Fabbricante:
(Categoria: 105)
capacity 90 degrees: round: 310 mmcapacity 90 degrees: square: 280 mm: 400x250 saw band length: 4020x34x1,1 mmband speed: 18 - 100 m/mintable height: 890 mmtotal power requirement: 2,2 kWweight of the machine ca.: 0,99 tdimensions of the machine ca.: 1,85 x 2,2 x 2,0 mMiter band saw, fully automatic, GBS 310/400 VA-I CNC• miter left 45° automatic operation• miter left 60° semi-automatic operation (cuts without programming)• Material height sensor (automatic cut start detection)• Frame and gear made from one piece, very quiet cut and very low vibration• Removable chip tray (disinfection)• Shockproof and ergonomic control panel with oil-resistant EPDM cover• Top access to the saw, material and feed unit• Hinged safety cover• Fine feed adjustment• Semi-auto. Cut!• Optimize work processes with CNC control Possibility to enter various parameters such as quantities an ...
capacità 90 gradi: rotondo: 250 mmcapacità 90 gradi: quadrato: 240 mm: sega lunghezza nastro: 2965 x 27 x 0,9 mmaltezza tavolo: mmvelocità nastro: 37 / 76 m/minpotenza totale richiesta: 1,0 kWpeso della macchina ca.: 0,38 tdimensioni della macchina ca.: 1,0 x 1,6 x 1,4 mdoppia troncatrice sega a nastro
cutting diameter: 360 mmsaw band length: 5050 x 41 x 1,3 mmcutting width: 1,3 mmcutting speed: 15-100 m/mintotal power requirement: 4 kWweight of the machine ca.: 2,8 tdimensions of the machine ca.: 3,0x 2,6 x 2,2 mThe X-SMART 4 is an automatic 2-column band saw suitable for straight cuts in solid materials with a diameter of up to 360 mm.Other features include:4 kW drive motor with 41 mm saw blade widthModern 7 touchscreen CNC controlInclined saw frameSolid 2-column structureLinearly guided material sensorHydraulic cutting pressure regulation500 mm feed unitDouble vise2 vises in front of and 2 vises behind the saw bladeElectrically driven chip conveyorCleaning gunFull enclosureLED work lightMinimum remnant length 100 mmOptionally available:Bundle clamping device, MMS and roller conveyorsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
capacity 90 degrees: round: 125 mmcapacity 90 degrees: square: 125 mm: 127 x 125 mmdimensions of saw-band: 1435 x 12,7 x 0,65 mmband speed: 38 - 80 m/mintotal power requirement: 0,95 kWweight of the machine ca.: 18 kgdimensions: 720 x 380 x 450 mBoth straight and miter cuts can be made at angles between 45 and 90 degrees.With the metal band saw you not only work precisely, but also quickly: the band speed can be variably adjusted between 38 and 80 meters per minute.With a weight of only 25 kilograms, the saw can be used mobile.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
capacity 90 degrees: round: 305 mmcapacity 90 degrees: square: 260 mm: 350x200 saw band length: 3375x27x0,9 mmband speed: 18 - 100 m/mintable height: 880 mmtotal power requirement: 1,5/1,8 kWweight of the machine ca.: 0,84 tdimensions of the machine ca.: 1,85 x 1,9 x 2,0 mDemonstration system for a SPECIAL PRICEFully automatic miter band saw• miter left 45° automatic operation• miter left 60° semi-automatic operation (cuts without programming)• Material height sensor (automatic cut start recognition)• Frame and gear made from one piece, very quiet cut and very low vibration• Removable chip tray (disinfection)• Shockproof and ergonomic control panel with oil-resistant EPDM cover• Top access to the saw, material and feed unit• Hinged safety cover• Fine feed adjustment• Semi-auto. Cut!• Optimize work processes with CNC control Possibility to enter various parameter ...
cutting diameter: 225 mmsaw band length: 2455 mmtable height: 850 mmcutting width: 245 x 150 mmcutting speed: 45/90 m/mindimensions of saw-band: 2480 x 27 x 0,9 mm: 90 mm: 90 mm: 145 mmImpact energy: 145 mmconnected load frequency: 400 Volttotal power requirement: 1,5 kWweight of the machine ca.: 0,2 tdimensions: 1,43 x 0,72 x 1,7 mMiter band saw-Miter cuts up to 60° left-Vice with quick clamping device-Band tension control-Electr. Automatic coolingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 220 mmsaw band length: 2450 x 27 x 0,9 mmtable height: 915 mmband speed: 35 + 70 m/minconnected load frequency: 400 Vcapacity 90 degrees: round: 220 mmcapacity 90 degrees: square: 210 x 210 mmcapacity 90 degrees: flat: 230 x 185 mmtotal power requirement: 1,2 kWweight of the machine ca.: 240 kgdimensions of the machine ca.: 870 x 1550 x 1740 mmThe Zimmer Z241/R is a self-lowering saw for miter cuts from 0 ° -60 ° left. After the cut, the machine stays through oneSafety limit switches stand. The reduction is infinitely variableHydraulic system adjustable. The saw arm can be raised after the cutany position. The saw arm remains at the desired positionstand.The Z241 / R has the following features:Hydraulic cylinder, emulsion pump, eccentric tensioner, base, saw band, 400VConnector -16A-The machine is completely assembled and delivered ready for use.The data for this ad w ...
cutting diameter: 300 mmsaw band length: 3320 x 27 x 0,9 mm mmcutting width: 300 mmControl: NC capacity 90 degrees: flat: 330x 260 mmcapacity 90 degrees: square: 260 x 260 mmcapacity 45 degrees: square: 250 mmcapacity 45 degrees: flat: 270 x 200 mmcapacity 60 degrees: round: 180 mmcapacity 60 degrees: square: 170 mmband speed: 15 - 100 m/mintotal power requirement: 2,2 kWweight of the machine ca.: 1,1 tdimensions of the machine ca.: 3,3 x 2,83 x 2,23 mFurnishing:- fully automatic electro-hydraulic band saw with additional semi-automatic, semi-automatic-dynamic and manual operation- Automatic cycle (cuts from 0° to 60° left) - Semi-automatic, semi-automatic-dynamic and manual cycle (cuts from 45° right to 60° left)- Manual or semi-automatic dynamic cycle to make cuts outside of series production can be carried out directly without programming.- Numerically controlled band saw mac ...
saw blade diameter: 350 mmcapacity 90 degrees: round: 120 mmcapacity 90 degrees: square: 105 mmcapacity 90 degrees: flat: 180 x 70 mmcapacity 45 degrees: round: 120 mmcapacity 45 degrees: square: 100 mmcapacity 45 degrees: square: 135 x 60 mmsaw blade turning speeds: 1700 / 3400 U/mintotal power requirement: 1,5/2,2 kWweight of the machine ca.: 0,285 tdimensions: 1,2 x 1,4 x 1,4 mSemi-automatic circular saw for sawing solid and aluminumHollow iron materials and light metal alloys with electro-weldedCarbide toothed washer.Machine for miter cuts from 45° right to 45° left. Through theAlignment along the vertical is possibleSawing operations with the head inclined between 0° and 45° to the left.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
nuova
saw blade diameter: 130 mmcapacity 90 degrees: round: 130 mmcapacity 90 degrees: square: 120 mmcapacity 90 degrees: flat: 180 x 100 mmcapacity 45 degrees: round: 115 mmcapacity 45 degrees: square: 100 mmcapacity 45 degrees: flat: 120 x 100 mmengine: 3,3 / 4,4 KW0: 1400 / 2800 U/minweight of the machine ca.: 1060 kgdimensions: 2,5 x 1,8 x 1,85 mTIGER 402 CNC HR, automatische elektromechanische Vertikalkreissäge für denEinsatz von Hartmetall – Sägeblättern, um Serienschnitte von 45° rechts bis60° links auszuführen.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 220 mmsaw band length: 2455 mmtable height: 850 mmcutting width: 230 mmcutting speed: 35 + 70 m/mindimensions of saw-band: 2455 x 27 x 0,9 mm: 90 mm: 90 mm: 90 x 100 mm: 150 Impact energy: 150 Air consume per blow: 150 x 210 : 220 mmstroke back stop: 210 mmcross-slide: 230 x 185 total power requirement: 1,2 kWweight of the machine ca.: 0,24 tdimensions of the machine ca.: 1,2 x 0,6 x 1,7 mSPECIAL PRICE!-Miter cuts up to 60° left-Cutting speed 35 / 70 m / min.- Vice with quick release device-Carbide saw band guide-Tape tension control-Electr. automatic coolingAuto-Cut-System = 3 step system-Automatic saw frame lowering via the hydraulic cylinder-Infinitely adjustable feed-with limit switch- rapid lowering of the saw frame from the rest position to the workpiece, then switch to normal saw feed-Manual modeShare of freight costs 85 EURThe data for this ad was created with ...
cutting diameter: 220 mmband length: 425 mmcutting lenght max.: 2500 mmtotal power requirement: 0,95 kWweight of the machine ca.: 219 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Wheel diameter: 680 mmsawblade length: 8550 mmSawblade width max.: 1,3 mmCutting height: mmMotor output: 20 kWTable dimensions: 600 x 620 mmFeed speed: m/min.Machine height: mmWeight: 10.000 kgBandsaw horizontal, Precision-Saw for Silicon (Solar industry)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 250 mmcapacity 90 degrees: flat: 280 x 220 mmcapacity 90 degrees: square: 220 x 220 mmvice: 285 mmturning speed range:: 36/72 m/mindimensions of saw-band: 2950x27x0,9 mmtotal power requirement: 1,5 / 1,8 kWweight of the machine ca.: 485 kgdimensions of the machine ca.: 1700 x 1000 x 1800 mmElectro-hydraulic semi-automatic band saw SHARK 282 SXI EVOwith semi-automatic-dynamic, manual function, has a MEP-28 controlfor miter cuts from 45° right to 60° left.Semi-automatic function:At the start of the cycle: - Vice closes and motor starts– Saw head lowers for the cut – Motor switches off – Saw head rises –Vise opens.Semi-automatic dynamic system (manual lowering of the saw band bow up toto the desired position and cycle start via the manual button.)Some features: New centralized control console on an articulated arm to allow the operator can be easily switc ...
capacity 90 degrees: round: 130 mmcapacity 90 degrees: square: 127 x 127 mmdimensions of saw-band: 1140 x 13 x 0,65 mmband speed: max. 144 m/mintotal power requirement: 1,1 kWweight of the machine ca.: 15 kgdimensions: 500 x 300 x 400 mPortable and removable metal band sawSpecial features Powerful with 1100 watts.Including 2 saw bands, work table and integrated LED lighting.With adjustable, variable handle. Light and handy.For universal work in the workshop, on the construction site or for private use.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 280 mmsaw band length: 3320 x 27 x 0,9 mm mmcutting width: 330 mmControl: NC capacity 90 degrees: flat: 330x 260 mmcapacity 90 degrees: square: 260 x 260 mmband speed: 15 - 100 m/mintotal power requirement: 2,2 kWweight of the machine ca.: 1,24 tdimensions of the machine ca.: 3,3 x 2,83 x 2,23 mAttention: special price!•Fully automatic hydraulic band saw•Miter cuts up to 60° left possible•Saw band length: 3650x27x0.9•Single stroke: 600 mm (programmable up to 10m)•Simple touchscreen operation.•Saw arm made of nodular cast iron - robust and stable•Required space 3.4 m²•Footprint 1900mm wide x 1800mm deepThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
diametro della lama: 350 mmcapacità 90 gradi: rotondo: 115 mmcapacità 90 gradi: quadrato: 95 mm: 180 x 95 mmaltezza di lavoro: 925 mmvelocità di rotazione della lama della sega: 15+30+45+90 U/minpotenza totale richiesta: 1,8/2,5 kWpeso della macchina ca.: 0,38 tdimensioni della macchina ca.: 0,8 x 1,0 x 1,85 mSega circolare verticale manuale per tagli obliqui da 60 a sinistra a 45 a destra.
capacity 90 degrees: round: 255 mmcapacity 90 degrees: square: 240 mm: 300 x 180 saw band length: 2.765 x 27 x 0,9 mm mmtable height: 870 mmband speed: 18 - 110 m/minControl: CNC total power requirement: 1,5/1,8 kWweight of the machine ca.: 0,63 tdimensions of the machine ca.: 1,8 x 1,85 x 1,85 mMiter band saw, fully automatic GBS 255 Super VA-I CNC• miter left 45° automatic operation• miter left 60° semi-automatic operation (cuts without programming)• Material height sensor (automatic cut start detection)• Frame and gearbox made from one piece, very quiet cut and very low vibration• Removable chip tray (disinfection)• Shockproof and ergonomic control panel with oil-resistant EPDM cover• High performance positioning with incremental encoder (CNC) c.• Top access to the saw, material and feed unit• Hinged safety cover• Fine feed adjustment• Semi-auto. Cut!• Optim ...
saw blade diameter: 350 mmcapacity 90 degrees: round: 120 mmcapacity 90 degrees: square: 110 mmcapacity 90 degrees: flat: 200x88 mmcapacity 45 degrees: round: 115 mmcapacity 45 degrees: square: 110 mmcapacity 45 degrees: square: 150x80 mmtotal power requirement: 1,5/1,8 kWweight of the machine ca.: 0,22 tdimensions: 0,7 x 0,9 x 1,9 mATTENTION: SPECIAL PRICE! - Miter left/right 45° - head diagonal cuts up to 45° (shifter) - Pneumatic double quick clamping device Vices close when lowering - Ball bearing table - Machine base - Powerful and powerful - High-quality workmanshipThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
diametro della lama della sega: NA mmdiametro di taglio: NA mmcorsa: mmarea di lavoro: 90 mmdiametro del pezzo: 90 x 500 mmavanzamento: 500 mm potenza totale richiesta: kWpeso della macchina ca.: tdimensioni della macchina ca.: m
saw blade diameter: 370 mmcapacity 90 degrees: round: 120 mmcapacity 90 degrees: square: 100 mm: 180x100 mmWorking height: 925 mmsaw blade turning speeds: 17 - 70 U/mintotal power requirement: 3,0 kWweight of the machine ca.: tdimensions of the machine ca.: 1,9 x 1,45 x 2,1 mSPECIAL PRICE!High-performance vertical circular saw Hydropneumatic fully automatic. (20195)· miter left 60° + right 45°· Hydro-pneumatic control of the saw unit· Electro-pneumatic material feed unit· Smooth-running, powerful worm drive with large Transmission ratio, integrated in a stable cast housing for Achieving optimal cutting results· Vice with double clamping arm for low-burr cuts Lateral quick shift when changing the miter· Precision prism guide of the gear head, laterally adjustable· Particularly stable base frame with built-in automatic cooling system· Large chip drawer· Chip remo ...
Diametro di taglio: 250 mmLunghezza del nastro della sega: 0 mmLarghezza di taglio: mmDiametro del pezzo: 150 mmPotenza totale richiesta: kWpeso della macchina ca.: tdimensioni della macchina ca.: mSega a nastro orizzontale
cutting diameter: 250 mmsaw band length: 3150 x 27 x 0,9 mmtable height: 700 mmcutting width: 250 x 320 mmcutting speed: 25 - 90 m/mindimensions of saw-band: 2480 x 27 x 0,9 mm: 120 mm: 120 mm: 190 mmImpact energy: 190 mmconnected load frequency: 400 Volttotal power requirement: 1,5 kWweight of the machine ca.: 0,5 tdimensions: 0,95 x 1,16 x 1,98 mRock-solid band saw for solid material- Double miter cuts up to 60°- AutoCut- Vice with quick clamping device- Belt tension control- Electric automatic cooling system- Material suggestionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 350 mmcapacity 90 degrees: round: 115 mmcapacity 90 degrees: square: 95 mm: 180 x 95 mmWorking height: 925 mmsaw blade turning speeds: 15+30+45+90 U/mintotal power requirement: 1,8/2,5 kWweight of the machine ca.: 0,41 tdimensions of the machine ca.: 0,8 x 1,0 x 1,85 mElectro-pneumatic - semi-automatic vertical circular saw with microProcessor control for miter cuts from 60° left to 45° right. WithLinear guide of the saw head.•new system with head sliding vertically on linear guides Upstream slide rails with recirculating balls.•Double gear set for high transmission performance•4 speeds 15/30/45/90 rpm•Vice opening 190 mm• Stroke of the saw head can be programmed directly from the control panel for adjustment to the cutting material•Pneumatic vertical vice•Saw blade HSS DMO 5 Æ 350x32x2.5 for solid and profile material•Vise with counter-clamping d ...
capacity 90 degrees: round: 110 mmcapacity 90 degrees: flat: 255x160 mmcapacity 90 degrees: square: 210x210 mmcapacity 45 degrees: round: 160 mmcapacity 45 degrees: flat: 165x110 mmcutting range 45 degree right side: square: 150x150 mmcutting speed: 11/13/17/22/26/34 m/minstroke speeds: 50/64/82/100/128/164 Hübe/mindimensions of saw-blade: 400x36x2 mmpower requirement: 1,8 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 500 mm
Lunghezza massima della sega: 5.000 mm Diametro massimo della lama: 500 mm Posizionamento automatico della lunghezza e regolazione motorizzata dell'angolo verso l'interno e verso l'esterno Rulliera mobile Supporto materiale Dispositivo di spruzzatura della quantità minima Peso: 1800 kg
cutting diameter: 240 mmsaw band length: 2910 x 27 x 0,9 mmcutting width: 310 mmtable height: 900 mm: 35 + 75 m/min: 1,1/1,8 kW: 470 kg: 800 x 1720 x 1450 mmManufacturer no. 20437Description:- Miter cuts left 60° and right 45°- Quick-action clamping stick can be moved in the T-slot for quick position changes- Hydraulic brake cylinder- Large ball-bearing turntable for easy miter adjustment (durable)- Chip clearing brush- Machine base with automatic cooling system- Lockable main switch, emergency stop separately- EMC (Electromagnetic Compatibility), UVV- Current consumption display (saw band wear history, tool monitoring)- Automatically more performance with the proven Berg & Schmid 3-stage AutoCutsystemThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Offerta 25091 Indicazioni: - Diametro rotolo 420 mm - Sporgenza 400 mm - Altezza massima di passaggio 280 mm - Dimensioni del tavolo 600 x 600 mm - Il tavolo può essere ruotato su 2 livelli ± 45° e ± 15° - Altezza del tavolo dal pavimento ca. 975 millimetri - Lunghezza lama 3200 - 3400 mm - Velocità continua della lama 10 - 260 m/min - Azionamento 400 V / 0,9 / 1,7 kW - Peso ca. 500 kg - Ingombro ca. L 750 x A 1950 x P 1150 mm
cutting diameter: 260 mmcutting width: 400 mmcapacity 90 degrees: flat: 400 x 260 mmcapacity 90 degrees: square: 260 x 260 mmcapacity 45 degrees: round: 260 mmband speed: 17 - 110 m/minengine output: 3,5 kWdimensions of saw-band: 3830 x 25 x 0,9 mmweight of the machine ca.: 1,3 tdimensions of the machine ca.: 2,1 x 2,0 x 1,6 mHigh-performance fully automatic band saw with- coolant system- documentationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 370x32x3 mm: 15-150 U/minvice: 190 mmcapacity 90 degrees: round: 120 mmcapacity 90 degrees: square: 110 mmcapacity 90 degrees: flat: 180x100 mm: 115 mm: 90 mm: 90x90 mm: 115 mm: 100 mm: 120x100 mm: 115 mm: 100 mm: 120x100 mmtotal power requirement: 5,5 kWweight: 615 kgOverall size: 1400x1400x2000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
WMT GmbH & Co. KG
