Machine travel (X-axis) 1020mm, (y axis) 540mm (z axis) 510mm X Axis Rapid Traverse 36 m/min Y Axis Rapid Traverse 36 m/min Z Axis Rapid Traverse 30 m/min Max. Spindle Speed 12000 r/min Max. Spindle Power 18.5 kW Max. Spindle Torque 353.2 N·m Table Length 12000 mm Table Width 540 mm Max. Table Weight 800 kg No. of tool station 30 Machine Length 2412mm, Width 3110mm and Height 3143mm Weight 6500kg Spindle nose: MAS BT 40 Feed range 1 – 15000 mm/min Fanuc Doosan I Series control RenishawTouch Probe 4th axis ready

This DOOSAN DNM 500 (2012) 4-axis Vertical Machining Centre was manufactured in 2012 in South Korea. It is equipped with a 8,000 rpm spindle, BT40 tool taper, a 4th axis (lehmann rotary table - dividing head) and a FANUC control unit. The table size is 1200 x 540 mm (X-axis 1020 mm / Y-axis 540 mm / Z-axis 510 mm). As additional equipment it comes with chip conveyor and internal cooling (IKZ). The machine is in very good condition due to installation of a new spindle and refurbishment of the rotary table in 2021. The rotating union has also renewed recently in 2024. It has operated 24420 run time hours and 9802 cutting hours.

Longitudinal travel X: 1020 mm Transverse travel Y: 540 mm Vertical travel Z: 510 mm Control: Siemens 820D Table length: 1200 mm Table width: 540 mm Maximum weight on the table: 800 kg Tool magazines: 30 Spindle taper: SK 40 Maximum spindle speed: 12000 rpm Spindle motor power: 15 kW ------------------- Length x width x height 3750.0 × 2284.0 × 2703.0 Weight 6500 kg

Control Fanuc ... Series 0i Clamping table surface ... 1000x450mm Axis X ... 800mm Axis Y ... 450mm Axis Z ... 510mm Spindle speed ... 0-8000 rpm. controlled axes ... 3 ISO 40 Machine weight ... 5000kg The machine is in good condition, possible to test under power. ...

• more information

Machine Details Stock number 1105-03821 Machine type machining center - vertical Make DOOSAN Type DNM 650 II Year of construction 2015 Control type CNC Storage location FRANCE Country of origin Korea Delivery time ON REQUEST Freight base from stock HAGUENAU FRANCE Technical details x-travel 1270 mm y-travel 670 mm z-travel 625 mm CNC control SIEMENS 840 D Table size 1300 x 670 mm table load 1000 kg Spindle holder ISO SK 40 Spindle speeds 8000 rpm Feed infinitely variable 8000 mm/min Rapid traverse 36 / 36 / 30 m/min Drive power - spindle motor 18,5 (15 min) kW Tool changing device 30 items. Operating voltage 380 V Total power requirement 40 kVA Machine weight ca.  ...

Catalog No. : 6569 Type: DNM 750 II Producer: Doosan Made in: 2018 Characteristic: Control system: Fanuc i-series Length of the working table: 1630 mm Width of the working table: 760 mm Maximum table load (evenly distributed): 1500 kg Maximum rotary speed of the vertical spindle: 8000 1/min X-Axis travels: 1630 mm Y-Axis travels: 762 mm Z-Axis travels: 650 mm Maximum feed rate in X-axis: 12000 mm/min Maximum feed rate in Y-axis: 12000 mm/min Maximum feed rate in Z-axis: 12000 mm/min Power of the spindle: 15 kW Taper: ISO 40 Rapid traverse X/Y/Z: 30/30/24 m/min Maximum tool diameter: 80/125 mm tool weight: 8 kg tool lenght: 300 mm Machine height: 3170 m ...

Doosan DNM 650 II Vertical Machining Center Machine is in good condition ...

• more information

achine-Details Stock-No. 1105-03801 Type of machine Machining Center - Vertical Make DOOSAN DAEWOO Type DNM 5700 Year of manufacture 2021 Type of control CNC Storage location HAGUENAU FRANCE Country of origin KORREA Delivery time IMMEDIATELY Freight basis Ex works Technical details longitudinal 1020 mm cross 570 mm vertical 510 mm Tool Changer 30 Pos. max. tool length 300 mm max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm Rapid Traverse 36 m/min Weight of the machine approx. 7 t power capacity at 100 % load 11 kW power capacity at 40 % load 12000 kW turning speed range 8000 1/min tool taper BT 40 table surface area 1200 x 500 mm groove width 18 mm ...

This Doosan DNM 4500 Vertical Machining center was manufactured in the year 2021 in South Korea. It is equipped with a Fanuc i-Series control unit and has 4 axis. The machine has a spindle speed of 12000 rpm. ...

• more information

This Doosan DNM 6700 Vertical Machining center was manufactured in the year 2016 in South Korea. It is equipped with a Doosan Fanuc i-Series control unit and has 3 axis. The machine has a spindle speed of 12000 rpm. ...

• more information