fresatrici usati in vendita (2,449)

GeneralUniversal Machining Centre in monoBLOCK construction; Control: CELOS with Heidenhain TNC 640 Technical DataFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minWorking area 1Cross650 mmLongitudinal735 mmVertical560 mmTool changerTool changer planevertical Type of gripperDouble gripper Number of tools60 Max. tool length315 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets160 mmFloor space/WeightWeight approx.14500 KgNC swivel rotary table integrated in rigid tableType of Measuring system Direct measuring systemTable surface 800 x 650 (Ø 650) mmCentre bore 50 mmMaximum load (table centre) 600 KgSlot width 14 mm5. Axes (swivelling range) +120/-120 x 0,001 degree4. Axes (swivelling range) 360 x 0,001 degreeRotation speed max.4. Axis 40 rpmDistance between T-S ...

GeneralHighly productive compact machining centres; Control: Siemens 840D solutionline Technical DataFeed rate longitudinal/transverse/vertical1-60000/1-60000/1-60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal700 mmCross420 mmVertical380 mmMiscellaneousClamping SystemMAS 403 - 45° Floor space/WeightDimensions (L x W x H)1,65 x 2,34 x 2,5 (1,65 x 2,95 x 2,55) mWeight approx.4100 KgSpindle speed up to 24,000 r.p.m. BT30Spindle 24,000rpm with tool taper BT30 JIS B 6339 (MAS 403-45°) AC-Motor 20 / 4 KW (max. / 100% ED) Watercooling Spindle and Spindle motor via heat exchanger (fan)TableTable surface 840 x 420 mmMaximum load (table centre) 300 KgSlot width 14 mmNumber of Slots 2Clamping grid M 12, 100 x 100 mmTool clamping for BBT 30 (Big+)Tool taper BBT 30 - Big+ Pull stud MAS 403 - 45°Tool magazine 25 placesTool magazine 25 places (sui ...

x-travel: 350 mmy-travel: 150 mmz-travel: 340 mmtable surface area: 600 x 210 mmspindle taper: SK 40 spindle turning speed range: 40 - 2000 U/minfeeds: 5 - 500 mm/minrapid traverse: 1,2 m/mintotal power requirement: 1,9 kWweight of the machine ca.: 0,7 t- machine out of teaching shop -Accessories: solid table, vertical head with quill retraction, DRO on 3 axis HEIDENHAIN, various tool fixtures, various collets, original DECKEL tool cabinetThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Clamping devices, clamping claws, deep clamping jaws, clamping pads, clamping tools, step claws, low clamps, clamping irons, T-slot clamps-Clamping tool: groove width 34 mm-Number: 23 x clamping tools available-Price: per piece, minimum order 2 pieces-Dimensions: 160/72/H7 mm-Weight: 0.2 kg/piece

GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)SK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic HandwheelSoftware option - DXF ImportSoftware Option - DXF Import Possibility to open DXF files directly on the controller in order to extract contour and import it to the program.

Tavola di supporto girevole tra 0° e 180°, quindi lavorazione su 3 lati in un unico serraggio È possibile selezionare 2 velocità, 6.000 o 12.000 giri al minuto, in modo da poter lavorare sia profili in acciaio che in alluminio 4 perni di copiatura a controllo pneumatico Bloccaggio pneumatico del materiale Dispositivo di spruzzatura della quantità minima Larghezza del profilo: 30-120 mm Altezza del profilo: 50-100 mm Lunghezza della barra: 490 - 3.000 mm Peso: circa 350 kg

Flat belt pulley, belt pulley, drive pulley, roller pulley-Pulley: Flat belt pulleys 7 pieces-Width 70 mm-Hole: Ø 18 mm-Dimensions: see photos-Shipping/Price: complete-Dimensions box: 430/210/H115 mm-Weight: 11 kg

max. wheel diameter: 275 mmmax. module: 6 min. module: 1,5 Control: SINUMERIK 840 C tooth width: 5,5 mmspiral angle: min. 0 / max. 60 °max. number of teeth: 120 min. number of teeth: 5 ratio of transmission: 1:10 min. ratio of transmission: 1:1 work piece spindle speed: max. 110 U/minblade head turning speeds: 20 - 110 U/mintotal power requirement: 100 kWweight of the machine ca.: 16,7 tdimensions of the machine ca.: 5,20 x 2,30 x 2,40 mInternal deburring device U axis / Q spindlechip conveyorcoolant deviceElectrostatic air purifier ELBARONno toolsNo workpiece clamping device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Portautensili ISO 40, corse 800 x 300 x 400, 18 velocità mandrino 40 - 2000, 18 avanzamenti 10 - 500, corsa rapida, motore mandrino 2,2 kW, Gioco del mandrino asse X 0,3 mm, asse Y 0,2 mm Soffietto sugli assi X e Z nuovo

Max. distanza percorsa X-Y-Z 880 - 630 - 630 mm Mandrino 12.000 giri/min, 15 KW, SK 40 Tavola 1250 x 700 mm, 700 kg FRESATRICE CNC Plus NC - Testa di fresatura orientabile (asse B) NC - Testa divisoria (asse A) Sonda HEIDENHAIN TS 631 Modalità di funzionamento 4 Adduzione interna di refrigerante 40 bar Pacchetto di produzione Säneförderer

x-travel: 10000 mmy-travel: 1500 mmz-travel: 3000 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m- CNC control Heidenhain TNC 415B- controlled 2-axes NC-milling head 2,5°- coolant deviceThe machine will be sold without the plate fieldAccessories:ca. 20 pieces tool tapers DIN 2080 with bolts DIN 69872some spare parts like bevel gears for the milling head and ball screw for X-axis.Technische Daten / technical details:Verfahrweg X längs / X-travel longitudinal 10000 mmVerfahrweg Y quer / Y-travel cross 1500 mmVerfahrweg Z vertikal / Z-travel vertical 3000 mmWerkzeugschaft / spindle taper SK50 Drehzahlbereich (2-stufig) / spindle speed (2-steps) 35-3000 UpM /rpmVorschub / infeed 6-10000 mm/minEilgang X,Y,Z / rapid feed X,Y,Z 10, 15, 10 m/minAntriebsleistung Hauptmotor 100%ED / drive capacity main motor 1 ...

ISEL SM Alpha Omega – Centro di lavoro CNC a 5 assi con 2 mandrini In vendita è una fresatrice CNC a 5 assi ISEL SM Alpha Omega precisa e versatile, costruita nel 05/2015, dotata di due mandrini ad alta frequenza. Questa macchina è ideale per applicazioni nella tecnologia medica, nell'ingegneria di precisione, nella microlavorazione e nella costruzione di stampi e prototipi. Indicazioni: Modello: ISEL SM Alpha Omega Anno di costruzione: 05/2015 Numero d'ordine: 274507 SSZ6000 Assi: 5 (X, Y, Z, A, B) Viaggio: Asse X: 1800 mm Asse Y: 1700 mm Asse Z: 800 mm Mandrini: Quantità: 2 mandrini ad alta frequenza Velocità: fino a 60.000 giri/min Potenza: fino a 6 kW Portautensili: HSK25 / HSK32 Dimensioni (LxPxA): circa 2800 x 2550 x 2950 mm Peso: circa 1400 kg Solida struttura a sandwich in acciaio/granito per un'elevata rigidità e smorzamento delle vib ...

x-corsa: 1000 mmy-corsa: 600 mmz-corsa: mmpotenza totale richiesta: 2,5 kWpeso della macchina ca.: tdimensioni della macchina ca.: mI dati di questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.

x-corsa: 600 mmy-corsa: 400 mmz-corsa: 500 mmpotenza totale richiesta: 6 kWpeso della macchina ca.: tdimensioni della macchina ca.: mI dati di questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.

x-travel: 320 mmy-travel: 240 mmz-travel: 300 mmtotal power requirement: 3 kWweight of the machine ca.: 1 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Digitale Corse X/Y/Z: 400 x 200 x 400 mm Dimensioni del tavolo 700 x 330 mm Portautensili ISO 40 Morsa, idraulica Ristrutturato nel 2019

x-travel: 620 mmy-travel: 420 mmz-travel: 400 mmspindle taper ISO: 40 DIN 69871Aspindle turning speed range: 50 - 4000 U/mintable-size: 800 x 400 mmtable load: 400 kgfeeds -stepless-: max. 2000 mm/minrapid traverse: 5 / 4 m/minpower capacity - milling spindle: (S1) 10,5 kWquill stroke: 80 mmcoolant: voltage: 400 Vtotal power requirement: 17,5 kWweight of the machine ca.: 1,9 tdimensions of the machine ca.: 2,00 x 2,76 x 2,05 m- Fabr.No.: 90458- perfect condition from educational institution- Digital Read Out System Heidenhain ND780- electronic hand wheel- mechanical hand wheels- hydr. tool clamping- cont. variable spindle speeds- cont. variable feed rates- horizontal milling spindle- drilling quill- Coolant equipmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Clamping devices, clamping claws, deep clamping jaws, clamping pads, clamping tools, step claws, low clamps, clamping irons, T-slot clamps-Clamping tool: clamp with T-slot holder-Clamping width: approx. 85 mm-Groove width: 14 mmDimensions: see photos-Dimensions: 235/65/H110 mm-Weight: 7.4 kg

x-travel: 290 mmy-travel: 170 mmz-travel: 310 mmtable surface area: 600 x 210 mmspindle taper: SK 40 spindle turning speed range: 50 - 2600 U/minfeeds: 9 - 450 mm/minquill stroke: 70 mmtotal power requirement: 5,5 kWweight of the machine ca.: 720 kg- machine out of teaching shop -Accessories: solid table, vertical head with quill retraction, DRO on 3 axis HEIDENHAIN, various tool fixtures, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 2800 mmgear width: - mmmax. module: 20/30 min. module: Control: Siemens 840 D total power requirement: 40 kWweight of the machine ca.: 50 tThe machine has only a few working hours and is like new.With internal milling head.Note: If you require an external milling head, we can offer it separately. - The price of the new machine of this caliber is 2.3 million Euro.- With minimal operating hours, the machine is essentially new.- It is one of Gleasons largest machines- It has the possibility of dry or wet milling, and internal and external gearing.- The machine underwent a comprehensive manufacturers inspection in July 2023 and is in impeccable working order. - Machine is currently partially assembled to allow potential buyers to verify all functionalities. If you wish to see the machine in operation, we have two identical machines running in our produ ...

x-travel: 1700 mmy-travel: 1200 mmz-travel: 1600 mmtable surface area: 1700x1200 mmturning speeds: 35-1800 U/minfeed: 20-1550 m/minSpindle: 300 mmthroat: 1200 mmThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 500 mmy-travel: 400 mmz-travel: 400 mmtotal power requirement: 3 kWweight of the machine ca.: 2 tdimensions of the machine ca.: 2 x 2 x 2 mNo. 2392Universal tool milling machineHERMLE UWF 801Working area: 500 x 430 x 400 mmDrive: 3 kWControl: TNC 135With manual control: Working area 520 x 450 x 410 mm,fixed table 800 x 400 mmTool holder SK 4018 spindle speeds from 40 - 2000 1/minFeed stepless x,y 4 - 1600 mm/minz 4 - 1000 mm/minDimensions 2.3 x 2.3 x 1.7 mWeight 1350 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 480/500 mmy-travel: 230/250 mmz-travel: 380/400 mmspeeds: 45 - 2240 U/mintable surface area: 1000 x 250 mmtool taper: SK 40 control: HEIDENHAIN TNC 124 total power requirement: 3 kWweight of the machine ca.: 1550 kgdimensions of the machine ca.: 2600 x 2200 x 1800 mm- horizontal + vertical milling spindle- Cooling device- swiveling table- Chip tray- Feed X/Y/Z - axis infinitely adjustable 8-1680 mm/min- Rapid traverse X/Y/Z - axis 4000 mm/min- Control HEIDENHAIN TNC 124- Operating hours: 4764 hours- Machine light- Machine feet- Operation manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 500 mmy-travel: 400 mmz-travel: 400 mmControl: Heidenhain TNC 113 total power requirement: 4 kWweight of the machine ca.: 1,5 tdimensions of the machine ca.: 222 mNo. 5152Universal tool milling machineDeckel FP 4 M (K) - 2203Working area: 500 x 400 x 400Drive: 4 kWSpindle holder SK 40 / DIN-2080Speed range 50 - 2,500 min-1Feed rates 8-630 mm/min steplessRapid traverse 1.3 m/minFixed table 800 x 460 mmChip trayHeidenhain TNC 113 Active Digital readoutSpace requirement approx. 2 x 2 x 2mWeight approx. 1,500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 800 mmy-travel: 450 mmz-travel: 500 mmControl: CNC 332 / TNC 355 total power requirement: 5,5 kWweight of the machine ca.: 4 tdimensions of the machine ca.: ca. 3 x 3 x 2,5 mNo. 2213Universal tool milling machine MAHO MH 800 TWorking area: 800 x 450 x 500(800 longitudinal / 450 vertical / 500 transverse)Drive: 5.5 kWControl: Heidenhain CNC 332 / TNC 355Universal built-in rotary tableCoolant deviceChip traySplash guard half cabin, tool clampTechnical documentationTool holder ISO 40,Table clamping surface 600 x 900 m, max. table load 500 kg,quill stroke 80 mmSpeed range 63 - 3150 rpmFeed rate 1 - 1500 mm/minRapid traverse: 4.5 m/minWeight: approx. 4 tonsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 500 mmy-travel: 400 mmz-travel: 400 mmtotal power requirement: 4 kWweight of the machine ca.: 1,5 tdimensions of the machine ca.: 222 mNo. 5124Universal tool milling machineDECKEL FP 4MWorking area: 500 x 400 x 400Drive: 4 kWControl: 3-axis digital display HeidenhainSpindle holder SK 40 / M16Speed range 50-2500 min-1Feed rates 8-630 mm/minRapid traverse 1.3 m/minFixed table 800 x 460 mmChip traydocumentationSpace requirement approx. 2 x 2 x 2 mWeight approx. 1500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Corsa x: 300 mmCorsa Y: 300 mmCorsa Z: 400 mmControllo: Dialog / Contour 3 potenza totale richiesta: 4 kWpeso della macchina ca.: 1,5 tdimensioni della macchina ca.: 232 mPrezzo del pacchetto: 3 x camion libero DECKEL FP 2 EXWCodice prodotto:5267 FP 2 A Contour 35268 FP 2 A Contour 35290 FP 2 NC Dialogue 2

x-travel: 2000 mmy-travel: 920 mmz-travel: 900 mmtable surface area: 2200 x 750 mmtable load: 3 tnumber of T-slots: 6 T - slots - width: 18 mmT - slots distance: 120 mmspindle taper: ISO 50 DIN 69871-B spindle speed max.: 3000 U/mintransmission ratio: 1 speeds infinitely variable range 1: 60 - 3000 U/minweight of the machine ca.: 21,6 tfeeds longditudinal/cross/vertical: 0 - 5000 mm/minrapid traverse: 15000 mm/mintotal power requirement: 38 kwweight of the machine ca.: 11 tPull studs DIN69872-B | IKZHours:Control on: 43036 hMachine on: 41311 hProgram run 13894 hThe machine is already dismantled The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Corsa X: 500 mmCorsa Y: 400 mmCorsa Z: 400 mmPotenza totale richiesta: 4 kWPeso della macchina ca.: 1,8 tDimensioni della macchina ca.: 222 m1 x UWF 700 Digi3 x UWF 801 TNC 135 + 1241 x UWF 802 MDa liquidazione a magazzino, parzialmente non funzionante / necessita di riparazionePrezzo VHS / contro offerta

x-travel: 700 mmy-travel: 370 mmz-travel: 350 mmtotal power requirement: 5,5 kWweight of the machine ca.: 3 tdimensions of the machine ca.: 2,5 x 2,5 x 2,5 mVertical milling machineSpindle ISO-40, Speed range 48-2100 1/min,feeds 10-1000 mm/min, rapid traverseSpace requirement approx. 2.5 x 2.5 m, Weight approx. 2.5 tonnes.Active digital readout Heidenhain TNC-114Table clamping surface 1000 x 400 mm,Coolant device.Working area: 700 x 370 x 350Drive: 4/5.5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.