Segatrici circolari a caldo

– Lama 400 mm – Doppio taglio obliquo – 4 morse pneumatiche – Sistema Hydrocheck – Coperchio di protezione automatico – Sistema di lubrificazione a nebbia – 1 rulliera 300 cm – 1 rulliera da 300 cm con battuta di lunghezza –Cerbottana –Documentazione – 400V

saw blade diameter: 450 mmcutting diameter: 150 mmstroke: 1300 mmControl: cutting range: 140x140 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 300 mmcutting diameter: 102 mmcapacity 45 degrees: round: 95 mmcutting range rectangle: 140 x 65 mmCapacy 45°: rectangle: 90 x 70 m/min.turning speed range:: 33 + 66 UpMtotal power requirement: 1,1 / 2,0 kWweight of the machine ca.: ca. 200 kgdimensions of the machine ca.: 0,57 x 1,04 x 1,83 mCondition: good: Electric 380 Volt: Base unit: rollbar Double-parallel-clamping stick: Cooling equipment: Electric 380 Volt: Member of the association of German machine tools dealers FDM and machinedealer with own stock of 2500 m².The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 235 mm

usato, funzionale

dimensions of saw-blade: 250 mmcutting range: 80,0 mmcapacity 90 degrees: square: 70 x 70 mmcapacity 45 degrees: round: 80,0 mmcapacity 45 degrees: square: 60 x 60 mmwork height max.: 900 mmsaw blade turning speeds: 20 / 40 U/minengine output: 1400 / 2800 U/min.total power requirement: 1,1 kWweight: 175 kgrange L-W-H: 550 x 950 x 1800 mmFurnishing :- manual cross-cut/cold circular saw- for cutting profiles, pipes, solid materials- manual vice with star handle- including miter adjustment- ergonomic control handle- Pole-changing drive motor- 1x BEWO feed roller conveyor- Coolant device- Machine base Machine link:https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machinen o=1008-9164089The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Eisele LMS 1 Velocità 4000 rpm 380 V 16 A Non testato senza spina Tavolo girevole Vizio

Sega circolare fredda Eisele LMS 2 380 V 16 A 1700 - 3400 giri/min 1 ganascia di serraggio senza bloccaggio

Sega circolare fredda Eisele LMS2 Tensione 380 V 16 A Velocità: 1700 - 3400 rpm Buone condizioni

saw blade diameter: 275 x 2.5 x 40 mmcutting diameter: 90.0 mmcapacity 90 degrees: flat: 140 x 70 mmcapacity 90 degrees: square: 80 x 80 mmcapacity 45 degrees: round: 70.0 mmcapacity 45 degrees: flat: 90 x 80 mmcutting speed: 40 / 80 U/mintotal power requirement: 1.2 / 1.4 kWweight of the machine ca.: 250 kgdimensions of the machine ca.: 900 x 750 x 1450 mm Machine from training workshop (BOSCH company) maintained condition ()Furnishing:- manual cold circular saw- Column-guided saw head- one-sided miter adjustment over mounted turntable Material support table with degrees- mobile machine base- Pole-changing motor (2x cutting speeds)- manual cutting/lifting version- manual material tensioning- 1x circular saw blade- 1x material stop Machine link:http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno =1008-9164093The data for this ad was created with ModulMWS - the software solu ...

Key data: 300 mm

Dalla liquidazione di una società Indicazioni: Eisele VMS 300 Diametro della lama della sega 300 mm Tagli obliqui fino a 60° destra---sinistra 30° possibili Battuta destra + blocco rulli Aree di taglio 90° 120x75mm---45° 80x75mm Tondo 90mm Velocità lama 40/80 m/min Pompa del liquido di raffreddamento Rbeld 380 volt

Sega circolare semiautomatica in ottime condizioni e perfettamente funzionante. Attrezzatura: • Velocità di avanzamento infinitamente variabile • Attuazione alimentazione idropneumatica • Tensione pneumatica del materiale • Dispositivo spray e refrigerante • Cappuccio protettivo electr. bloccato • Regolazione mitra infinitamente variabile 46 macchine per la lavorazione della lamiera per la produzione di condotti d'aria quadrati e rotondi, e.B. Spiro, Twin Seam, RAS, Prinzing, Tormec, Fasti, Hypertherm, Eisele, Dalex, ecc. negli altri nostri display, oltre che su richiesta.

diametro di taglio: 440 mmpeso della macchina ca.: 780 kgmettitore: alimenta:

N° 5230: 1 Gebr. Sega circolare a freddo con cambio aggiuntivo per 4 velocità Fabr. EISELE, Tipo VMS II - S - PV ( Type-No. 421 ), Bauj. 1986 con alimentazione - rulliera circa 2 m Arb.-Ber.: 80-102 /Flach 160x75/82 mm, Potenza motrice: 1,4/1,9 kW Altro: Cambio supplementare 10/20/40/80 min-1 Velocità di taglio 8,5 - 80 m/min Lame 275 - 315 mm Ingombro circa 80 x 90 x 180 cm (più rulliera + stop) Peso circa 400 kg N° 5230: 1 sega circolare a freddo usata con cambio aggiuntivo per 4 velocità VMS II - S - PV ( Tipo N. 421 ), nuovo 1986 con Alimentazione - rulliera ca. 2 m Campo di lavoro: 80-102 /Flat 160x75/82 mm, Motore generale: 1,4/1,9 kW Osservazioni: Cambio ausiliario 10/20/40/80 min-1 Velocità di taglio 8,5 - 80 m/min Lame 275 - 315 mm Fabbisogno di spazio ca. 80 x 90 x 180 cm (più rulliera + recinzione) peso ca. 400 kg

diametro lama sega: 450/500 mm diametro di taglio: mm corsa: mmpotenza totale richiesta: 3,6 kWpeso della macchina ca.: 1130 tdimensioni della macchina ca.: m- Sega circolare - semiautomatica- idraulica

diametro della lama: 800 x 800 x 1500 mmdiametro di taglio: 200 mmcorsa: 150 mmdimensioni della macchina ca.: mpotenza totale richiesta: 3 kWpeso della macchina ca.: t

saw blade diameter: 450 mmcutting diameter: 150 mmcapacity 90 degrees: flat: 400 x 30 mmcapacity 90 degrees: flat: 345 x 70 mmcapacity 90 degrees: square: 140 x 140 mmcapacity 45 degrees: flat: 280 x 30 mmcapacity 45 degrees: flat: 240 x 70 mmstroke: 240 mmsaw blade turning speeds: 6 / 12 / 24 / 48 n/minwork height max.: 1000 mmengine output: 3,0 / 3,6 kWweight of the machine ca.: 1150 kgrange L-W-H: 1000 x 1330 x 1860 mmFurnishing:- electro-hydraulic semi-automatic cold circular saw- EISELE front control panel- robust and stable machine base- continuously adjustable feed speed of the saw blade- front guard / foldable- Drive via worm gear including EISELE rotation compensation”- comfortable miter adjustment in both directions via large turntable- suitable for the use of Ø 400/425/450 saw blades- hydraulic material tension- Pole changer motor for the gear stages- Coolant device- User m ...

dimensions of saw-blade: 350 x Ø 40 x 3 mmcutting range: 120 mmcapacity 90 degrees: square: 100 x 100 mmcapacity 90 degrees: flat: 170 x 100 mmcapacity 45 degrees: round: 120 mmcapacity 45 degrees: square: 95 x 95 mmcapacity 45 degrees: flat: 120 x 100 mmcapacity 60 degrees: round: RE 100 mmcapacity 60 degrees: square: RE 85 x 85 mmcapacity 60 degrees: flat: RE 85 x 100 mmwork height max.: 900 mmsaw blade turning speeds: 17 / 34 U/mincompressed air: 6,0 - 8,0 bartotal power requirement: 1,4 / 1,9 kWweight: 340 kgrange L-W-H: 1010 x 765 x 2175 mmFurnishing :- semi-automatic vertical cold circular saw- Pneumatic quick clamping device- Infinitely adjustable saw blade feed- Convenient miter adjustment- Convenient stroke adjustment of the saw unit via clamping levers- Generously dimensioned gears- with Eisele rotation compensation for a long saw blade service life- Convenient saw blade chang ...

dimensions of saw-blade: Ø 320-350 x 3.0 mmcutting range: 120 mmcapacity 90 degrees: square: 90 x 90 mmcapacity 90 degrees: flat: 200 x 90 mmcapacity 45 degrees: flat: 140 x 90 mmwork height max.: 925 mmsaw blade turning speeds: 17 / 34 U/mincompressed air: 6.0 - 8.0 barengine output: 1400 / 2800 U/min.total power requirement: 2.0 / 2.6 kWweight: 470 kgrange L-W-H: 850 x 900 x 1800 mm Machine from a vocational school (NL) maintained condition ()Furnishing :- semi-automatic vertical cold circular saw- pneumatic material quick-clamping device- Infinitely adjustable saw blade feed- Convenient miter adjustment with fixed stops- Convenient stroke adjustment of the saw unit using a clamping lever- Generously sized gearboxes- with Eisele rotation compensation for long saw blade service life- Convenient saw blade change- High productivity with minimal space requirements (less than 1 m²)- Coola ...

saw blade diameter: 350 x 4,0 x 25,4 mm mmcutting diameter: 120 mmweight of the machine ca.: 150 kgspeeds: 4400 U/minvoltage: 400 Vtotal power requirement: 5,5 kWdimensions of the machine ca.: TBH 1,3 x 1,0 x 1,8 m• Metal cutting saw (with cutting disc 350 x 4.0 x 25.4 mm steel)• Miter cut• Robust commercial and industrial design• Separation area max. 140x90 mm• Cutting disc diameter 350 mm x 4.0 x 25.4 mm• Power machine with (5.5 KW) 5,500 W drive cable,• Includes 3 pieces of cutting discsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Macchina per la segatura circolare fredda Forte con alimentazione a rulli. Il tavolo di perdita e il caricatore del pacchetto non sono disponibili.

saw blade diameter: 1250 mmcutting diameter: 380 mmcutting range: 480x320 mmmotor speeds:: 3000 U/minfeed speeds: 1000 mm/minmain drive motor: 112 kWchip conveyor: cutting speed: 10-265 m/mintotal power requirement: 125 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Capacity: Ø 15 - 100 mmsawing motor: 11 kWsaw speed: 30-130 U / minhydraulic motor: 2,2 kWSaw Feeding Servo: 1,5 KW SiemensMaterial Feeding Motor: 1,5 KW Siemenssaw-blade dia.: Ø360 x T2.6 x 2.25 x 40 mmcutting range min.: 3000 mmcutting range max.: 7000 mmcontrol: Siemens hydraulic: Rexroth Valve coolant: Pulverisiertes Schneidöl required space: 2900 x 7400 mbarrel diameter: mmbarrel diameter: mmSaw speed: rpm /minweight of the machine ca.: 4900 kgGERD WOLFF GLS-160High-performance circular sawFrom 10 to 250 Millimeters round material, within seconds, they cut steal ofall kinds with precision an ease.Equipped with a material feed system and components from Germany, we combinegerman with turkish mechanical engineering.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity: Ø 30 - 160 mmSaw Body: 30 Grad Linear Schlitten sawing motor: 15 kWhydraulic motor: 3 kWSaw Feeding Servo: 1,5 KW SiemensMaterial Feeding Motor: 1,5 KW SiemensSaw speed: 30-120 rpm /minsaw-blade dia.: Ø480 x 2,25 x 2,7 x 50 mmcutting range min.: 1600 mmcutting range max.: 7000 mmcontrol: Siemens hydraulic: Rexroth Valve coolant: Pulverisiertes Schneidöl weight of the machine ca.: 5550 kgrequired space: mGERD WOLFF GLS-160High-performance circular sawFrom 10 to 250 Millimeters round material, within seconds, they cut steal ofall kinds with precision an ease.Equipped with a material feed system and components from Germany, we combinegerman with turkish mechanical engineering.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity: Ø 30 - 160 mmSaw Body: 30 Grad Linear Schlitten sawing motor: 15 kWhydraulic motor: 3 kWSaw Feeding Servo: 1,5 KW SiemensMaterial Feeding Motor: 1,5 KW SiemensSaw speed: 30-120 rpm /minsaw-blade dia.: Ø480 x 2,25 x 2,7 x 50 mmcutting range min.: 1600 mmcutting range max.: 7000 mmcontrol: Siemens hydraulic: Rexroth Valve coolant: Pulverisiertes Schneidöl weight of the machine ca.: 5550 kgrequired space: 3200 x 7600 mEmail us now at kontakt@atmh.deGERD WOLFF GLS-160High-performance circular sawFrom 10 to 250 Millimeters round material, within seconds, they cut steal ofall kinds with precision an ease.Equipped with a material feed system and components from Germany, we combinegerman with turkish mechanical engineering.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity: Ø 140 - 250 mmsawing motor: 30 kWhydraulic motor: 5,5 kWSaw Feeding Servo: 3 KW SiemensMaterial Feeding Motor: 3 KW SiemensSaw speed: 30-80 rpm /minsaw-blade dia.: Ø750 x 3,8 x 3,2 x 80 mmcutting range min.: 1000 mmcutting range max.: 7000 mmcontrol: Siemens hydraulic: Rexroth Valve coolant: Pulverisiertes Schneidöl required space: 3500 x 8000 mmSaw speed: 30-80 rpm / U pro minweight of the machine ca.: 9000 kgGERD WOLFF GLS-250High-performance circular SawFrom 10 to 250 Millimeters round material, within seconds, they cut steal ofall kinds with precision an ease.Equipped with a material feed system and components from Germany, we combine german with turkish mechanical engineering.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity: Ø 140 - 250 mmsawing motor: 30 kWhydraulic motor: 5,5 kWSaw Feeding Servo: 3 KW SiemensMaterial Feeding Motor: 3 KW SiemensSaw speed: 30-80 rpm /minsaw-blade dia.: Ø750 x 3,8 x 3,2 x 80 mmcutting range min.: 1000 mmcutting range max.: 7000 mmcontrol: Siemens hydraulic: Rexroth Valve coolant: Pulverisiertes Schneidöl required space: 3500 x 8000 mmSaw speed: 30-80 rpm / U pro minweight of the machine ca.: 9000 kgGERD WOLFF GLS-250#High-performance circular SawFrom 10 to 250 Millimeters round material, within seconds, they cut steal ofall kinds with precision an ease.Equipped with a material feed system and components from Germany, we combine german with turkish mechanical engineering.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity: Ø 10 - 75 mmsawing motor: 11 kWhydraulic motor: 3 kWSaw Feeding Servo: 1,5 KW SiemensMaterial Feeding Motor: 1,5 KW SiemensSaw speed: 70-160 rpm /minsaw-blade dia.: Ø285 x 2,0 x 1,7 x 32 mmcutting range min.: 1000 mmcutting range max.: 7000 mmcontrol: Siemens hydraulic: Rexroth Valve coolant: Pulverisiertes Schneidöl required space: 2950x6800 mweight of the machine ca.: 3500 kgGERD WOLFF GLS-75High-performance circular sawFrom 10 to 75 Millimeters round material, within seconds, they cut steal of all kinds with precision an ease.Equipped with a material feed system and components from Germany, we combine German with turkish mechanical engineering.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity: Ø 10 - 75 mmsawing motor: 11 kWhydraulic motor: 3 kWSaw Feeding Servo: 1,5 KW SiemensMaterial Feeding Motor: 1,5 KW SiemensSaw speed: 70-160 rpm /minsaw-blade dia.: Ø285 x 2,0 x 1,7 x 32 mmcutting range min.: 1000 mmcutting range max.: 7000 mmcontrol: Siemens hydraulic: Rexroth Valve coolant: Pulverisiertes Schneidöl required space: 2950x6800 mweight of the machine ca.: 3500 kgGERD WOLFF GLS-75#High-performance circular sawFrom 10 to 75 Millimeters round material, within seconds, they cut steal of all kinds with precision an ease.Equipped with a material feed system and components from Germany, we combine German with turkish mechanical engineering.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Qtà 1 Sega in metallo duro della rotaia di seconda mano con unità di perforazione Mfc.: Tipo Heller: TEK001-73-37 Carrozza sega: 610 ? 710 mm Velocità di taglio ? 6 stadi: 63-200 m/min. Area di taglio: altezza del binario fino a: 200 mm di larghezza del binario fino a: 200 mm Velocità di alimentazione: 50 ? 1250 mm/min. Potenza: 50 kW Unità di foratura Qtà 3 Foratura mandrini diametro del foro: 12 ? 40 mm z-stroke: 630 mm tratto z-drill (adj.): 250 mm Corsa per la modifica dell'utensile (adj.): 380 mm Diametro del mandrino trapano: 60 mm Distanza min. dalla fine della rotaia: 33 mm Distanza del mandrino di perforazione - mandrino 1-3: min. 228 mm max. 600mm Forare la distanza del mandrino ? mandrino 1-2: min. 114 mm max. 486 mm Velocità di alimentazione del trapano: 40 ? Potenza del motore 200 mm/min. Gamma rivoluzione: Qtà 9 225 ? 280 ? 350 ? 450 ? 560 ? 710  ...

Key data: 230 mm

- Taglio a mitra: 90 -/+ gradi - Campo di serraggio: 90 mm - Livelli di velocità: 36 / 72 m/min - Diametro lama sega: 230 (max. 250) mm - Potenza totale: 0,75 kW - Peso macchina: 180 kg - Dimensioni (L x P x A): 0,8 x 0,6 x 1,6 m - Condizione: buona Dettagli Mitra, bloccaggio pneumatico automatico

Anno di costruzione 1994 Diametro lama (mm): 400 Velocità di taglio (m/min): 13/26, 10/20,15/30 Potenza motore (kW) 1.7 /2.6 Campo di lavoro intorno a 90 / 45: 130 Campo di lavoro quadrato 90 / 45: 120 / 110 Campo di lavoro acciaio piatto 90 / 45: 305X 40 / 245 x 30 Campo di lavoro in piedi 90 / 45: 120 X 55 Dimensioni LxWxH (mm): 800 x 1070 x 1780 Peso (kg): 820 N° di serie 116 986 Lavori svolti: Cavo sostituito al motore, pompa dell'acqua di raffreddamento e finecorsa nella sala macchine Cilindro di alimentazione appena sigillato Olio della trasmissione sostituito Serbatoio idraulico pulito / olio e filtro sostituiti Interruttore di fine corsa nella sala macchine sostituito Altre impostazioni effettuate

saw blade diameter: Ø 400 mmcutting diameter: 130 mmcapacity 90 degrees: square: 120 x 120 mmcapacity 90 degrees: flat: 315 x 40 mmstroke: 150 mmcutting speed: 10 - 30 m/mintotal power requirement: 1.8 / 2.7 kWweight of the machine ca.: 850 kgrange L-W-H: 1200 x 1000 x 1700 mmFurnishing:- robust cold circular saw with powerful drive- electro-hydraulic metal circular saw - underfloor Underfloor = saw blade delivery from below- electro-hydraulic material hold-down device manual fine feed- Miter adjustment on both sides via large turntable including analogue degree display- continuous feed adjustment of the saw blade- all gears are hardened and ground- entire gearbox runs in an oil bath- all bearing points have rolling bearings- pole-changing motor- Proven guidance of the saw blade in a strong pivot bearing- Discharge roller conveyor including fastening- User manual (PDF) Machine link:- ht ...

saw blade diameter: 400 mmcutting diameter: 130 mmstroke: 150 mmcutting range - square -: 120 x 120 mmcutting range - flat -: 300 x 40 mmcapacity 45 degrees: round: 130 mmcapacity 45 degrees: square: 110 x 110 mmcapacity 45 degrees: flat: 245 x 40 mmmitter cutting - all-position: 90 °cutting speed: 13 / 25 m/mincontrol: minipos 807 total power requirement: 4,3 kWweight of the machine ca.: 850 kgdimensions of machine L x W x H: 1,20 x 1,20 x 1,82 mAccessories: ingoing and outgoing rollertrack each approx. 4000 mm long, NC length stop, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diametro lama sega: 400 mmmitra: . : Kühlung peso della macchina ca.: 1 tnumero: 4 Stück

Lama Ø: 400 mm Campo di taglio a 90° rotondo: 130 mm Campo di taglio a 90° rettangolo: 305 x 40 mm Campo di taglio in mitra a 45° tondo: 130 mm Area di taglio in mitra a 45° rettangolo: 245 x 40 mm Velocità di taglio: 10/20 m/min Motore di azionamento: 380 V, 1,7/2,6 kW Spazio richiesto: 1100 x 1000 x 1900 mm Peso: 700 kg

diametro della lama: 400 mm diametro di taglio: 130 mm corsa: 150 mmvelocità di taglio: 30 - 130 m/minpotenza totale richiesta: 1,5 / 2,6 kWpeso della macchina ca.: 0,55 tdimensioni: 1,2 x 0,8 x 1,7 m

saw blade diameter: 400 mmcutting diameter: 130 mmcapacity 90 degrees: square: 120 x 120 mmcapacity 90 degrees: flat: 220 x 80 mmfeed length: 600 mmfeed length: multiple: 1800 mmcutting speed: 10 / 20 m/minmitre joint cuts -/+ degrees: 60 total power requirement: 5,5 kWweight of the machine ca.: 1,8 tdimensions of machine L x W x H: 2,45 x 1,20 x 2,00 m- mitre cutting +/- 60 ° with DRO -Accessories: coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sega circolare Kaltenbach KKS 450 con sistema di misurazione della lunghezza L-40NC Indicazioni Tipo: Kaltenbach Sistema di misurazione della lunghezza: L-40NC Anno di costruzione: 2005 Tipo sega circolare: KKS 450 H Anno di costruzione: 1998 Lama della sega: 450mm / supporto 50mm Campo di lavoro max (90) 150mm Campo di lavoro quadrato (90) 140x140mm Area di lavoro piatta in acciaio (90) 330x40mm Campo di lavoro in acciaio a U (90) 120x55mm Campo di lavoro Rotondo (90) 150mm Gamma Mitra 0 - 90 0 Dimensioni: LxWxH 1110x1020x2000mm Peso: circa 950kg Descrizione: __________: Sega universale idraulica utilizzata in design semiautomatico con tavola rotante per tagli a mitra: - Bloccaggio, segatura, ritorno, apertura - semplicemente con la semplice pressione di un pulsante - Regolazione dell'altezza di taglio tramite pulsanti - Controllo elettronico user-friendly  ...

Motore sega per sega Kaltenbach KKS 400 Il motore è stato recentemente conservato e la piastra portante anteriore rinnovata. È stato utilizzato come sostituto nella manutenzione. Motore riparato così come nuovo.

Diametro lama sega: 400 mm Capacità di taglio: 130 mm rotondo / 120 x 120 mm quadrato Regolazione sega: 45º sinistra/destra Gradini: 13/17/25 mtr. al minuto Potenza motore principale: 2,7 kW Paese di origine: Germania Peso macchina: 900 kg Macchina LxWxH: 1080 x 900 x 1760 mm

diametro di taglio: 260 mmnumero di serie: 109967 volt: 380 Vfrequenza: 50 Hzpeso della macchina ca.: 500 t

Sistema di misurazione della lunghezza L-40NC adatto per sega circolare Kaltenbach KKS 450 (richiedere separatamente KKS 450) Direttamente dal cliente utilizzato da CH-Oberrohrdorf disponibile.

diametro lama: 380 mm bloccaggiopneumatico: ja peso della macchina ca.: 1,3 t

Tipo di macchina: sega circolare in alluminio Produttore: KALTENBACH Modello: TL 200 Condizione: buona Tipo di offerta: macchina usata Indicazioni: Gamma di taglio: Ø 55 mm, Foglia Ø: 200 mm Tipo di azionamento: el./mech. Guida: 0,75 kW, 400 V Osservazione: portatile Peso: 50 kg La macchina è in buone condizioni e immediatamente pronta per l'uso e può essere visitata e dimostrata con noi. Saremmo lieti se la nostra offerta trovasse il tuo interesse. Salvo errori, modifiche e vendita preventiva.

Sega circolare a freddo usata Numero macchina interna m3331 Produttore Kaltenbach Tipo TL 500 Ma.Numero 14238 Anno di costruzione sconosciuto Peso: circa 350 kg Luogo in cui si trova l'oggetto: 58730 Fröndenberg/Ruhr La macchina può essere visitata e provata sotto potenza. Saremo lieti di inviarvi ulteriori foto via e-mail. È disponibile un carrello elevatore/gru per il carico. La vendita preventiva è riservata. E' possibile esaminare sapientemente gli articoli in vendita in loco. Le questioni specifiche dovrebbero essere chiarite in anticipo. Le informazioni, come i dati tecnici di e.B., le dimensioni, l'anno di costruzione, le condizioni non sono vincolanti e sono state mostrate al meglio delle nostre conoscenze e convinzioni. Gli errori sono quindi riservati. La garanzia / garanzia è esclusa. La merce viene venduta franco sede/magazzino, con trasferime ...

saw blade diameter: 425 mmcutting diameter: 130 / 140 mmcapacity 90 degrees: square: 120 x 120 mmcapacity 90 degrees: flat: 260 x 80 mmcutting speed: 11 / 22 m/mincapacity 45 degrees: flat: 180 x 80 mmcapacity 45 degrees: round: 130 mmcapacity 45 degrees: square: 110 x 110 mmwork height max.: 1050 mmDrive: 1,6 / 2,5 kWweight of the machine ca.: 1160 kgdimensions of the machine ca.: 1,25 x 1,2 x 1,9 mCondition: ready for operation: Video available on our website.: Electric 380 Volt: Cooling equipment: Chip protect bonnet: saw blade: 400 mmSemi-automatic hydr. Miter circular saw machine with miter adjustment via turntable, saw blade comes from below, hydr. Material clamping, stepless feed speed, 1 horizontal vice.Semi-automatic operation means:1. Clamp the material, 2. Saw, 3. Saw blade return, 4. Relax the material.Infeed roller conveyor 2000 mm and discharge roller conveyor with sto ...

saw blade diameter: 315 mmcutting diameter: 95 mmcutting capacity - round: bei 90° / 95 mmcutting capacity - square: 95 x 95 mmcutting capacity - round: bei 45° / mmcutting capacity flat: 140 x 80 mmcutting capacity - square: 45° / mmsaw blade speeds: 33/60 p. min.Drive: 1,3/1,8 kWweight of the machine ca.: 300 kgdimensions of the machine ca.: 700 x 1000 x 2050 mmCondition: ready for operation: Electric 400 Volt: Cooling equipment: Roller conveyor with measuring stop: 3000 mmSemiautomatic: Function as follows: 1. clambing material. 2-hand start: material sawing, 3. material ease. 4. Sawing unit goes back in starting position. Cooling equipment in the base, pneumatic high-speed tensioning arrangement workpiece, durable transmission, vertical guidance in dove tail guidance, mitre cuts of 45° left to 60° right, spare saw blade. Machine ready to be demonstrated - very good condition. ...

saw blade diameter: 400 / 425 x 40 mmcutting diameter: 40 - 180 mmcutting speed: 14/28 m/mincapacity 90 degrees: flat: 260 x 80 mmcapacity 45 degrees: round: 130 mmcapacity 45 degrees: flat: 180 x 80 mmwork height max.: 1050 mmvoltage: 400 Vtotal power requirement: 5,0 kWweight: 1170 kgrange L-W-H: 1230 x 1205 x 1980 mmFurnishing:- semi-automatic underfloor saw- with miter adjustment, swiveling left / right- hydraulic, vertical & horizontal clamping device- large work table- stepless feed from the saw blade- saw blade- machine baseThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 350 mmcutting diameter: 100 mmdimensions of saw-blade: 350 x 2,5 x 32 mmheight of material-table: 900 mmcutting speed: 38/76 m/mincapacity 90 degrees: round: 100 mmcapacity 90 degrees: flat: 170 x 90 mmcapacity 90 degrees: square: 90 x 90 mmcapacity 45 degrees: round: 100 mmcapacity 45 degrees: flat: 125 x 90 mmcapacity 45 degrees: square: 90 x 90 mmcapacity 60 degrees: round: 90,0 mmcapacity 60 degrees: flat: 90 x 90 mmcapacity 60 degrees: square: 90 x 90 mmclamping range: max. 170 mmtotal power requirement: 1,8 / 2,4 kWweight of the machine ca.: 500 kg.dimensions of the machine ca.: 1200 x 600 x 2200 mmThe KASTOradial U 10 is a semi-automatic vertical circular saw with twoCutting speeds and steplessly adjustable saw feed for theuniversal use in workshop and production. The machines stands outthrough precise dovetail guides, robust gears and largecutting area. The ea ...

saw blade diameter: 300x32x2,5 mmcapacity 90 degrees: round: 10-90 mmcapacity 90 degrees: flat: 80x10-80 mm: 10-40 mm: 10-40 mm: 40x10-40 mmcapacity 90 degrees: square: 10-80 mmweight of the machine ca.: 600 kgdimensions of the machine ca.: 2590x1910x1910 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.