torni usati in vendita (3,110)

Armadio da officina con accessori per tornio Auction-ID: A1-50076-183

Stile 510x1250 con cambiatore VDI40 Auction-ID: A1-50076-369

Auction-ID: A1-50076-463

già smontato Auction-ID: A1-50076-3

Telaio incluso. Auction-ID: A1-50076-1013

già smontato, incluso mobile con accessori Auction-ID: A1-50076-5

Già smontata Auction-ID: A1-50076-6

Già smontata Auction-ID: A1-50076-10

17x portautensili Parat Auction-ID: A1-50076-251

turning diameter: 540 mmturning length: 1020 mmcontrol: FANUC 18 i-TB swing diameter: mmbar diameter: 65 mmtravel -x axis: 555 / 185 mmtravel -y axis: 160 mmtravel -z axis: 1095 mmtravel -z axis (sub spindle): 1065 mmspindle speed:: 5000 / 5000 1/minspindle bore: 76 / 76 mmC-Axis: 360 x 0,001°/360 x 0,001° turret head: BMT 65P / 12 Pos. milling spindle turning speeds: 10000 U/minDriven Tools: 4.000 U/minb-axis: 240 °rapid traverse X-axis: 24 m/minrapid traverse Z-axis: 24 m/mindrive capacity - spindle motor: 22 / 22 kWvoltage: 400 Vtoolpiece magazine: chain magazine: 40 Pos.tool taper: HSK-A 63 milling drive: 15 kWdriven Tools: 5,5 kWtotal power requirement: 60 kVAweight of the machine ca.: 12,5 tdimensions of the machine ca.: 4,30 x 2,30 x 2,90 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 190 mmturning length: 620 mmcontrol: Fanuc 18 iT max. bar diameter through the spindel: 65 mmnumber of controlled axis: 9 y-axis: +/- 45 mmturning speed range: 4500 U/minpower capacity: 15/11 kWrapid speed: m/minswivelling range: +/- 91 ° Gradnumber of tapers in turret head: 12/24 + 12/24 number of driven tools in turret: 2x 12 Spindel speed of driven tools: 6000 U/minSpindelpower on driven tool: 5,5/3,7 kWtail stock: Gegenspindel/ sub spindle sup spindle: 5000 U/min 11/7,5 kw dimensions: mweight of the machine ca.: 12,5 tCNC- lathe with sub spindle- 2 turrets, universal for main.- or sub- spindle- upper turret switchable- Y- axis on upper turret- both turrets with 12/24 positions- collet chucks on main- and sub spindle- chip conveyor- parts catcher typ A - few toolingsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dreh-Øüber Bett: 400 mmDreh-Øüber Support: 220 mmturning length: 1000 mmspindle turning speed range: 12,5 - 2000 U/minspindle taper: Bajonett 55022 spindle bore: 47 mmfeeds - longitudinal: 0,07 - 4,16 mm/Ufeeds - cross: 0.035 - 2,08 mm/Uthread - mm pitch: 0,87 - 192 mmthread - inch: 2 - 24 Gang/ inch.rapid travel - longitudinal/face: 3,4 / 1,7 m/minspindle drive: 11 kWpower capacity: 13 kWweight of the machine ca.: 2,8 tdimensions of the machine ca.: 2,8 x 1,2 x 1,5 m• 3-jaw chuck Ø 250 mm,• 4-jaw chuck Ø 200 mm,• 2-axis- digital display, ANILAM WIZARD LATHE - retrofitted in 1992The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Passaggio Fuso 120 mm Tre ganasce, forca a mandrino 250mm Multi ix Tipo B Dispositivo di intercettazione Alimentazione elettrica nel supporto superiore Corsa della penna del contrapposto 200mm La macchina fu revisionata elettricamente e meccanicamente e dotata di interruttore di emergenza e protezione per chip di mandrino Da allora la macchina ha funzionato per 5572 ore Accessori: Una volta chiusa Lynette Due portatori centrali Auction-ID: A1-50529-7

turning diameter: 400 mmturning length: 549 mmcontrol: HEIDENHAIN Eltropilot swing over bed: 570 mmtravel -x axis: 220 mmtravel -z axis: 635 mmmain spindle bore: 79 mmmain spindle speed: 25 - 5000 U/minmain spindle drive: 21 kWmax. torque on the spindle: max. 240 Nm: 120 mmc-axis, speed: 100 U/minC-axis: Haltemoment 200 NmC-axis resolution: < 0,04 °sub spindle bore: 56 mmsub spindle speed: 25 - 5000 U/minsub spindle drive: 9 kWmax. torque on the spindle: max. 72 Nm: 90 mmc-axis, speed: 100 U/minC-axis: Haltemoment 150 NmC-axis resolution: < 0,04 °feed power X/Z axis: 3,5 / 7 Nmrapid traverse X-axis: 20 m/minrapid traverse Z-axis: 24 m/mintool turret: 1 x 12 Stationennumber of driven tool stations: 12 speed of driven tools: 4.000 U/mintotal power requirement: 44 kVAAccessories: collet fixture HAINBUCH on main spindle, 3-jaw chuck RÖHM, 140 mmø, on sub spindle,  ...

turning diameter: 3200 mmfaceplate diameter: 2800 mmturning height: 1600 mmControl: Siemens 840 dsl workpiece weight: max. 16.000 kgDimensions (L/W/H): 5.500 x 6.450 x 4.900 mmweight - pallet system: 43.000 kgMax. turning diameter: 3,200 mmTable diameter: 2,800 mmMax. turning height: 1,600 mmMax. workpiece weight: 16,000 kgTable speed: 70 rpmNumber of table speed ranges: ConstantVertical travel, Z-axis (ram stroke): 1,100 mmHorizontal travel, X-axis: 1,720 mmWorking feed range: 2–2,000 mm/minRapid traverse X/Z: 7 m/minCross rail travel speed: 360 mm/minMain motor power: 55 kWTotal installed power: 69 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 500 mmswing dia.: 800 mmturning diameter over bed: 450 mmturning length: 800 mmx-travel: 360 mmz-travel: 980 mmspindle turning speed range: 3200 U/minmax. torque on the spindle: 235/939 Nmspindle bore: 110 mmturret (x-stations): 12 control: Fanuc 31i tailstock quill taper MT: 4 total power requirement: 30 kWweight of the machine ca.: 7,6 tdimensions of the machine ca.: LBH 4,2 x 1,98 x 2,1 m- Machine with C-axis and driven tools- 2 driven tool holders- 10 static tool holders- Incl. SMW 3-jaw chuck 315BB- Measuring arm- Chip conveyor- Incl. additional high-pressure pumpThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 376 mmturning length: 1245 mmcontrol: FANUC i-Series turning diameter over bed: 376 mmx-travel: 230 mmz - travel: 1350 mmrapid travel x/y/z: 24/30 m/minmain spindle speeds:: 2800 spindle motor: 35 / 26 kWmax. torque on the spindle: 1613 Nmspindle passage: 102 mmtotal power requirement: 33,91 Kvaweight of the machine ca.: 7 tdimensions of the machine ca.: 4,6 x 2,11 x 2,3 mEquipped with:- Fanuc i-Series CNC control- C-axis- 3-jaw chuck, 304 mm diameter- 12-station tool turret- Tailstock- Chip conveyor- CEOnly 2,300 spindle hoursThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 900 mmturning length: 1600 mmcontrol: Fanuc 21iTB swing dia.: 1030 mmswing diameter over cross slide guide: 800 mmx-travel: 470 mmz-axis: 1650 mmspindle motor: 37/45 kWspindle turning speed range: 0 - 1800 U/mintransmission ratio: 3 max. torque on the spindle: 5423 NmTurret positions: 12 tailstock quill taper MT: MT6 tailstock quill diameter: 160 mmtailstock quill stroke: 150 mmchucking diameter: 530 mmtotal power requirement: 68,6 kVAweight of the machine ca.: 16,5 tdimensions of the machine ca.: 5,8 x 2,8 x 2,6 m- CNC Control Fanuc 21i-TB- LNS- C-axis 360° (0,001°)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 150 mmy-travel: +/- 30 mmz-travel: 620 mmchucking diameter: 165 mmMain Spindle:: spindle speed:: 6000 U/minspindle motor: 11 / 7,5 kW2nd Spindle:: spindle turning speed range: 6000 U/minspindle motor: 11 / 7,5 kWTurret: 3x 15 Stckc-axis: 0,0001 °y-axis: +/- 25 mmControl: 32i-TB Rapid Travel X / Y / Z-Achse: 24 / 12 / 40 m/mintotal power requirement: kWweight of the machine ca.: 8 tdimensions of the machine ca.: 4120×2130×2815 mHorizontal lathe with main and counter spindles- Muratec Fanuc 32i-TB CNC control- Main and counter spindles-- 2x C-axis- Tool turret (3x) with Y-axis,-- 15 stations each (BMT 44)-- Powered tools on all stations, 8 kW, 6,000 rpm- Finished part gripper- Conveyor belt- Bar feeder interface- Coolant system, separate 200-litre tank- Cooling unit- High pressure to turrets 1–3 via M-function: 15 bar/40 l/min- Chip conveyor- TransformerOnly approx. 500  ...

turning diameter over bed: 2300 mmturning diameter over slide rest: 1100 mmturning length: - mmfaceplate: 2000 mmcentre height: 1180 mmmax. workpiece weight -without tailstock: 4 tspindle diameter in front bearing: - mmspindle turning speed range: 1- 99,9 U/minfeed: 0,06 - 19,98 mm/Urapid traverse: 2,3 m/mintotal power requirement: 37 kWweight of the machine ca.: - tdimensions of the machine ca.: 5,2 x 5,8 x 2,63 mequipped with:- face plate- Bed support with 4-point Tool Holder- Coolant system- Feed/chip guardThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 4500 mmswing diameter: 6000 mmturning height: 3500 mmControl: Siemens 840D distance between columns: 6500 mmcolumn: max. travel: 19000 mmtable load: 63 tonstable rotation speed: 0,63 - 63 U/mincross-rail support horizontal: 7500 m/mincross-rail support vertical: 2500 m/minclamping table: 8000 x 5000 x 350 mmtable load capacity: 25.000 kg/qmram head dimension: 460 x 380 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mGANTRY – Double-column milling and turning centre with movable columnRetrofitted and modernised in 2009- Siemens 840D CNC control- Drilling and milling unit, speeds 25 – 2,500 rpm- Workpiece table 8,000 x 5,000 mm- Rotary table/face plate 4,500 mm- Angular milling headThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 700 mmturning length: 3074 mmcontrol: Mazatrol Matrix Smooth X : 91 mm: JIS A2-11 : 4000 1/minspindle motor: 30 / 22 kWPositioning speed: 12000 1/minmilling spindle drive: 24 / 22 kW: 845 mm: 430 mm: 3126 mm: -30 / +210 °Feeds (X,z,u,w-axis): 360 °: HSK 100 : 36 Rapid Travel X / Y / Z-Achse: 50 / 50 / 40 m/mintailstock quill taper MT: 5 total power requirement: 77,73 kVAweight of the machine ca.: 25,5 tdimensions of the machine ca.: 7,3 x 3,4 x 2,95 m- Mazatrol Smooth X CNC control- 5-axis lathe- 36-position tool changer- IKZ / spindle cooling- Standard tool set (HSK T100) included- C-axis 0.001°- Tailstock- Milling head with milling spindle speed of 12,000 rpm-- B-axis 240° (-30° / +210°)- Smw 5.1 fixed tailstock (range 85–350 mm)- Kitagawa 21 3-jaw chuck- Renishaw RMP60 wireless probe- Engraving function, thread cutting, thread start compensation, tool length  ...

Turning diameter: 920 mmTurning length: 6000 mmControl: Mazatrol Matrix Spindle bore diameter: 170 mmSpindle nose: A2-11 spindle motor: 45/37 kWspindle turning speed range: 35 - 1600 U/minSpindle nose sub spindle: Turning speed sub spindle: 35 - 1600 U/minMovement X-axis: 1025 mmMovement Y-axis: 650 mmMovement Z-axis: 6170 mmw-axis: 4816 mmB-Axis travel: +210 / -30 °C-Axis indexing: 0,0001 °Tool Taper: BT 50 Tools in tool magazine: 80 Milling head speed: 10000 1/minmilling drive: 37 kWtotal power requirement: 120 kVAdimensions of the machine ca.: 13267 x 3,300 x 3,200 mmTotal weight, approx.: 44 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 5000 mmswing diameter: 5500 mmturning height: 3500 mmmax. ram stroke: 1800 mmfaceplate turning speed range: 0,5 - 50 U/minworkpiece weight: 20 tfeed per revolution: 0,056 - 4,25 mmrapid traverse: 2 m/minControl: Sentrol total power requirement: - kWweight of the machine ca.: - t- Sentrol CNC control system- Faceplate- 2 vertical ram supportsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2001 : 010191 : prompt, Zwischenverkauf v : Deutschland : 22100 €: 1 : 320 mm: 650 mm: 160 mm: 40 mm: 192 mm: 205 mm: 5 : 5 MK: 16 : 48 - 2500 1/min: 24 : 0.02 - 0.63 mm/U: 0.006 - 0.2 mm/U: 0.25 - 8 mm: 80 - 2 Gänge/: 0.2 - 4 : 200 - 5 : 150 mm: 100 mm: 40 mm: 3 MK: 85 mm: 2,4 / 3 kW: 1582 mm: 715 mm: 1245 mm: 720 kgHeidenhain 3-axis digital readoutNEWRöhm 3-jaw chuck, 160 mm diameter, with internal and external jawsQuick-change tool post with one rectangular insert and one round insertQuick-release collet chuck with collets from 3 to 30,5 mmLive centreDrill chuckChuck guardLead and feed screw guardMotor brakeCoolant systemMounting feetOperating instructions in German with CE declaration of conformityBUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISEWe offer you maximum security and complete transparency.• HONEST INSIGHTS: Detailed photos and funct ...

turning speeds: 0 - 8.000 U/minhollow: 20 mmcontrol: FANUC - 31i B Turning Automatic Lathe - swiss lathe | ML20C5 - 2016 equipped with chip conveyor.The machine is in a well-maintained condition.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: ML20C5 | ML-20C5 | ML-20 C5 | ML 20 C5The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 590 mmturning length: 1100 mmcontrol: Fanuc turning diameter over bed: 800 mmtotal power requirement: --- kWweight of the machine ca.: 9,5 tdimensions of the machine ca.: --- mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 340 mmturning length: 500 mmswing dia.: 695 mmX-Axis movement: 215 mmY-Axis movement: 100 mmZ-Axis movement: 605 mmMinimum indexing C-Axis main Spindle: 0,0001 °Number of tools on turret: 12 Number of driven tools: 12 xSpindle speed driven tools: 4500 1/minSpindle motor driven tools: 5,5 / 3,7 kWTool type: Mazak VDI control: Mazatrol Smooth G Main Spindle:: Spindle Speed: 4000 1/minspindle motor: 18,5 / 15 kWspindle bore diameter: 80 mm2nd Spindle:: spindle turning speed range: 6000 U/minspindle motor: 7,5 / 5,5 kWspindle bore: 80 mmspindle distance: 605 mmtotal power requirement: 36,7 kVAWeight: - tdimensions of the machine ca.: - m- Mazatrol Smooth EZ- Main and counter spindle- 12-station tool turret with driven tools and Y-axis- 3-jaw chuck-- Main: 10-- Counter: 6- Chip conveyor- Coolant system- Iemca Kid bar feeder (80 mm bar diameter)- 3 colour LED lamp- tool se ...

turning diameter: 600 mmturning length: 1.045 mmcontrol: MSX - 711 III MAPPS IIIswing diameter over support: 600 mmdistance between spindles: 1.255 mmmax. bar capacity: 65 mmMain drive 2: turning speed range - main spindle: max. 5.000 min/-1power capacity - main spindel: 25 / 22 kWno. of turning speeds: 2 spindle nose: JIS A2-6 spindle bore: 73 mminternal diameter: 120 mmC-Axis: 0,0001 °chucking diameter: 200 mmMilling Spindle:: Speed range Tool Spindle: max. 12.000 min/-1Power rating Tool Spindle: 5,5 / 3,7 kWtool taper: Capto C5 internal diameter: 65 mmB - Axis: 0,0001 °swivellable: +/- 120 °axis stroke:: x-axis: 685 (610 + 75) mmy-axis: +/- 125 mmz-axis: 1.075 + 130 mmturret:: number of toolpositions: 12 pos.Shank height for square tool: 20 mmDrill shank diameter: max. 32 mmtool magazin:: tools in tool magazin: 40 pos.max. tool diameter: 70 mmmax. tool-dia with free toolbox:  ...

turning diameter over bed: 1250 mmturning diameter over slide rest: 940 mmturning length: 5000 mmspindle speed:: 1.6 - 315 U/minspindle motor: 75 kWspindle bore: 105 mmtailstock quill diameter: 280 mmquill stroke: 200 mmworkpiece weight: 30 tworkpiece weight max.: 40 tfeed: 0,18 - 160 mm/Uthread - mm pitch: 1 - 192 mmthread - inch: 30 - 1/8 inch.total power requirement: - kWweight of the machine ca.: 38 tdimensions of the machine ca.: 10,7 x 2,2 x 1,9 mFitted with:- DRO- Chuck, 1250 mm diameter- Tailstock- 2 centres- Removable grinding unit- Milling unit with ISOThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.