presse usati in vendita (1,634)

pressure: 800 tdistance between columns: 3160 mmstroke: 1100 mmcontrol: Siemens S5 distance table/blankh.,max. stroke up,adjustm. up: 1900 mmtable surface area: 3100 x 1900 mmdie-cushion pressure inside the table: 300 tstroke of drawing cushion in table: 400 mmdie-cushion pressure in pusher: 80 tstroke of drawing cushion in table: 150 mmram surface: 3100 x 1900 mmdie-cushion in pusher: hydraulic, controlled die-cushion inside the table: hydraulic, controlled total power requirement: 200 kWweight of the machine ca.: 150 tdimensions of the machine ca.: 4,95 x 3,3 x 10,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 800 tdistance between columns: 3160 mmstroke: 1100 mmcontrol: Siemens S5 distance table/blankh.,max. stroke up,adjustm. up: 1900 mmtable surface area: 3100 x 1900 mmdie-cushion pressure inside the table: 300 tstroke of drawing cushion in table: 400 mmdie-cushion pressure in pusher: 80 tstroke of drawing cushion in table: 150 mmram surface: 3100 x 1900 mmdie-cushion in pusher: hydraulic, controlled die-cushion inside the table: hydraulic, controlled total power requirement: 200 kWweight of the machine ca.: 150 tdimensions of the machine ca.: 4,95 x 3,3 x 10,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 600 tdistance between columns: 2600 mmstroke: 900 mmdistance table/blankh.,max. stroke up,adjustm. up: 1600 mmtable surface area: 2500 x 1730 mmdie-cushion pressure inside the table: 250 tstroke of drawing cushion in table: 400 mmdie-cushion pressure in pusher: 63 tstroke of drawing cushion in pusher: 150 mmram surface: 2500 x 1730 mmcolumn travel -side: 1100 mmdie-cushion inside the table: hydraulic, controlled die-cushion in pusher: hydraulic, controlled total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: moverhauled in 2005The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 600 tdistance between columns: 2600 mmstroke: 900 mmdistance table/blankh.,max. stroke up,adjustm. up: 1600 mmtable surface area: 2500 x 1730 mmdie-cushion pressure inside the table: 250 tstroke of drawing cushion in table: 400 mmdie-cushion pressure in pusher: 63 tstroke of drawing cushion in pusher: 150 mmram surface: 2500 x 1730 mmcolumn travel -side: 1100 mmdie-cushion inside the table: hydraulic, controlled die-cushion in pusher: hydraulic, controlled total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: moverhauled in 2005The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 600 tdistance between columns: 2600 mmstroke: 900 mmdistance table/blankh.,max. stroke up,adjustm. up: 1600 mmtable surface area: 2500 x 1730 mmdie-cushion pressure inside the table: 250 tstroke of drawing cushion in table: 400 mmdie-cushion pressure in pusher: 63 tstroke of drawing cushion in pusher: 150 mmram surface: 2500 x 1730 mmcolumn travel -side: 1100 mmdie-cushion inside the table: hydraulic, controlled die-cushion in pusher: hydraulic, controlled total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: moverhauled in 2005The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 1000 tdistance between columns: 4150 mmstroke: 1200 mmdistance table/blankh.,max. stroke up,adjustm. up: 2100 mmtable surface area: 4000 x 2200 mmdie-cushion pressure inside the table: 360 tstroke of drawing cushion in table: 300 mmdie-cushion pressure in pusher: 100 tstroke of drawing cushion in pusher: 150 mmram surface: 4000 x 2200 mmcolumn travel -side: 1300 mmdie-cushion inside the table: hydraulic, controlled die-cushion in pusher: hydraulic, controlled Cut Shock absorption: hydraulic total power requirement: kWweight of the machine ca.: 280 tdimensions of the machine ca.: mThe machine was overtaken 1999.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 800 tdistance between columns: 3160 mmstroke: 1100 mmdistance table/blankh.,max. stroke up,adjustm. up: 1900 mmtable surface area: 3100 x 1900 mmdie-cushion pressure inside the table: 300 tstroke of drawing cushion in table: 400 mmdie-cushion pressure in pusher: 80 tstroke of drawing cushion in table: 150 mmram surface: 3100 x 1900 mmdie-cushion in pusher: hydraulic, controlled die-cushion inside the table: hydraulic, controlled total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 1000 tdistance between columns: 4150 mmstroke: 1200 mmdistance table/blankh.,max. stroke up,adjustm. up: 2100 mmtable surface area: 4000 x 2200 mmdie-cushion pressure inside the table: 360 tstroke of drawing cushion in table: 300 mmdie-cushion pressure in pusher: 100 tstroke of drawing cushion in pusher: 150 mmram surface: 4000 x 2200 mmcolumn travel -side: 1300 mmdie-cushion inside the table: hydraulic, controlled die-cushion in pusher: hydraulic, controlled Cut Shock absorption: hydraulic total power requirement: kWweight of the machine ca.: 280 tdimensions of the machine ca.: mThe machine was overtaken 1999.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 800 tdistance between columns: 3160 mmstroke: 1100 mmcontrol: Siemens S5 distance table/blankh.,max. stroke up,adjustm. up: 1900 mmtable surface area: 3100 x 1900 mmdie-cushion pressure inside the table: 300 tstroke of drawing cushion in table: 400 mmdie-cushion pressure in pusher: 80 tstroke of drawing cushion in table: 150 mmram surface: 3100 x 1900 mmdie-cushion in pusher: hydraulic, controlled die-cushion inside the table: hydraulic, controlled total power requirement: 200 kWweight of the machine ca.: 150 tdimensions of the machine ca.: 4,95 x 3,3 x 10,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 800 tdistance between columns: 3160 mmstroke: 1100 mmcontrol: Siemens S5 distance table/blankh.,max. stroke up,adjustm. up: 1900 mmtable surface area: 3100 x 1900 mmdie-cushion pressure inside the table: 300 tstroke of drawing cushion in table: 400 mmdie-cushion pressure in pusher: 80 tstroke of drawing cushion in table: 150 mmram surface: 3100 x 1900 mmdie-cushion in pusher: hydraulic, controlled die-cushion inside the table: hydraulic, controlled total power requirement: 200 kWweight of the machine ca.: 150 tdimensions of the machine ca.: 4,95 x 3,3 x 10,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pressione: 160 Tstroke: 810 mm, Scatola: 360 mm-Dimensione della tavola: 900 x 630 mmDimensione della RAM: 750 x 450 mmdayLuminosità: 800 mmDiametro dei pistoni: 400/360 mmram Velocità della corsa: 200 mm/sec Potenza totale richiesta: 17 kWweight della macchina ca.: 7 tI dati per questo spot sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.

pressure: 120/15 tdistance between columns: 860 mmstroke: 170 mmtable-size: 860 x 600 mmdayligth: 350 mmmax. distance table - ram: 520 mmram head dimension: 860 x 600 mmhole in the table: 200 x 140 mmtable height over floor: 850 mmtotal power requirement: 25 kWweight of the machine ca.: 7,5 tdimensions of the machine ca.: 2,3 x 1,7 x 3,4 mMaximum ram pressure: 120 kNMaximum pull-out pressure: 15 kNSick light curtainSafety distance: 180 mmMaximum overrun: 15 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 tchamfer lenght: 4000 mmdistance between columns: 3550 mmControl: Delem weight of the machine ca.: 20.000 kgdimensions of the machine ca.: 5000x2000x3000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 040 tchamfer lenght: 1600 mmdistance between columns: 1100 mmstroke of upper beam: 100 mmthroat: 195 mmworking feed: 10.0 mm/secreturn speed: 70.0 mm/sec: 180 barwork height max.: 840 mmtable width: 110 mmdayligth: 295 mmControl: ATL 550 total power requirement: 5.5 kWweight: 2500 kgrange L-W-H: 2100 x 1200 x 1800 mmEquipment:- NC-controlled hydraulic press brake, with torsion shaft- with ATLANTIC NC control - model ATL 550 Positioning of the backgauge (X axis) Positioning of the depth adjustment (Y1 Y2 axis) Possibility of programming different programs Memory capacity max. 200 programs - max. 400 blocks Swivel control panel, left front- Electro-motorized backgauge (X axis) with 2x stop fingers, manually adjustable (R Z axis)- Tool holder system A - with top wedge crowning- Split insert/bending tools- Lateral safety guards- rear safety guard- 1x freely movable double foot swit ...

pressure: 035 tchamfer lenght: 1250 mmdistance between columns: 1070 mmpiston stroke: 150 + 60 mmcolumn arm: 410 mmtable height: 800 mmdayligth: 470 mmworking feed: 10.0 mm/secreturn speed: 70.0 mm/sectable width: 140 mmControl: ELGO NC Number of working hours: ~ 9.600 hoil volume: 80.0 loperating pressure: max. 240 barvoltage: 380 Vtotal power requirement: 4.0 kWweight: 2200 kgrange L-W-H: 1800 x 1450 x 2150 mm Well maintained condition With only approx. 9.600 operating hours ()Features:- Robust NC-controlled hydraulic press brake- With ELGO NC control unit P8822” Positioning of the backgauge (X axis) Positioning of the depth adjustment (Y1+Y2 axis) Swiveling control panel, front left- NC electric motorized backgauge (X axis) With 2x stop fingers, manually adjustable (R+Z axis)- 1x split set of pointed tools - top- 1x rotatable Multi-V die block- Side safety device (swivel doors)+ FIE ...

Pressione: 10 Superficie tabile: 1,800 x 205 mmram Corsa: 150 mm Larghezza testa: 50 mm Golo: 150 mm Quantità di olio: 75 lweight della macchina ca.: - carico tconnected: 380 V / 50 Hz Dimensioni della macchina ca.: 2,0 x 1,0 x 2,10 mPressa di raddrizzamento EITEL - RP 10 I dati per questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.

Pressione: 100 t, distanza tra le colonne: 400 mm, corsa: 20 - 140 mm, superficie tavole: 900 x 710 mmram, superficie: 560 x 450 mmram, regolazione: 80 mmday, luminosità: 470 mmno. Numero di corse: 70 Potenza totale a mozzo/minimo: 10,5 kWweight della macchina ca.: 9 tdimensioni della macchina L x Larga x Alta: 1,98 x 1,60 x 3,10 m I dati per questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.

Pressione: 200 Lunghezza tabile: 2200 mm Larghezza tavola: 1550 mmday Luminosità: 2200 Capacità di ritorno della mmram: 6.000 kg Capacità di carico prevista: 10.000 kp Requisiti totali di potenza: ? ca. 25-30 kWweight della macchina ca.: 30 tdimensioni della macchina ca.: 4 7 7 mImballaggio: ca. 13,4 x 3 x 3 m I dati per questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.

pressure: 40.0 tchamfer lenght: 1600 mmdistance between columns: 1100 mmstroke of upper beam: 100 mmthroat: 195 mmworking feed: 10.0 mm/secreturn speed: 70.0 mm/sec: 180 barwork height max.: 840 mmtable width: 110 mmdayligth: 295 mmControl: ATL 550 total power requirement: 5.5 kWweight: 2500 kgrange L-W-H: 2100 x 1200 x 1800 mmEquipment:- NC-controlled hydraulic press brake, with torsion shaft- with ATLANTIC NC control - model ATL 550 Positioning of the backgauge (X axis) Positioning of the depth adjustment (Y1 Y2 axis) Possibility of programming different programs Memory capacity max. 200 programs - max. 400 blocks Swivel control panel, left front- Electro-motorized backgauge (X axis) with 2x stop fingers, manually adjustable (R Z axis)- Tool holder system A - with top wedge crowning- Split insert/bending tools- Lateral safety guards- rear safety guard- 1x freely movable double foot swi ...

Pressione: tchamfer Lunghezza: mmDistanza tra colonne: MmRequisiti totali di potenza: kWpeso della macchina ca.: Trequired Space: mI dati per questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.

pressione: diametro del pezzo: mmI dati per questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.

pressure: 220 tchamfer lenght: 3200 mmdistance between columns: 2700 mmControl: Cybelec CybTouch 12 throat: 400 mmstroke: 220 mmdayligth: 480 mm: 140 mm/sbending speed: 0-10 mm/s: 110 mm/stotal power requirement: 18,5 kWdimensions: 3600 x 2000 x 2900 mmweight: 11.500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 130 tchamfer lenght: 3200 mmdistance between columns: 2700 mmControl: Cybelec CybTouch 12 throat: 400 mmstroke: 200 mmdayligth: 480 mm: 200 mm/sbending speed: 0-10 mm/s: 120 mm/stotal power requirement: 7,5 kWdimensions: 3600 x 1800 x 2700 mmweight: 8.200 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 tthroat: 250 mmstroke: 400 mmdayligth: 500 mmtable surface area: 800 x 500 mmControl: Siemens S7 hole in the table: 0 mmtable height over floor: 500 mmram surface: 800 x 500 mmworking feed: 10 mm/secspeed down: 110 mm/sekspeed up: 160 mm/sekpower requirement: 11,0 kWweight of the machine ca.: 5,5 tdimensions: 1,9 x 1,7 x 2,9 mSingle-column press with- Hardened and chrome-plated cylinder- Main cylinder diameter 220 mm- Auxiliary cylinder diameter 50 mm- Bosch Rextroth pump, valves, and filters- Hydraulic overload valve- Hydraulic proportional valve- Siemens touchscreen control panel with remote maintenance access Settings for stroke, pressure, speed, and dwell time- Category 4 sensors and photoelectric sensor- Two-hand control panel with reset and emergency stop buttons- CE markingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 tstroke: 380 mmtable surface area: 1100x424 mmdayligth: 180/750 mmdistance between columns: 1100 mmdiameter of piston: 90 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 060 tstroke: 350 mmtable surface area: 750x344 mmdayligth: 197/750 mmdistance between columns: 750 mmdiameter of piston: 75 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pressione: 15 Tthroat: - mmstroke: - mmDimensioni (L/W/H): 1200 x 1200 x 1700 mm Potenza totale: - kW I dati per questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.

pressure: 150 tchamfer lenght: 2500 mmdistance between columns: 2100 mmcolumn arm: 250 mmdayligth: 325 mmControl: ATL 550 weight: 7700 kgrange L-W-H: 4000 x 1800 x 2400 mmEquipment:- ATL 550 control unit- FIESSLER laser protection- Electric back gauge ( X )- Positioning of the depth adjustment ( Y1 Y2 )- 2 stop fingers, manually adjustable- Rear side guard- Upper and lower toolThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 150 tthroat: 400 mmstroke: 400 mmdayligth: 600 mmtable surface area: 1000 x 600 mmControl: Siemens S7 hole in the table: 0 mmtable height over floor: mmram surface: 1000 x 600 mmworking feed: 5 - 15 mm/secspeed down: 130 mm/sekspeed up: 180 mm/sekpower requirement: 18 kWweight of the machine ca.: 12,0 tdimensions: 2,4 x 1,9 x 3,5 mSingle-column press with- Hardened and chrome-plated cylinder- Main cylinder diameter 270 mm- Auxiliary cylinder diameter 70 mm- Bosch Rextroth pump, valves, and filters- Hydraulic overload valve- Hydraulic proportional valve- Siemens touchscreen control panel with remote maintenance access Settings for stroke, pressure, speed, and dwell time- Category 4 sensors and photoelectric sensor- Two-hand control panel with reset and emergency stop buttons- CE markingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 330 tchamfer lenght: 6100 mmdistance between columns: 5600 mmControl: Cybelec VisiTouch 24 stroke: 300 mmdayligth: 500 mm: 160 mm/sbending speed: 0-9 mm/stotal power requirement: 32 kWweight of the machine ca.: 36.000 kgdimensions: 6970 x 2300 x 4150 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.