefono qui sotto o in alto. Esclusi errori nella descrizione e nella vendita precedente. L' ...
Tornio CNC Produttore: Gildemeister Tipo: CTX 410 V3 Macchina n.: 0136004581 Anno di realizzazione: 2006 Controllo: Siemens 840D ShopTurn Diametro circonferenziale: 505 mm Diametro del mandrino: 210 Passaggio del fuso: 65 mm Potenza di trasmissione: 40/100% ED 21/28 KW Intervallo di velocità da – a: 25-5000 Dimensioni approssimative: 4300x2000x1800 Peso approssimativo: 5600 Kg - Revolver a 12 marce - VDI 40 - Asse C - Utensili elettrici 12 stazioni - Lavorazione a barre di pacchetto, - Trasportatori a trucioli - Retro - SMW Autoblok 210BB - Portautensili azionati 3x assiali - Portautensili azionati 2x radiali - Vari altri portautensili - Nuovo motore per revolver Errori eccezionati
An INDEX CNC lathe with counter spindle and IEMCA bar feeder is offered. Main spindle bore: 65mm, max. spindle speed: 7000rpm, axes: 4, live tooling: possible, tool system: VDI25, spindle operating hours: approx. 80000h, control: Siemens 840D. 2) Bar feeder: IEMCA Master 880/MP 33 L, Year of manufacture: 2004, max. bar length: 3300mm, round bars: 8mm-80mm, hexagonal bars: 7mm-65mm, square bars: 10mm-50mm, max. bar weight: 120kg, min. remnant length: 110mm, bar feeder weight: approx. 1350kg. Including chip conveyor. Machine was continuously maintained. The machine is available from October. Documentation available. Inspection possible by arrangement.
Horizontal turning machine manufactured in 1997. This BOEHRINGER DUC 560/2000 features a maximum turning diameter of 570 mm and a turning length of 2000 mm. It includes an 8-position disc turret and a three-jaw chuck with a diameter of 200 mm. If you are looking to get high-quality turning capabilities, consider the BOEHRINGER DUC 560/2000 machine we have for sale. Contact us for further details.
Horizontal turning machine manufactured in 2017. This KEY EAST BV-40160 features a swing over bed of 1,010 mm and a distance between centers of 4,000 mm. It includes a front and rear chuck diameter of 500 mm, along with a digital readout for enhanced precision. If you are looking to get high-quality turning capabilities, consider the KEY EAST BV-40160 machine we have for sale. Contact us for further details.
Control voltage: 24V DC, rated current: 85A, connected load: 39kVA, rated power: 49kW, control-on operating hours: 32,779h, automatic operation 1: 5,040h, automatic operation 2 operating hours: 1,844h, production time: 33,731h, length: 3231mm, width: 2076mm, height: 1917mm, weight: 4.8t, with documentation, chip conveyor and FMB turbo 8-80 bar feeder. An on-site inspection is possible.
Rated current: 60A, control voltage: 24V, connected load: 33kW, length: 2290mm, width: 1350mm, height: 1630mm, weight: 4.65t, operating hours: 78,439h, with documentation, chip conveyor and bar feeder. An on-site inspection is possible.
Vertical turning machine manufactured in 2007. This EMAG VSC 400 features a turning diameter of 400 mm and a swing diameter of 420 mm. It offers an X-travel of 850 mm and Z-travel of 315 mm, with a maximum spindle speed of 4000 rpm. If you are looking to get high-quality turning capabilities, consider the EMAG VSC 400 machine we have for sale. Contact us for further details regarding this machine.
Horizontal turning machine manufactured in 2001. This EMCO EMCOMAT 200X1000 features a turning length of 1,000 mm and a maximum turning diameter over bed of 400 mm. It is equipped with a Fagor 8055 CNC control unit and includes a SMW AUTOBLOCK wedge-type chuck and a Multifix quick-change tool holder. If you are looking to get high-quality turning capabilities, consider the EMCO EMCOMAT 200X1000 machine we have for sale. Contact us for further details.
Horizontal turning machine manufactured in 1999. This Gildemeister CTX400 Serie2 features a maximum turning diameter of 420 mm and a distance between centers of 600 mm. It includes a disc turret with 12 tool stations and a maximum spindle speed of 5000 rpm. If you are looking to get high-quality turning capabilities, consider the Gildemeister CTX400 Serie2 machine we have for sale. Contact us for further details.
This 5-axis Mazak INTEGREX 200 III S was manufactured in 2004. It features a maximum turning diameter of 660 mm and a maximum workpiece weight of 150 kg. The machine is equipped with a tool magazine capacity of 80 slots and a rapid traverse speed of 38 m/min on the X and Z axes. If you are looking to get high-quality turning and milling capabilities, consider the Mazak INTEGREX 200 III S turn-mill centre we have for sale. Contact us for further details.
Distance between centers: 2000mm, control: Siemens Sinumerik 810, the controls flash memory is currently probably defective, but the parameters can still be accessed. an on-site inspection is possible.
