Voest DA210 - 210/48/1500 universal lathe Centre distance: 1500 mm Tip height: 210 mm Turning diameter over bed: 430 mm Swing over carriage: 280 mm Quill recording: MK4 Spindle bore: 48 mm Bed width: 330 mm Speeds: 12 Speed range: 21-1500 rpm Feed speed: 0,072-4.04 mm Metric threads: 0.5-28 mm Inch thread: 1-56 tpi Motor power: 3 kW Voltage: 400V Dimensions WxHxD: approx. 2700 x 1400 x 800 mm Weight: 1500 kg Facilities: 4 - jaw Chuck, tracking grains u.m..

Universal radial drilling machine make VOEST type AB 32Year of construction 1976Max. Drilling capacity ST: 50:32 mmMax. Drilling capacity: GG 20:40 mmDrilling ST / GG: 50/60 mmDrilling depth: 180 mmSpindle mount: MK 4Height adjustment of the boom: 610 mmProjection of the jib: 1000 mmTable surface: 1120 x 800 mm8 spindle speeds: 20 -3 000 rpm.3 automatic feeds: 0.05 / 0.1 / 0.2 mm / revDrive power: 1.5 kWWeight with base "940 kgWith- 3 automatic feeds- mot. boom stroke- Swing arm 360 °- Drilling head swiveling + 90 ° to -90 ° in the verticalxa0xa0 all 15 ° indexable, swiveling, adjustable and rotatablexa0xa0 (see brochure)- Cooling deviceused, in good conditionPrice on request.Delivery: e ...

Voest DA180-52-800 - Universal lathe - the machine is completely revamped and as good as new - CE conformity - Sino SDS6-3V 3-axis position indicator - 3-jaw lathe chuck Ø 200 mm - Multifix Type B - Coolant device - Work area lighting Specification - Center width: 800 mm - Center height: 180 mm - Turning diameter over bed: 380 mm - Turning diameter via slide: 200 mm - Quill holder: MK4 - Spindle bore: 52 mm - Bed width: 330 mm - Speed levels: 12 - Speed range: 33 - 1500 rpm - Feed speed: 0.072 - 0.54 mm - Metric threads: 0.5 - 3.625 mm - inch thread: 7 - 46 tpi - Motor power: 3 kW - Voltage: 400V - Dimensions WxHxD: approx. 2100 x 1650 x 1050 mm - Weight: approx. ...

Lead and Pull Screw Lathe VOEST DA300 Year of construction ca 1980 Turning diameter over bed 600mm Effective turning length: 1850 mm Spindle Passage: 85mm Speeds: 14 - 1000 rpm Tailstock: MK5 Reversal backlash face spindle: 0.5 mm Reversal clearance upper slide: 0.25 mm Rapid traverse bed sledge: in both directions EQUIPMENT - Multifix C - 5 steel brackets - Rotating center tip MK4 - 4 jaw chucks Ø 400mm, plus 3 sets of jaws - 3 jaw chucks Ø 400mm - 3 sets of jaws - Both linings Röhm - Fixed bezel The machine is in good condition. The machine bed is in very good condition.

Four - jaws flat disc with individually adjustable clamping jaws. Diameter: 400 mm. High, without jaws: 100 mm, with jaws: 155 mm. Through hole: 90 mm. Chuck flange: DIN 55027, Size: 6 with 4 bolts, 21.5 mm with M 12 nuts and clamping wrench Good cleaned and ready for use condition. Weight: approx. 45 kg. Shipping with forwarding possible. The part was mounted on a VOEST lathe, type: DA 210 - 250. The Planchine can be visited in consultation and is immediately available. Please also note my other entries.

Description: Turning length: 1000 mm Turning diameter over support: 240 mm Approx. Onsite Dimension. (l x w x h): 2,400 x 800 x 1,400 mm, weight approx.: 800 kg ...

• more information

Voest lathe in very good condition. Enormous amount of spare parts and additional parts included. Delivery possible immediately.  ...

• more information

Description: Speed: 14 - 1000 rpm Center length: approx. 1000 mm Center height above bed: approx. 200 mm Turning diameter over bed: approx. 400 mm Center height above support: approx. 120 mm Turning diameter above support: approx. 240 mm The machine is equipped with a tailstock, a steel holder and a three-jaw chuck Diameter: 160 mm Spindle clearance: approx. 53 mm weight approx.: 800 kg, Approx. Onsite Dimension. (l x w x h): 2,300 x 950 x 1,600 mm

Peeling and cutting tables Specialized peeling and cutting tables (with disinfection) 9 pieces The tables are rinsed using the impulse method with continuous, high-purity water ...

• more information

General SKU235U236 LocationBarneveld MakeIlchmann TypeDTSF 2x200x1.857mm Mach.No.CRO0349 Main Features Motor3 KW Length1857 mm Inlet diameter350 mm Specified Features - Horizontal screw conveyor MaterialStainless steel 1.4571 (316Ti) Horizontal conveyor screwcheck Double shaftcheck Diameterdia. 200 mm (2x) Length1875 mm Between inlet and outlet1460 mm Shaft diameter200 mm Pitch200 mm Inlet350x350 mm Outlet385x220 mm Motor3 kW, 220-230/380-400 Volt Screw speed31 rpm Information Year of construction2014 Total height0,48 m CEcheck Floorspace3,33x0,5 m Weight650 kgHorizontal screw conveyorsIlchmannConveying systems > Horizontal screw conveyorsBrand > Ilchmann What yo ...