Fabbricante:
(Categoria: 105)
saw blade diameter: 350 mmdimensions of saw-blade: 350 x 32 x 2,5 mmcutting diameter: 115 mmcapacity 90 degrees: square: 95 mmcapacity 90 degrees: flat: 180 x 95 mmcapacity 45 degrees: round: rechts & links 110 mmcapacity 45 degrees: square: rechts & links 95 mmcapacity 45 degrees: flat: rechts & links 125 x 95 mmcapacity 60 degrees: round: 90 mmcapacity 60 degrees: square: 80 mmcapacity 60 degrees: flat: 90 x 95 mmcutting speed: 15 - 90 m/mintotal power requirement: 2,5 kWweight of the machine ca.: 400 kgdimensions of the machine ca.: 1000 x 950 x 1800 mm-The powerful, 2-stage gear was specially designed for cuts in solid materialdesigned-The user has a total of 4 blade speeds for optimal adjustmentthe material available-The large bearing rotary table with internal table clamping andPrecision stops at 0/45/60° ensure quick adjustabilitymiter cuts-The vice with quick clamping (optional ...
Saw roller stand, saw roller stand, sawhorse, roller conveyor stand, roller stand-Roller stand: Roller stand for hacksaw, band saw, cold circular saw-Roll height: 445 to 565 mm-Roll: Ø 55 x 270 mm-Dimensions: 370/315/H445 mm-Weight: 22 kg
Lathe spinning tool, roller block, support roller -Support roller: solid design -Roll: Ø 145 mm -Square: 73 x 26 mm, clamping length 180 mm -Number: 2x roller block available -Dimensions: 350/145/85 mm -Weight: 8.4 kg/piece
saw blade diameter: 350 mmcapacity 90 degrees: round: 120 mmcapacity 90 degrees: square: 110 mmcapacity 90 degrees: flat: 200x88 mmcapacity 45 degrees: round: 115 mmcapacity 45 degrees: square: 110 mmcapacity 45 degrees: square: 150x80 mmControl: total power requirement: 1,5/1,8 kWweight of the machine ca.: 0,59 tdimensions: 1,1 x 0,95 x 1,7 mNew machines SPECIAL PRICE includes:- Starter Kit 2- Micro-spraying systemReady for demonstration in our showroomRoller conveyors optionalHydropneumatic fully automatic· Miter Left/Right· Bevel head cuts up to 45° (shifter) a. b.· Pneumatic vertical clamping device· Vice before and after the saw blade for low-burr cuts· Material hold-down roller· Integrated coolant spray device· Swarf suction nozzle on the saw blade protective hood· Single feed 530 mm· Section length min. 4 mm max. 9,999 mmFor profile cuts, the use of our B & S Coolmatic ...
capacity 90 degrees: round: 120 mmcapacity 90 degrees: square: 105 mmcapacity 90 degrees: flat: 200x80 mmCutting area at 45 degrees left: round: 115 mm: 150x80 mmCutting range at 45 degrees right: square: 115 mmCutting range at 45 degrees right: flat: 150x80 mmsaw blade diameter: 350 mmVice opening: 200 mmdimensions: 1100x1000x1700 mmweight: 300 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 15 - 560 mm: 560 x 630 mmdimensions of saw-band: 7.400 x 54 x 1,60 mmControl: KASTO material feed - single: 900 mmmultiple feeding length: max. 9.999 mmcutting length min.: 6,00 mmsawing motor: 5,50 kWcutting speed: 13 - 127 m/minheight of material-table: 700 mmtotal power requirement: 12,00 kWweight of the machine ca.: 6,00 tdimensions of the machine ca.: 3,70 x 2,50 x H2,50 mAutomatic two-column band saw with KASTO Compact Control,frequency-controlled saw band drive, chip conveyor, infeed roller-conveyor electrically driven (6m), 3x roll-conveyor 1mand outfeed roller 2m, Machine can be inspected under power.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
diametro del rullo: 300 mmgola: 450 mmaltezza del tavolo: 480 mmlunghezza del nastro della sega: 3350 mmlarghezza del nastro della sega: 10 mmpotenza totale richiesta: 2,2 kWpeso della macchina ca.: 520 Kgdimensioni della macchina ca.: 1,00 x 0,70 x 1,85 mSega per parti del corpo in lamiera, plastica eccbuona accessibilità della lama della sega, guidata a mano libera. Velocità di taglio regolabile all'infinito fino a 1000 m/minDispositivo di saldatura a nastro IDEAL BS00I dati di questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.
Campo di taglio rotondo: 170 mm Area di taglio rettangolare: 170 x 170 mm Dimensioni della lama: 3000 x 25 x 0,9 mm Velocità del nastro: 150, 355 e 95 m/min Azionamento della sega: 380 V, 0,75 kW kW Ingombro: 1400 x 600 x 800 mm Peso: 340 kg
Sono disponibili un totale di sette seghe circolari per metalli di Kaltenbach e dell'Adige. 1) 4x Kaltenbach. 2) 2x Adige SC 425. 3) 1x Kaltenbach. È possibile effettuare un'ispezione in loco.
diametro del rullo: - mmgola: - mmaltezza del pezzo: - mmpotenza totale richiesta: - kWpeso della macchina ca.: - tdimensioni della macchina ca.: - mI dati di questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.
Hydr.- Mitra a due colonne - Sega a nastro in metallo Indicazioni: - Campo di taglio a 90 Round 360 mm - Rettangolo 600 x 360 mm - Campo di taglio a 45 tondi 320 mm - Regolazione obliqua tramite volantino - Dimensioni della lama 5400 x 38 x 1,3 mm - Velocità incisionale. Regolabile in continuo 19 - 130 m/min - Pressione di taglio regolabile in continuo 0 - 10 m/min -Uno. Bloccaggio del materiale - Preselezione dell'altezza di sollevamento della lama della sega - Dispositivo di raffreddamento a micro spruzzo - Potenza di azionamento totale 400 V / 8 kW - Ingombro ca. L 1800 x A 2000 x P 3250 mm - Peso ca. 2200 kg - Rulliere di alimentazione + scarico ca. 6000 / 8000 millimetri
Offerta 25114 Dati tecnici circa: - Diametro rotolo 500 mm - Sporgenza 500 mm - Altezza massima di passaggio 400 mm - Dimensioni del tavolo 630 x 530 mm - Tavolo girevole 10 / 30 - Altezza del tavolo dal pavimento 950 mm - Lunghezza della lama ca. 3900 millimetri - Larghezza di banda della sega ca. 3 - 25 millimetri - Velocità di taglio (presumibilmente) 81 – 145 – 208 - 267 m/min - Azionamento 400 V / 1,1 kW - Peso ca. 400 kg - Ingombro ca. L 750 x A 2000 x P 1000 mm
Offerta 23426 Indicazioni: - Campo di taglio a 90 circa 420 mm - piatto 635 x 290 mm - Campo di taglio 45 tondo 360 mm - piatto 420 x 300 mm - Dimensioni della lama 5200 x 32 x 1,1 mm - Velocità di taglio in continuo da 18 a 108 m/min - Idr. Sollevamento + abbassamento del telaio della sega - Idr. Morsa per materiale - Pressione di taglio regolabile in continuo 0 - 10 m/min - Potenza di azionamento totale 400 V / 2,2 kW - Dispositivo refrigerante - La macchina è montata sul carrello - Rulliera di alimentazione mot. motorizzato 4000 mm - Rulliera di scarico con battuta dimensionale 6000 mm - Ingombro ca. L 2500 x A 1400 x P 1100 mm - Peso macchina ca. 950 kg - Peso rulliere 2000 kg
Offerta 25101 Indicazioni: - Campo di taglio a 90 circa 400 mm - piatto L 400 x H 400 mm - Area di taglio a 45 piani L 320 x H 320 mm - Area di taglio a 60 piani L 210 x H 320 mm - Altezza del supporto del materiale ca. 700 millimetri - Dimensioni della lama della sega 5090 x 34 x 1,1 mm - Velocità di taglio regolabile in continuo 17 - 90 m/min - idr. Sollevamento: abbassamento del telaio della sega - Pressione di taglio regolabile in continuo 0 - 10 m/min - Potenza di azionamento totale 400 V / 3,5 kW - Dispositivo refrigerante - Alimentatore a rulliera 7000 mm - Scarico – rulliera con battuta + display digitale 4000 mm - Ingombro ca. L 2000 x A 1400 x P 2800 mm - Peso ca. 1200 kg
Offerta 25115 Braccio radiale - Schiffterschnitt - Sega a pendolo Indicazioni: - Diametro lama 400 mm - Velocità lama 3000 giri/min - Altezza di taglio fino a ca. 125 millimetri - Profondità di taglio fino a ca. 600 millimetri - Taglio obliquo regolabile su 2 assi - Dimensioni del tavolo ca. L 800 x P 800 mm - Altezza tavola 920 mm - Azionamento 400 V / 1,5 kW - Ingombro ca. L 800 x A 1900 x P 1100 mm - Peso ca. 200 kg
Offerta 22252 Indicazioni: - Campo di taglio a 90 tondo + quadrato 330 mm - piatto 600 x 320 mm - Taglio obliquo regolabile sinistra/destra 30/45 - Schnittb. a 45 Re + Li rotondo 320 mm - piatto 350 x 320 mm - Altezza del supporto del materiale ca. 920 millimetri - Dimensioni della lama 4440 x 34 x 1,1 mm - Velocità di taglio regolabile in continuo da 10 a 100 m/min - idr. Sollevamento: abbassamento del telaio della sega - Limite superiore della corsa del telaio della sega - Pressione di taglio regolabile in continuo 0 - 10 m/min - idr. Morsa per materiale - Dispositivo refrigerante - Potenza di azionamento totale 400 V / 2,2 kW - Ingombro ca. L 1400 x A 1400 x P 2400 mm - Peso ca. 1000 kg
Key data: 550 mm
Lunghezza massima della sega: 6.000 mm Lunghezza di taglio minima: 335 mm Diametro massimo della lama: 550 mm Posizionamento automatico della lunghezza tramite il comando E 255 Girevole interno ed esterno 22,5° - 90° - 140° Inclinare gli angoli tra 45 e 90 gradi Display angolari digitali Rulliera mobile Dispositivo di spruzzatura della quantità minima
cutting diameter: 240 mmsaw band length: 2730 mmcutting width: 270 mmcutting speed: 37 + 74 m/mindimensions of saw-band: 2730 x 27 x 0,90 mm: 240 mm: 230 mm: 270 x 230 mm: 210 mm: 200 mm: 200 x 210 mm: 130 mm: 130 mm: 130 x 160 mmtotal power requirement: 1,2 kWweight of the machine ca.: 0,3 tdimensions of the machine ca.: 1,6 x 1 x 1,7 mhigh-quality processed metal band saw with 2 band speeds, miter up to60°, automatic cooling and AutoCut feed system - for sawing solid material andprofilesexecution High-quality processed and equipped metal band saw for saw cutsbest quality For sawing solid material and profiles made of steel, stainless steel and aluminium Miter cuts up to 60 degrees left Saw band speed adjustable in 2 stages Frame and gearbox made from one piece, very quiet and low-vibration cut Easy, clear miter adjustment with scale Quick release vice with quick release lever for easy ...
cutting diameter: 220 mmsaw band length: 2450 mmcutting width: 250 mmcutting speed: 40 / 80 m/mindimensions of saw-band: 2450 x 27 x 0,9 mm: 100 mm: 90 mm: 90 x 90 mm: 160 mm: 160 x 110 mm: 250 x 190 mmtotal power requirement: 0,75 / 1,1 kWtable height: 925 mmweight of the machine ca.: 218 kgdimensions of the machine ca.: 1300 x 700 x 1530 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 350 mmdimensions of saw-blade: 350 x 32 x 2,5 mmcutting diameter: 115 mmstroke: 100 mmcapacity 90 degrees: square: 95 mmcapacity 90 degrees: flat: 180 x 95 mmcapacity 45 degrees: round: rechts & links 110 mmcapacity 45 degrees: square: rechts & links 95 mmcapacity 45 degrees: flat: rechts & links 125 x 95 mmcapacity 60 degrees: round: 90 mmcapacity 60 degrees: square: 80 mmcapacity 60 degrees: flat: 90 x 95 mmcutting speed: 15 - 90 m/mintotal power requirement: 2,6 kWweight of the machine ca.: 375 kgdimensions of the machine ca.: 1000 x 950 x 1800 mm-The powerful, 2-stage gear was specially designed for cuts in solid materialdesigned-The user has a total of 4 blade speeds for optimal adjustmentthe material available-The large bearing rotary table with internal table clamping andPrecision stops at 0/45/60° ensure quick adjustabilitymiter cuts-The vice with quick clamp ...
cutting width: 375 mmCutting height: 150 mmdimensions of saw-blade: 500 x 30 mmMotor output: 2 x 3 kWCutting length: 5100 mmspeeds: 2800 U/minair pressure: 6 barweight of the machine ca.: 700 kgdimensions of the machine ca.: 6100 x 1450 x 1450 mm Profile support plate made of steel Stable cast construction of the saw unit Large cutting range, 2 profiles can be cut at the same time Easy adjustment of the moving unit with roller guides Double storage of the swivel device Safe clamping thanks to the two-pressure system Double saw feed guide Hydropneumatic saw feed External dimension correction scale Left saw unit fixed Swivel range 45°-90° Including suction (without piping) ALKO Mobil-Jet 100 year of manufacture 2002The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
roll diameter: 500 mmthroat: 1050 / 485 mmworkpiece height: 300 mmsaw band length: 3920 - 4050 mmcutting speed: 15 - 940 m/mintable height: 1040 mmtable surface area: 750 x 800 mmTable tiltable: 15 Gradtotal power requirement: 4,0 kWweight of the machine ca.: 1750 kgdimensions of the machine ca.: 2100 x 1000 x 2100 mm- Fully automatic miter band saw- MAC 90 control- Saw feed infinitely adjustable via precision throttle- Infinitely adjustable clamping pressure- Infinitely variable speed adjustment of the saw band- hydraulic bundle clamping- chip conveyor- Cooling device- Micro dosing device- Machine lightThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
roll diameter: 800 mmthroat: 765 mmworkpiece height: ? mmtotal power requirement: ? kWweight of the machine ca.: 0,9 tdimensions of the machine ca.: 2 x 1 x 2,6 mNo. 1548Vertical band saw KÖLLE BG-80Working area: Table, tiltable 1200 x 800Passage saw blade machine stand 765 mmIDEAL saw blade welding and grinding deviceRoller diameter 800 mm.Space requirement approx. 2 x 1 x 2.6 mWeight approx. 900 kgmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 275 - 315 mmcutting diameter: 80 - 102 mmstroke: - mmtotal power requirement: 2 kWweight of the machine ca.: 0,4 tdimensions of the machine ca.: 1,5 x 1, 5 x 2 mNo. 5230Cold circular saw with additional gearbox for 4 speedsEISELE VMS II - S - PV ( Typ-Nr. 421 )Additional gearbox 10/20/40/80 min-1Cutting speeds 8.5 - 80 m/minSaw blades Ø 275 - 315 mmSpace requirement approx. 80 x 90 x 180 cm (plus roller conveyor + fence)Weight approx. 400 kgWorking range: Ø 80-102 /flat 160x75/82Drive: 1,4/1,9Feed - roller conveyor approx. 2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
diametro del rotolo: 400 mmgola: 375 mmaltezza del pezzo: ? mmpotenza totale richiesta: kWpeso della macchina ca.: tdimensioni della macchina ca.: mn. 1291Sega a nastro verticale PEHAKA USM-4Campo di lavoro: Passaggio 375Piano del tavolo girevole 600 x 600 mm, Dimensioni della lama della sega: 2900-3040 x 3-12 mmCampo di taglio da 3-180 m/min, Dispositivo di soffiaggio trucioliDispositivo ideale per la saldatura e la rettifica della lama della sega
cutting diameter: 280 mmsaw band length: 3370 mmcutting width: 350 mmdimensions of saw-band: 3370 x 27 x 0,9 mm: 280 mm: 250 mm: 350 x 200 mm: 240 mm: 220 mm: 230 x 220 mm: 170 mm: 150 mm: 170 x 100 mmsaw tape speed: 37 + 74 m/mintotal power requirement: 1,8 kWweight of the machine ca.: 0,6 tdimensions of the machine ca.: 1,5 x 1,7 x 2,0 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 255 mmsaw band length: 2765 x 27 x 0,9 mmtable height: 950 mm: 18-110 m/min: 255 mmcapacity 90 degrees: square: 240 mmcapacity 90 degrees: flat: 300 x 180 mmcapacity 45 degrees: round: 210 mmcapacity 45 degrees: square: 190 mmcapacity 45 degrees: flat: 200 x 160 mmcapacity 60 degrees: round: 135 mmcapacity 60 degrees: square: 110 mmcapacity 60 degrees: flat: 130 x 100 mmcapacity 45 degrees: round: rechts 180 mmcapacity 45 degrees: square: rechts 160 mmcapacity 45 degrees: flat: rechts 180 x 100 mm: 1,5/1,8 kW: 350 kg: 1700 x 900 x 2000 mmManufacturer no. 20437Description:- Miter cuts left 60° and right 45°- Quick-action clamping stick can be moved in the T-slot for quick position changes- Hydraulic brake cylinder- Large ball-bearing turntable for easy miter adjustment (durable)- Chip clearing brush- Machine base with automatic cooling system- Lockable main switch, eme ...
cutting diameter: 350 mmsaw band length: 4640 x 34 x 1,1 mmtable height: -- mm: 350 mm: 15 - 100 m/min: 4,0 kW: 2800 kg: 2200 x 3200 x 2200 mmFully automatic band saws with two-column guide for series cuts in particularmaterials that are difficult to machine and solid material.With this machine, MEP offers you a machine that is technically on thehighest level and by using the highest quality materials one is nothas an unbeatable, robust and torsion-resistant structure. An extremeRobust saw bow made of gray cast iron ensures the necessary stabilityimpressive cutting results and the strong cast iron columnswhich the saw arch slides by means of pre-stressed linear guides take care of themselvesat maximum load for the highest cutting precision. The modernMachine control (MEP NC 5.0) offers the user maximum ease of use andensures trouble-free operation. (Check/evaluation/correction inreal tim ...
saw blade diameter: 370 x 3,0 x 40 mmcutting diameter: 120 mmstroke: -- mmcapacity 90 degrees: square: 100 mmcapacity 90 degrees: flat: 180 x 100 mmcapacity 45 degrees: round: li. 120 / re. 105 mmcapacity 45 degrees: square: li. 100 / re. 100 mmcapacity 45 degrees: flat: li. 130x100 / re . 130x10 mmcapacity 60 degrees: round: 110 mmcapacity 60 degrees: square: 90 mmcapacity 60 degrees: flat: 90 x 100 mmtotal power requirement: 1,8 / 2,2 kWweight of the machine ca.: 392 kgdimensions of the machine ca.: 700 x 900 x 1800 mm-The powerful, 2-stage gear was specially designed for cuts in solid materialdesigned-The user has a total of 4 blade speeds for optimal adjustmentthe material available-The large bearing rotary table with internal table clamping andPrecision stops at 0/45/60° ensure quick adjustabilitymiter cuts-The vice with quick clamping (optional is a pneumatic oneVise = MA, availab ...
Diametro di taglio: 340 / 340290 mmLunghezza nastro: 600 52 2,5 mmLunghezza di taglio max.: x 600 mmPotenza totale richiesta: 6 kW Peso della macchina ca.: 2 tDimensioni della macchina ca.: 2,52,51,5 m
Heinz Sanders GmbH
