Fabbricante:
(Categoria: 104)
width of the strips: 75.0 mmband length: 2000 mmband speed: 343.0 mm/sekgrinding width: 530 Plantisch mmtable height: 475 - 1240 mmtotal power requirement: 3.0 kWweight of the machine ca.: 100 kgrange L-W-H: 500 x 1010 x 1000 mmDescription:The belt sander models TAS 75 and 150 are powerfulQuality machines, built according to the strictest environmental andSafety regulations. The belt sanders are standardwith motor brake, adjustable working height, eye protection,Angle stop and motor protection switch with zero voltage releasebuilt. The low-noise machine with CE mark is suitableideal for grinding all metals.Furnishing:- engine brake- adjustable working height- Plexiglass privacy screen- Angle stop- Motor protection switch with zero voltage release- self-adjusting belt tension- Powerful engine 3.6 kW- suction nozzle including: integrated suction The data for this ad was created with ModulM ...
width of the strips: 45.0 mmband length: 850 mmband speed: 8.0 m/sek.voltage: 230 Vtotal power requirement: 0.18 kW MADE IN GERMANY Furnishing :- robust electric motor belt sander- strong drive motor- including sanding belt- including workpiece stop- manually adjustable deflection pulley- Machine base- Connection cable + plug- Instruction manual in GermanThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
wheel diameter: 250 mmgrinding wheel size: 250 x 25 x 20 mmturning speeds: 2850 U/minvoltage: 400 Vtotal power requirement: 2.0 kWweight of the machine ca.: 23.0 kg.dimensions of the machine ca.: 600 x 290 x 300 mmFurnishing:- Heavy design and high quality equipment- ideal for professional use- Ideal for matting, polishing- up to mirror-smooth surfaces of various materials- with the help of optionally available polishing discs and polishing pastes- Lockable ON-OFF switch according to IP54 with undervoltage release- Including motor with copper winding for a long service life- Standard with rubber feet for vibration-free work- Very smooth running thanks to balanced rotor with quality ball bearings- Elegant machine body made from high quality die-cast- Suitable for polishing metal, plastic and non-ferrous materialsScope of delivery:- Soft polishing pad- Hard polishing pad- Operating instruc ...
grinding width: 32.0 mmmax. dia. of grinding wheel: 250 mmgrinding wheel size: 250 x 32 x 32 mmturning speeds: 2850 U/minGrain size: K 36 / K 80 engine output: 1.5 kWvoltage: 400 Vweight: 30.0 kgrange L-W-H: 510 x 320 x 360 mmscope of delivery : - Grinding disc K 36- Finishing wheel K 80- Spark protection on both sides- workpiece supportThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
width of the strips: 75.0 mmband length: 2000 mmband speed: 14.5 + 29 m/sekgrinding width: 460 x 75 Plantisch mmDust suction hood: 100 mmtotal power requirement: 3.0 kW 100% EDweight of the machine ca.: 67.0 kgrange L-W-H: 1080 x 440 x 1000 mm Standard with 2 speeds, ideal for grinding stainless steelproperties- Good sanding performance due to high belt speed- Quick adjustment for horizontal and inclined position- Continuous flat grinding surface for optimal grinding of long workpieces- Constant belt tension through spring-loaded tensioning device- Universally applicable for grinding edges, surfaces and for cylindrical grinding- Including quick-release system for quick strap changes- Simple adjustment of the parallel belt run by means of an adjusting screw- Graphite coating on the flat grinding surface increases the sliding properties of the Sanding beltscope of delivery- Sanding belt ...
width of the strips: 150 mmband length: 2000 mmband speed: 34,0 mm/sekgrinding width: 530 Plantisch mmtable height: 475 - 1240 mmtotal power requirement: 4.0 kWweight of the machine ca.: 115 kgFurnishing :- integrated suction- engine brake- adjustable working height- Plexiglass privacy screen- Angle stop- Motor protection switch with zero voltage release- self-adjusting belt tension- Powerful motor 4.0 kW- suction nozzle including: integrated suction The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
width of the strips: 75.0 mmband length: 2000 mmband speed: 30.0 m/secgrinding width: 75 x 430 mmengine output: 3.0 kWweight: 75.0 kg including machine baseFurnishing:- Powerful belt sander- modularly expandable, for the trade and for small series.- Can be expanded with additional modules- Speeds ideal for metalworking with 3000 / min- Height-adjustable surface grinding table for linear surface grinding- Removable chip catcher- Connection option for external suction- Working height individually adjustable- Patented strap tensioning system- Robust three-phase motor- Low vibration The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
width of the strips: 100 mmband length: 920 mmband speed: 7.0 m/secloading area: 300 x 150 mmmotor: 0.44 KWmotor: 400 Voltrange L-W-H: 470 x 370 x 210 mm MADE IN GERMANY Furnishing :- robust electric motor belt sander- strong drive motor- including sanding belt- including workpiece stop- manually adjustable deflection pulley- Machine base- Connection cable + plug- Instruction manual in GermanThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
width of the strips: 100 mmband length: 920 mmband speed: 7.0 m/secloading area: 300 x 150 mmmotor: 0.44 KWmotor: 220 Voltrange L-W-H: 470 x 370 x 210 mm MADE IN GERMANY Furnishing :- robust electric motor belt sander- strong drive motor- including sanding belt- including workpiece stop- manually adjustable deflection pulley- Machine base- Connection cable + plug- Instruction manual in GermanThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
width of the strips: 200 mmband length: 1490 mmband speed: 8.0 m/secmotor: 400 Voltloading area: 500 x 280 mmtotal power requirement: 1.5 kWDimensions (HxWxD): 750 x 600 x 340 mm MADE IN GERMANY Furnishing :- robust electric motor belt sander- strong drive motor- including sanding belt- including workpiece stop- manually adjustable deflection pulley- Machine base- Connection cable + plug- Instruction manual in GermanThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
width of the strips: 150 mmband length: 2280 mmrevolutions per minute: 2880 U/minroll diameter: 140 / 80 mmtable-size: 700 x 350 mmengine output: 3.0 kWweight: 250 kgrange L-W-H: 1300 x 800 x 1500 mm- Machinevideo -https://www.youtube.com/watch?v=l-XFPai2BAAFurnishing :- Horizontal belt grinder- Small, flexible all-rounder- Solid gray cast iron unit - long-lasting, good grinding results- Motorized belt oscillation approx. 10 mm- Pneumatic belt tension- Small table on the pulley for grinding radii and shapes- The entire sanding belt can be used thanks to the height-adjustable work table- Including angle and miter fenceSpecial equipment included:- swiveling grinding unit 90 - 135 degrees- Support table on the pulleyThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
width of the strips: 300 mmband length: 2070 mmband speed: 7.0 m/secsurface of working table: 750 x 380 mmdiameter: 87.7 Führungsrollen mmengine output: 1.5 kWtotal power requirement: 400 Voltweight of the machine ca.: 88.0 kg.range L-W-H: 1050 x 600 x 400 mm MADE IN GERMANY Furnishing :- robust electric motor belt sander- strong drive motor- including sanding belt- including workpiece stop- manually adjustable deflection pulley- Machine base- Connection cable + plug- Instruction manual in GermanThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
1 usato: Rettificatrice cilindrica interna • Produttore: OVERBECK, Herborn • Modello: 250 I-HA • Numero di fabbrica: 261991 • Anno di costruzione: 1971 • Diametro di serraggio: max. 140 mm • Lunghezza foro rettificabile: max. circa 150 mm • Diametro foro rettificabile: max. circa 0,8-80 mm Accessori: senza mandrino portamola interno senza motore di azionamento per mandrini di rettifica interni Pulegge di rinvio per l'azionamento del mandrino disponibili (La macchina è stata installata dal precedente proprietario con un mandrino pneumatico azionato) Dispositivo di rettifica in piano, orientabile manualmente Serbatoio del liquido di raffreddamento con pompa
Continuously adjustable feed speed: 2-10m/min, vacuum table with water separator, filter system with pump, also suitable for small parts up to 80x80mm, also suitable for printed circuit boards and carbide parts, no over-grinding of coated surfaces (e.g. Alclad, foils, galvanized sheets), spray nozzle centrally above the disc, additional water line for coolant, separate valves for coolant and spray nozzles. Total height: 3425mm, working height: 2025mm, working level: 790-940mm (adjustable), length: 2850mm, width: 1800mm, length of the middle segment: 900mm, side distances left/right: 755/900mm. No defects known, completely overhauled in 2017, in operation until 2020. Including centrifuge, documentation and maintenance reports. An on-site inspection is possible.
Longitudinal movement of the table manual drive: 750mm, longitudinal movement of the table hydraulic drive: 730mm, transverse movement of the table manual drive: 300mm, transverse movement of the table hydraulic drive: 290mm, usable surface of the table: 700x250mm, number of T-slots: 3, width of T-slots: 14mm, vertical movement of the grinding head: 400mm, division value of the grinding head manual drive: 0.01mm, distance between the inside of the grinding wheel and the column: 347.5mm, clearance under the new grinding wheel: 355mm, maximum grinding wheel diameter: 305mm, minimum grinding wheel diameter: 230mm, grinding wheel width: 25mm, grinding wheel bore: 127mm, division value of the cross table manual drive: 0.02mm, longitudinal feed of the table hydraulically: 2-25m/min, cross feed of the table stepwise, hydraulic and adjustable: 2-16mm/stroke, cross feed of the support hydraulical ...
Numero macchina: 20932 Tensione di esercizio: 3 x 400 VAC Frequenza: 50/60 Hz. Corrente nominale: 46A 63A Tensione di controllo: 200-240 V CA Potenza: 28 kW Controllo: Portautensili: Testa di rettifica: Mandrino di rettifica: Il mandrino può essere ruotato dal motore Potenza di azionamento: 7,5 kW Velocità: 0 – 9000 giri/min Baionetta: Diametro del disco: Numero massimo di fette: Viaggio: X: 380 mm Y: 280 mm Z: 280 mm Nutrire: Assi X e Y: 20000 mm/min Asse Z: 10000 mm/min Assi girevoli: Designazione: asse C Angolo di rotazione: 340 Avanzamento: max. 66/s Asse: Asse A: rotazione infinita Alimentazione: max. 167/s Incl. raffreddamento dell'olio e sistema di raffreddamento del produttore ARO Incl. vari accessori per macchine abbinati come portautensili, linee di raffreddamento e altri dispositivi di bloccaggio
x-axis: 700 mmy-axis: 410 mmz-axis: 500 mmfeed range: 30000 mm/minA-Axis: 175 mmC-axis: 320 °workpiece dia.: 340-500 mmworkpiece length: 700-1000 mmworkpiece weight max.: kgmax. dia. of grinding wheel: mmspeed spindle max.: 8000 U/min.power capacity: 11,5 / 14,5 kWControl: Siemens 840 Dsl tool taper: HSK 50E table-size: 1200 x 500 mmtotal power requirement: - kVAweight of the machine ca.: 8,5 tdimensions of the machine ca.: 3 x 2,6 x 3,55 m5 AXIS CNC TOOL AND CUTTER GRINDER- CNC Control Siemens 840Dsl- Milling Unit– Tooling- high-pressure coolant system- Tool ChangerThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Ø ruota a tazza: 180 mm Velocità della ruota a tazza: 2900 giri/min elettr. Collegamento: 380 V, 2900 giri/min, 0,9 kW Dimensioni tavola vibrante: 200 x 350 mm Tavolo oscillante inclinabile Tavolo girevole di +/- 20° Dimensioni: 750 x 350 x 1270 mm
Year: ca. 1970 magnetic plate size: 520 x 200 mmweight of the machine ca.: 1,4 tPlease note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Lunghezza massima di rettifica: 1000 mm, larghezza massima di rettifica: 500 mm, altezza massima di lavoro: 540 mm, corsa della slitta del mandrino di rettifica verticale/orizzontale: 465/ 500 mm, campo di rotazione: 1800, superficie di serraggio della tavola: 1500/450 mm, numero di fessure di serraggio: 3, distanza delle fessure di serraggio: 125 mm, larghezza delle fessure di serraggio: 16H7 mm, corsa trasversale della tavola: 500 mm, corsa longitudinale della tavola: 1000 mm. Lunghezza: 4650 mm, larghezza: 2600 mm, altezza: 2850 mm, peso: 7,1 t. Con tessera macchina. L'elettronica è stata rinnovata nel 2022. È possibile un'ispezione in loco.
spindle turning speed range: 170 - 18000 U/minweight of the machine ca.: 7,5 tdimensions of the machine ca.: 5,00 x 4,00 x 2,20 m--> Control conversion (2014) to Siemens Sinumerik 840D Solutionline--> Technical data Grinding diameter: 20 - 300 mm--> Oscillation diameter: 350 (500) mm--> Workpiece length: 300 (1300) mm--> Recommended grinding depth up to: 300 mm--> Grinding table stroke Z-axis (total): 650 (950) mm--> Resolution: 0.001 mm--> Rapid traverse: 12 m/min-1--> Grinding stroke speed: 0 - 9.99 m/min-1--> Feed rate: 0 - 99.99 m/min-1--> Step feed value during reversal: 0 - 0.999 mm--> Grinding table stroke X-axis (total): 150 mm--> Resolution: 0.001 mm / Ø--> Rapid traverse: 5 m/min-1/R--> Grinding stroke speed: 0 - 5 m/min-1/R--> Feed rate: 0 - 99.99 m/min-1/R--> Step feed value during reversal: 0 - 0.999 mm / Ø--> Swivel capability of the workpiece headstock:--> B-axis: -32° ...
diametro del trapano: 3 - 50 mmlunghezza di foratura: 500 mmangolo del labbro: 90 - 140 tensione: 380 Vpeso della macchina ca.: 120 kgdimensioni della macchina ca.: 0,80 x 0,60 x 1,30 mNumero di serie: 76658I dati di questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.
Offerta 73066 Indicazioni: - Dimensioni del nastro abrasivo ca. 2000 x 150 millimetri - Apertura di rettifica superficiale ca. 560 x 150 millimetri - Velocità del nastro abrasivo ca. 30 m/sec. - Rondella di contatto B 150 / D 200 mm - Puleggia motrice B 150 / D 200 mm - Azionamento 400 V / 3 kW - Altezza di lavoro regolabile - Revisione separata. Aspirazione - Ingombro ca. L 750 x A 1050 x P 1500 mm - Ingombro par. ca. L 750 x A 1250 x P 750 mm - Peso ca. 180 kg
A gear flank grinding machine Reishauer, completely overhauled by Burri Werkzeugmaschinen, is available. Grinding spindle speed: 3500rpm, cutting speed: 63m/s, max. gear diameter: 360mm, module range: 0.1-7, number of teeth: 6-600, max. workpiece height: 160mm, max. helix angle: +/-45°, max. workpiece weight: approx. 60kg. Min. wheel root circle diameter: 250mm, grinding wheel dimensions X/Y/Z: 350mm/104mm/160mm, grinding worm diameter range: 270mm-350mm, max. grinding width: 175mm, max. workpiece speed: 800rpm. Includes profiling devices, balancing device, structure-borne noise contact control, compact filter system, cooling unit, cooling water recooler, robot automation, and transport trolleys. Documentation available. An on-site inspection is possible.
Area di rettifica: 600 x 400 mm Tavolo magnetico Serbatoio del refrigerante varie mole
Lunghezza di rettifica: 500 mmLarghezza di rettifica: 200 mmAltezza del pezzo: 300 mmPotenza totale richiesta: 1,5 / 2,2 kWPeso della macchina ca.: 1,6 tDimensioni della macchina ca.: ,6 1,5 1,8 mI dati di questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.
grinding diameter: 1524 mmgrinding length: 4400 mmswing diameter: 1524 mmmax. workpiece weight between centres: - kggrinding wheel dia. x width: - mmControl: FANUC 18i-TB chucking diameter: - mmspindle motor: 37,2 kWworkpiece drive: 29,8 kWspindle speeds (infinitely variable): 450 - 1250 U/minwork piece spindle speed: 7 - 42 U/mingrinding slide stroke: 4900 mmtotal power requirement: ca 90 kWweight of the machine ca.: - tdimensions of the machine ca.: 12,5 x 3,6 x 2,8 m- FANUC 18i-TB CNC control- Coolant system & belt filter with separator- Spindle oil cooling- Motor-driven counterholder- 2 steady rests- Splash guardThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CONTROLS conventional WORKING RANGE (DOUBLE DISC GRINDER) Grinding wheel diameter: 750 mm grinding width max. - throughfeed grinding: 150 mm material thickness max. - throughfeed grindin: 70 mmGRINDING SPINDLE 1 spindle revolutions (max): 610 /minGRINDING SPINDLE 2 spindle revolutions (max): 610 /minCOMPONENT-FEEDER Feeder Design: rotary Feeder DIMENSIONS / WEIGHTS space requirements -left/right-: 5230 mm space requirements -front/back-: 4460 mm total height: 3600 mm total weight approx.: 11000 kgMachine is dismantled and stored
diametro della mola: 200 mmlarghezza max: 32 mmdiametro del foro della mola: 51 mmvelocità della mola: 2900 U/minpotenza del motore: 0,9 kWDerigliatrice a doppia mola montata su supportoI dati di questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.
È disponibile una vecchia rettificatrice cilindrica di precisione Carl Zeiss. Include numerosi accessori e strumenti. È possibile un'ispezione in loco.
Heinz Sanders GmbH
