used FANUC vertical numerically controlled machining centres

Control Fanuc ... 31i - B5 Clamping table surface ... 850x410mm Axis X ... 700mm Axis Y ... 400mm Axis Z ... 330mm Spindle speed ... 0-24000/min. controlled axes ... 5 cooling ... 35bar Spindle mounting... BBT30. Rapid traverse ... 54m/min Main engine power ... 4.7/14.2kW Max. table load ... 300kg L x W x H ... 2100x2165x2800mm Machine weight ... 2300kg Magazine slots ... 21 + Robot FANUC LR Mate 200iD The machine is in good condition, possible to test under electricity.

Machine Details Warehouse number 1105-03578 Machine Type Machining Center - Vertical StAMA ROBODRILL brand Type MC 010 Year of construction 1990 Control type CNC Storage location HAGUENAU Country of origin JAPAN Delivery time IMMEDIATELY Freight base from stock Technical details x-travel 500 mm y-travel 380 mm z-travel 300 mm Spindle holder ISO 30 sk sa Clamping surface 650 x 380 mm Tool magazine with 10 seats Tool change time 5 sec workpiece weight 200 kg Speeds - autom. switchable 60 - 8000 rpm Feed speed 1 - 4095 mm/min Feed force 400 kp (X, Y) Feed force 1000 kp (Z) Rapid traverse speed 36 m/min (X, Y) Rapid traverse speed 30 m/min (Z) Information Equipped with/ Equipped with: - FANUC 0 M Control - 10-fold tool changer SK 30 - Coolant system / cooling attachment - 4 T-slots / 4 T-slots TOOLS SK 30

Key data: 500 mm, 400 mm, 330 mm

achine details Stock-No. 1105-03933 Type of machine Machining Center - Vertical Make FANUC-STAMA Type Robodrill T14 ifb Year of manufacture 2010 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Japan Delivery time by arrangement Freight basis EX WORK Technical details x-travel 500 mm y-travel 400 mm Z-Travel 330 mm table surface area 650 x400 mm turning speed range - milling 10000 rpm power capacity - milling spindle 7,5 kW tool taper BT 30 No. of tools in the magazine 14 pieces feed range 1-12000 mm/min rapid motion -longitudinal/cross/vertical 36 m/min total power requirement 10 kW Weight of the machine approx. 2200 kg dimensions of the machine approx. 2000x2400x2600 mm Additional information CNC FANUC 31 i MB 10000 rpm spindle

Key data: 370 mm, 270 mm, 254 mm

Machine Details Stock-No. 1105-03942 Type of machine Wire Eroding Machine Make FANUC Type Robocut Alpha oid Year of manufacture 2008 Type of control CNC Storage location FRANCE Country of origin JAPAN Delivery time to be agreed Freight basis ex site Price Technical details table length 700 mm table width 400 mm Control Fanuc 310 S WA X-Axis 520 mm y-axis 370 mm U-axis +/- 60 mm V-axis +/- 60 mm Conical angle (100mm) +/- 30° Z-Axis 410 mm max. workpiece sizes 600 x 420 mm max. workpiece height 400 mm max. workpiece weight 400 kg Rapid traverse 0.9 m/min interval size of the actuator 0,001 mm wire dia. 0.1 - 0.30 mm wire speed 0 - 15 m/min wire clamping 200 - 2.500 g total power requirement ~ 14 kVA weight of the machine approx. 2.5 t dimensions of the machine approx. 3.2 x 2.5 x 2.1 m Accessories Documents electr. Hand Wheel

Key data: 700 mm, 400 mm, 330 mm

Vertical CNC Machining Center/Drill Tapping Center CNC control Fanuc 16i-MB Table size 410 x 850 mm Table load 250 kg Number of pallets: 1 X-axis travel 700 mm Y-axis travel 400 mm Z-axis travel 330 mm 4. Axis (rotary table) 4+5 Spindle mount MAS BT 30 Spindle speed 10,000 rpm Magazine capacity 21 If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other listings for a full overview of our stock.

Fanuc Robodrill a-T14 iB Vertical Machining Center Machine is in excellent condition

Robodrill MC 010 X-axis: 500 mm Y-axis: 380 mm Z-axis: 300 mm Admission in spindle (ISO): BT30 Control : Fanuc 16-M Toolchanger: yes Number of toolholders: 10 positions Number of rotations: 10 > 8000 rpm

Ref. -No.: 10370 Manufacturer: FANUC Year of construction: 1997 Type of control: CNC Control: FANUC Series 16-M Storage location: Halberstadt Country of origin: Irland X-Travel: 500 mm Y-Travel: 380 mm Z-Travel: 300 mm Machine length: 1560 mm Machine width: 2060 mm Machine Height: 2218 mm Rotary Table (Lxw): 650 x 380 mm Table Load: 200 kg Max. Tool Weight: 2 kg Max. Tool Length: 120 - 200 mm Max. Tool Diameter: 65 mm Tool change time: 1 s Tool Taper: MAS BT30, MAS P30T-1 (45°) Numbers Of Tools In Magazin: 10 Tool changer: Revolvertyp (Spindel unabhängig vom Revolver) Turning Speed Range - Stepless: 1-15000 mm / min Rapid Traverse X-Axis: 48 m / min Rapid Travel Y-Axis: 48 m / min Rapid Traverse Z-Axis: 48 m / min Weight Of The Machine Ca.: 1,7 t Max spindle speed: 8000 min⁻¹ Positioning accuracy in one direction (*1): 0,006 / 300 mm Positioning repeatability (*2): +/- 0,00 ...

Fanuc Robodrill D14LiB Plus Vertical Machining Center Machine is like new condition Table size : 850 mm x 410 mm X : 700 mm Y : 400 mm Z : 330 mm 10 pieces of tool holder, and some other tools will be given together with machine

This Fanuc Robodrill D21MiA5 Vertical Machining center was manufactured in the year 2014. It has 4 axis. The machine has a spindle speed of 21000 rpm. Open the attached PDF document to see all additional options of machine configuration (scroll down to access the document).

This Fanuc Robodrill a-T21iEL Vertical Machining center was manufactured in the year 2006 in Japan. It is equipped with a Fanuc Series 31i-A5 control unit. The machine has a spindle speed of 12000 rpm.

Description: serial no.: P014TL095 operating voltage: 400 V frequency: 50 Hz , nominal current: 17 A jib length: 380 mm , distance between table and spindle nose: min. 150 mm , distance between table and spindle nose: max. 480 mm , with ,3 slots slot width: 14H14 mm , Table height over floor: 815 mm , working spindle: , spindle bearing: 50 mm diameter , tool clamping: 2200 N , Max. tool diameter: 80 mm , Max. tool length: 250 mm , Max. feed force: , X: 2700 N , Y: 2700 N , Z: 5400 N , chiping values: , Max. milling performance: 600 cm³ Max. drill diameter: 20 mm , Max. thread diameter: M 16 , attention: without machine vices on clamping surface and without SK 30 tool holders on tool turret z-motion: 330 mm, max. workpiece weight between centers: 250 kg, x-motion: 500 mm, y-motion: 400 mm ...

good condition inspection possible video available

Controls: FANUC Series 16-M.

x-travel: 700 mm y-travel: 400 mm z-travel: 330 mm Control: FANUC 31iB5 table-size: 850 x 410 mm : 21 fach turning speeds: 10.000 U/min Internal cooling system: 20 bar total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 500 mm y-travel: 400 mm z-travel: 330 mm Control: FANUC 31i-B5 Tools changer: 14 pos. table-size: 850 x 410 mm number of spindle speeds: 24.000 U/min/rpm rapid traverse feeds: 48 m/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

FANUC Robodrill Alpha T14iB vertical machining center from the year 2000 currently working. It is equipped with a Fanuc 16i-M CNC control unit. The machine has a spindle speed of 15000 rpm. Machine weight: 2100 kg CNC

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Fanuc LR Mate 100i robot with controller and handheld It is a five-axis, modular, electrically servo-driven robot designed for loading and unloading precision machines, welding and material transport. Its hollow joint construction encloses the entire cable routing to avoid getting stuck. The FANUC LR Mate 100i also features brushless AC servo motors that minimize motor maintenance, sealed bearings and drives enable operation in harsh factory environments. Included in delivery are the control unit Mate RJ-2 and handheld A05B-2301-C335 Since the article is available several times, the year of construction may differ. Robot Specifications Axes: 5 Payload: 3kg H-range: 620 mm Repeatability: ±0.04 mm Robot mass: 32kg Structure: Articulates Assembly: Floor, inverted Movement speed of the robot J1 180 °/s (3.14 rad/s) J2 180 °/s (3.14 rad/s) J3 225 °/s (3.93 ...

Fanuc LR Mate 100i robot with controller and handheld It is a five-axis, modular, electrically servo-driven robot designed for loading and unloading precision machines, welding and material transport. Its hollow joint construction encloses the entire cable routing to avoid getting stuck. The FANUC LR Mate 100i also features brushless AC servo motors that minimize motor maintenance, sealed bearings and drives enable operation in harsh factory environments. Included in delivery are the control unit Mate RJ-2 and handheld A05B-2301-C335 Robot Specifications Axles: 5 Payload: 3kg H-reach: 620 mm Repeatability: ±0.04 mm Robot mass:32kg Movement speed of the robot J1 180 °/s (3.14 rad/s) J2 180 °/s (3.14 rad/s) J3 225 °/s (3.93 rad/s) J4 216 °/s (3.77 rad/s) J5272 °/s (4.75 rad/s) Robot Motion Range Robot J1 ±160° J2 +150° - 35° J3 +206° - 159° J4 ±120 ...

Spare parts from a Fraesmaschine Webo Roeperwerk type Gradumat Table size approx. 1250*1000mm, complete control Fanuc Y.O.M. 1987 such as board control panel, glass mass staebe, servoverstaerker, motors, ball roller spindles, feed motors, uvw. Price on request No more vertical head. Special price

We provide the following to the purchase : manufacturer Fanuc suitable for model series P-200 Shipping costs on demand with us:; Second Hand

Capacitive: 60 kg 6 axes simultaneously controlled by Fanuc Teach-In System ; Very good

1 x Fanuc Back Plane 3 Slot A05B-2316-C105 1 x Fanuc A16B-3200-0042/05B900514 Board 1 x Fanuc A16B-1 212-0871/17C906140 Power Supply Board Alternative search terms A05B2316C105 A16B3200004205B900514 A16B1212087117C906140 A16B-3200-0042 A16B-1212-0871 A16B12120871.br/> .br>.br/>>A16B32000042.br/>.br/>.br/>.br/>.br/>.br/>.br/>.br/>.br/>

Capacity : 60 kgs. 6-axis simultaneously controlled by Fanuc Teach-In System ; Very good