presse usati in vendita (1,627)

pressure:150 tthroat:350 mmstroke:6 - 122 mmno. of strokes:45 /mindistance table/ram, max. stroke up, adjustment up:440 mmtable surface area:820 x 600 mmhole in the table:330 mmtable height over floor:820 mmram surface:500 x 350 mmram adjustment:75 mmpower requirement:10,0 kWweight:7,3 tdimensions (WxDxH):1,6 x 2,2 x 2,9 m

pressure:150 tthroat:350 mmstroke:6 - 122 mmno. of strokes:45 /mindistance table/ram, max. stroke up, adjustment up:440 mmtable surface area:820 x 600 mmhole in the table:350 mmtable height over floor:800 mmram surface:500 x 350 mmram adjustment:75 mmpower requirement:10,0 kWweight:7,1 tdimensions (WxDxH):1,5 x 2,1 x 2,9 m

pressure:40 tdistance between columns:495 mmstroke:150 mmdistance table/ram, max. stroke up, adjustment up:300 mmtable surface area:490 x 400 mmhole in the table:50 mmtable height over floor:950 mmside window:155 mmram surface:150 mmspeed down:480 mm/sspeed up:480 mm/sworking speed:20 mm/soil volume:115 lpower requirement:7,5 kWweight:2,2 tdimensions (WxDxH):1,35 x 1,1 x 2,2 mdepth stop:mechanisch foundation pit:nicht erforderlich

Pressure:200 tdistance between columns:1910 mmstroke:600 mmdistance table/ram, max. stroke up, adjustment up:800 mmtable surface area:1900 x 1150 mmpressure of drawing cushion in table:80 tstroke of drawing cushion in table:300 mmdie cushion area:1500 x 950 mmtable height over floor:800 mmside window:1000 mmram surface:1900 x 1100 mmreturn capacity:36 tspeed down:400 mm/sspeed up:170 mm/sworking speed:30,5 mm/soil volume:1500 lheight over floor:4,85 mheight beneath floor:2,6 mpower requirement:45,0 kWweight:38,0 tdimensions (WxDxH):3,05 x 2,8 x 5,55 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in table:hydraulic

pressure:300 tdistance between columns:1220 mmstroke:1000 mmdistance table/ram, max. stroke up, adjustment up:1200 mmtable surface area:1200 x 1000 mmpressure of drawing cushion in table:115 tstroke of drawing cushion in table:400 mmdie cushion area:1100 x 860 mmtable height over floor:900 mmside window:550 x 1000 mmram surface:1200 x 1030 mmspeed down:400 mm/sspeed up:350 mm/sworking speed:12 - 31 mm/soil volume:1080 lpower requirement:36,0 + 19,0 kWweight:22,0 tdimensions (WxDxH):2,5 x 2,5 x 6,3 mheight over floor:5,4 mheight beneath floor:0,9 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 light guard:Sick hydraulic safety block and pump:Fabrikat Rexroth

pressure:100 tthroat:375 mmstroke:20 - 125 mmno. of strokes:30 - 80 /mindistance table/ram, max. stroke up, adjustment up:515 mmtable surface area:900 x 635 mmhole in the table:280 mmtable height over floor:800 mmpassage to the back:570 mmram surface:700 x 450 mmram adjustment:80 mmpower requirement:15,0 kWweight:8,0 tdimensions (WxDxH):1,5 x 2,4 x 3,5 mGerman Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch:pneumatic overload protection in ram:hydraulic ram adjustment:motoric ram counterbalance:pneumatic

pressure:400 tthroat:520 mmstroke:20 - 200 mmno. of strokes:30 /mindistance table/ram, max. stroke up, adjustment up:680 mmtable surface area:1600 x 1000 mmtable height over floor:715 mmpassage to the back:1000 mmram surface:1300 x 800 mmram adjustment:130 mmpower requirement:38,0 kWweight:41,0 tdimensions (WxDxH):2,1 x 2,6 x 4,2 mGerman Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch-/ brake combination:pneumatic, Ortlinghaus overload protection in ram:hydraulic ram adjustment:motoric ram counterbalance:pneumatic

pressure:25 tthroat:400 mmstroke:1000 mmdistance table/ram, max. stroke up, adjustment up:1100 mmtable surface area:620 x 620 mmHole in the table:80 mmtable height over floor:650 mmram surface:110 mmspeed down:300 mm/sspeed up:500 mm/sworking speed:14 - 85 mm/soil volume:400 lpower requirement:6,0 kWweight:3,8 tdimensions (WxDxH):1,5 x 2,1 x 3,9 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2

pressure:40 tdistance between columns:500 mmstroke:150 mmdistance table/ram, max. stroke up, adjustment up:300 mmtable surface area:480 x 400 mmhole in the table:50 mmtable height over floor:950 mmside window:150 mmram surface:150 mmspeed down:480 mm/sspeed up:480 mm/sworking speed:20 mm/soil volume:160 lpower requirement:7,5 kWweight:2,6 tdimensions (WxDxH):1,1 x 1,4 x 2,4 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 light guard:Sick depth stop:mechanical foundation pit:not necessary

pressure:400 tstroke:280 mmno. of strokes:56 Hub/mindistance table/ram, max. stroke up, adjustment up:680 mmtable surface area:560 x 750 mmallowed max. force:600 tblow die to die:800 tspindle diameter:200 mmram surface:560 x 560 mmheight over floor:4,1 mpower requirement:37,0 kWweight:12,0 tdimensions (WxDxH):2,2 x 2,0 x 4,25 m

pressure:150 tthroat:520 mmstroke:30 - 200 mmno. of strokes:15 - 60 /mindistance table/ram, max. stroke up, adjustment up:650 mmtable surface area:1600 x 1000 mmhole in the table:1040 x 140 mmtable height over floor:1000 mmpassage to the back:1000 mmram surface:1400 x 800 mmram adjustment:120 mmpower requirement:20,0 kWweight:27,5 tdimensions (WxDxH):2,3 x 2,75 x 4,5 mclutch-/ brake combination:pneumatic; Ortlinghaus overload protection in ram:hydraulic ram counterbalance:pneumatic ram adjustment:semi-automatic Option: NEW electrical controls:Siemens S7-1500 F

pressure:25 tthroat:355 mmstroke:500 mmdistance table/ram, max. stroke up, adjustment up:800 mmtable surface area:500 x 500 mmhole in the table:180 mmtable height over floor:700 mmram surface:250 x 250 mmpower requirement:7,5 kWweight:2,1 tdimensions (WxDxH):1,45 x 0,9 x 2,55 m

: neu : ca. 8 Wochen ab Auftragse : Italien : 11000 €: 211.2 €: 50 to: fix : 350 mm: 900 mm: 900 mm: max. 9 mm/s: 0,75 kW: 1700 mm: 700 mm: 2100 mm: 650 kgThe hydraulic movement of the piston is controlled by a handwheel,which enables very sensitive and precise positioning.One-handed operation is possible thanks to the working speed of less than 10 mm/s.Very suitable for straightening and pressing work.The cylinder can be moved sideway by handwheel (only ",M", versions)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 37600 €: 718.16 €: 40 to: 1550 mm: X und Y Achse : 160 mm: 1260 mm: 320 mm: 380 mm: hydraulisch : 90 mm/s: 10 mm/s: 600 mm: 845 mm: 100 mm: 120 l: 5,5 kW: 2000 mm: 1600 mm: 2235 mm: 3450 kgNC control for immersion depth (Y) and back gauge (X)synchronization control by means of a torsion shaftsheet support armslight barriersintermediate pieces for the upper tool clampingdie seat and diedie seat with 4 V openingssplit upper tool, slightly cranked, dividedpedaluser manual in GERMAN or ENGLISHOPTIONAL EQUIPMENT:laser safety device FiesslerNC controlled R axismanual crowning tablemotorized crowning tableThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 72300 €: 1366.47 €: 40 to: 1250 mm: Y1 / Y2 / X und R Achse : 200 mm: 1050 mm: 250 mm: 440 mm: servomotorischer Spindela : 115 mm/s: 10 mm/s: 115 mm/s: 650 mm: 250 mm: 1000 mm: 7.2 kW: 1950 mm: 1450 mm: 2650 mm: 3600 kgSTANDARD EQUIPTMENT:servomotorized spindle drive4 axes (Y1, Y2, X and R)Color graphics controlDELEM DA-66S- 17 ", Touchscreen- 3D imaging in simulation and production- Suitable for personal Windows applications- Compatible with DelemModusys- USB and peripheral interface- Skill-specific application treatment- Sensor, bending and correction interfaceservo motorized back gauge on linear guides and ball screwsCNC crowning tableupper tool 1010 / A / 75 °, devidedand cranked4-V die block 60x60 2009 (V = 16,22,35 and 50 mm)laser safety device Fiessler AKASmounted on the upper beamlinear guided sheet support armsaccording to C ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 70300 €: 1328.67 €: 110 to: 900 mm: 540 mm: 180 mm: 14 - 114 mm: 60 1/min: 490x325 mm: 90 mm: 280 mm: 7.5 kW: 1870 mm: 1320 mm: 2800 mm: 5600 kg8-fold ram guidefront protection by light guardmanual ram adjustmentmech. overload safety deviceautomatic lubricationuser manual in GERMAN and ENGLISHaccording to CE rulesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Auction-ID: A1-45711-179

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 69320 €: 1310.15 €: 100 to: 3050 mm: Y1 / Y2 / X Achse : 265 mm: 2600 mm: 450 mm: 530 mm: hydraulisch : 180 mm/s: 10 mm/s: 120 mm/s: 500 mm/s: 900 mm: 104 mm: 11 kW: 4200 mm: 1670 mm: 2850 mm: 8500 kg3 axes (Y1, Y2,X)CNC control DT-15- 2D grafic display 15",- intuitive touch-screen control (simple drawing of the bending outline with your finger)- user friendly programming in dialogue form- automatic calculation of the bending sequence- automatic calculation of the blank sheet size- graphic product and tool memory- correction possibility- USB interfaces for backup and programm transportation- PC software, generating programms on the PC and transfer to the machine by USBservo motorized back gauge on linear guides and ball screwsback gauge finger blocks on double linear guidesCNC CONTROLLED CROWNING TABLEupper tool 1010 / A / 75 °, devi ...

Auction-ID: A1-45711-30

: neu : 2026 : 080186 : prompt, Zwischenverkauf v : Türkei : 81476 €: 1309.77 €: 1 : 69300 €: 135 to: 3050 mm: Y1 / Y2 / X und RAchse : 265 mm: 2600 mm: 450 mm: 530 mm: hydraulisch : 160 mm/s: 10 mm/s: 120 mm/s: 500 mm: 500 mm/s: 350 mm/s: 250 mm: 900 mm: 150 l: 15 kW: 4250 mm: 1700 mm: 2850 mm: 9580 kgSpecial campaignSpecial price and SKY 22 control free of chargeStandard accessories:4 axes (Y1, Y2,X and R)CNC control SKY 22- intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5 in full HD- with 2D and 3D working screen- direct programming of the bending angle- user friendly programming in dialogue form optionally in 2D or 3D mode- 2D and 3D simulation of the bending sequence- automatic tool selection in 3D mode- automatic calculation of the blank sheet size- bending order calculation- graphic product and tool memory- correction possibility- ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 17700 €: 339.84 €: 100 to: fix : 300 mm: 680 mm: 1520 mm: 8 mm/s: 5 mm/s: 10 mm/s: 500x1520 mm: 100 mm: 190 mm: 2630 mm: 1000 mm: 2350 mm: 2500 kg2 guidingsupper plate with T-slotstable plate with T-Slotsmanometerrapid down move with automtic changeto working speedpiston stops in every position2 hand controltable height adjustableaccording to CE regulationsuser manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 8300 €: 160.19 €: 1 : 100 to: horizontal verschiebbar : 300 mm: 1070 mm: 5 mm/s: 10 mm/s: 2110 mm: 1000 mm: 2430 mm: 1500 kgdemo machine / mint conditionnet price (price for new machine € 9.000,00)horizontally displaceable cylinder with clamping leversteel welded framestop at any positionpressure manometersafety valve against overloading2 V-blockstable height adjustabletable up-down movement attachmentcontrol by operating leveraccording to CE regulations user manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Auction-ID: A1-45711-61

Specifiche tecniche degli accessori Accessori: Griglia di protezione della pressione Produttore: LEINHAAS – NILSON, 646 Gelnhausen Tipo: Guardia della Stampa Nilson SDF Numero di fabbrica: 1120 Anno di fabbricazione: 03/1979 Configurazione Esecuzione: Griglia meccanica di protezione della pressa Auction-ID: A1-45711-112

Pressione: 200 Stroke: 500 mm Tabella:: 1000 - 800 Alimentazione in discesa: 150 -280 mm/sec Alimentazione sotto pressione: 10 - 26 mm/sec Alimentazione in aumento: 180 - 300 mm/sec altezza potibile sul pavimento: 750 mm Potenza totale richiesta: 22 kWweight della macchina ca.: 7 tdimensioni della macchina ca.: m I dati per questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.

Pressione: 720 Stroke: 15 mm Potenza totale richiesta: 3 kWweight della macchina ca.: 5 t-dimensioni della macchina ca.: 1300 x 1800 x 2200 m I dati per questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.

Auction-ID: A1-45711-59

Pressione: 1.000 T/Potenza nominale: 10.000 kNstroke Lunghezza massima: 1.650 Mm/Alimentazione operativa: 62 mm/sec Peso degli utensili max.: 40.000 kg-tensione: 400 V Potenza totale: 420 kWweight della macchina ca: 254 t I dati per questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.

Auction-ID: A1-45408-83

Dati tecnici Produttore: Grötzinger Tipo: SPP 30/90 Anno di produzione: 1973 Numero macchina: 10481173/4715 Capacità di stampa: 30 t Corsa operativa: 250 mm Superficie di taglio: 750/1 mm² Lunghezza di lavoro: 450 mm Larghezza del tavolo da lavoro: 390 mm Peso: circa 770 kg Configurazione Tipo di macchina: Stampa Informazioni sulla targhetta: Produttore: Grötzinger, Pforzheim Esecuzione: Pressa industriale con capacità di pressione di 30 t e corsa di 250 mm Auction-ID: A1-45711-116