We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Control Fanuc Travels X / Y / Z: 520 x 370 x 410 mm Travels U / V: 120 x 120 mm cooling unit
used
Inv. Num. : 6587 Type: A04B-0239-B032 Producer: Fanuc Created: 1990 Parameters: The machine is in good technical condition.
used
Key data: 320 mm, 220 mm, 180 mm
Inv. Num. : 6869 Type: Robocut 0iA Producer: FANUC Created: 2000 Parameters: Control system: FANUC Max. travel length of the X-axis: 320 mm Max. travel length of the Y-axis: 220 mm Max. travel length of the Z-axis: 180 mm Feed length in the U-axis ( -): 120 mm Feed length in the V-axis ( -): 120 mm Machine weight: 1200 kg
used
CNC Wire EDM Machine FANUC MATRA ROBOCUT a-1iA5 Year of construction 2001 Travel: X-axis 520 mm Y-axis 370 mm U-axis 120 mm V-axis 120 mm Z-axis 310 mm Max. workpiece dimensions: 790 x 730 x 300 mm Max. workpiece weight 1,000 kg Wire diameter 0.1 to 0.3 mm Wire feed speed 250 to 2500 g Max. taper angle +/- 30°/ 80 mm Control: FANUC Series 16i-W Machine weight: approx. 2,600 kg
used
Key data: 370 mm, 270 mm, 255 mm
Inv. Num. : 7378 Type: ROBOCUT Alpha-0iE Producer: FANUC Created: 2013, GO 2020 Parameters: Control system: FANUC Max. travel length of the X-axis: 370 mm Max. travel length of the Y-axis: 270 mm Max. travel length of the Z-axis: 255 mm Feed length in the U-axis ( -): 60 mm Feed length in the V-axis ( -): 60 mm Minimum wire gauge: 0.1 mm Maximum wire thickness: 0.3 mm Max. workpiece dimensions: 700 x 600 x 250 mm Max. workpiece weight: 500 kg Machine height: 1950 mm Machine length: 2200 mm Machine width: 1930 mm Machine weight: 1200 kg Equipment: Measuring instruments Software
used
Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Ampere: 0 A CNC Brand: 0 CNC Model: 0 Control: FANUC Series 16-W Technical data Max. dimensions of work piece: Length: 650 mm Width: 420 mm Height: 160 mm Table load max.: 250 kg Longitudinal traverse (X-axis): 320 mm Cross traverse (Y-axis): 110 mm Vertical travel (Z axis): 180 mm U axis: 120 mm V-axis: 120 mm Rapid traverse:: 900 / 450 mm/min Total volume of dielektric: 260 l Voltage 50 Hz 3x: 400 Volt Total power required: 11 kVA Machine´s weight about: 1500 kg Overall dimensions machine: Length: 1800 mm Width: 1600 mm Height: 2000 mm
used
This FANUC Robocut ALPHA-0B Erosion machine was manufactured in the year 1995. It is equipped with a Fanuc Series 16-W control unit and has 4 axis. The machine has a wire tension: 0-2500 g.
used
This FANUC Robocut Alpha 0iE CNC Wire Cut EDM Machine was manufactured in 2013 and is equipped with a FANUC 31i-WA control. It has 5 axes (X-axis: 370 mm / Y-axis: 270 mm / Z-axis: 255 mm / U-axis: 60 mm / V-axis: 60 mm) and can operate with a maximum workpiece weight of 500 kg. In total it has operated 17,500 hours from which 4,850 are cutting hours.
used
This FANUC Robocut α-1iA erosion machine was made in the year 2000 in Japan. It is equipped with a Fanuc Series 18i-W control unit. The machine has a max work table load of 1000 kg.
used
For sale wire EDM fanuc tape cut - w2 Year 1989 Kept and running well available immediately for viewing
used
Fanuc W3 wire EDM machine Journeys: X-750, Y-450, Z-300, U-50, V-50 Max cutting angle: 10 degrees Max workpiece weight: 800 kg Programmable axes: X, Y, Z, U, V Max dimensions of the detail - 700 x 950 x 300
used
X axis: 550 mm Y axis: 370 mm U axis: 120 mm V axis: 120 mm Z axis: 310 mm Fast forward (X, Y, Z / U, V): 900 mm / min / 450 mm / min Max work piece weight: 1000 kgs Power: 13 KVA Year 2002 Equipped with: Control: FANUC 180 iS-W Refrigerator: Yes
used
Manufacturer: Fanuc Year of manufacture/SO/GO: 2000/-/- The machine is in good technical condition.
used
Type: MATRA TAPE CUT W2 Parameters: 500 mm, 350 mm Manufacturer: Fanuc Year of production / SO / GO: 1991 / - / - Description: The machine is in good technical condition. X-axis travel: 500 mm Y-axis travel: 350 mm Z-axis travel: 300 mm Voltage: 200V AC + -10%; three-phase; 50 / 60Hz Cooling water temperature: 10-25 ° C Water flow: 15-35 liters / minute Sold including: 1st filter SW37 D340xd46xH450mm - 3pcs 2.Savah RVH600 - anti-rusting workpiece - 5 liters 3.Eleion plus - resin to reduce the conductivity of working water - 50 liter barrel - full up to 3/4 volume 4. Various small spare parts - see. photo- Dimensions L x W x H: 3500 x 2400 x 2400 mm Weight: 2300kg Upon agreement, the possibility of a tour in progress.
used
Description: Control: CNC FANUC 16W Automatic threading Maximum workpiece dimensions: 650 x 420 mm Maximum workpiece thickness: 160 mm Max. workpiece weight: 350 kg Stroke (X-,Y-,Z-axis): 320 x 220 x 180 mm Table displacement speed: 900 mm/min Wire unwinding speed: 0 - 10 m/min Wire tension: 80 to 2500 gr Wire guide: Ø 0.25 mm Container capacity: 260 l Accessories: Cooling unit Lubrication tank with pump Documentation weight approx.: 1,900 kg, Approx. Onsite Dimension. (l x w x h): 3,200 x 2,200 x 2,000 mm
used
Fanuc Robocut alpha-C600ib EDM Wire Cutting Machine Machine is in very good condition Maximum workpiece dimensions [mm]: 1050 Ã 820 Ã 300 Maximum workpiece weight [kg] : 1000
used
FANUC ALPHA C600iA - 2014 Wire cutting EDM machine
used
[embed]https://youtu.be/tU4z-j-vDnw[/embed] FANUC ALPHA 0iB - 2003 Wire cutting EDM machine
used
Fanuc Laser-model C3000 Type A04B-0811-B311 44 kVa - 130 amp Type A04B-0811-B511
used
CNC control in the control panel / machine operator terminal CNC web control FANUC type A14B - 0048 - 0002 Year of construction: 1990- Machine control panel - electronic handwheel - Flexible silicone PC keyboard Dimensions WxHxD: 600 x 260 x 350 mm Weight: approx. 40 kg From stock, function not tested, ideal as spare parts carrier.; used
used
Fanuc Robodrill Alpha-T14ifb Tapping Machine 10000 rpm 5 inches diving head(Nikken) Machine is in good working condition
used
Description: clamping force: 350t daylight: 1250 minimum mold thickness: 300 - 650 tie bar spacing: (H x V) 810 x 710 platen size: (H x V) 1130 x 1030 clamp stroke: 600 ejector stroke: 200 ejector rod diameter: 28 mm screw diameter: 56 mm maximal injection volume: 640 ㎝³ maximum injection pressure: 225 MPa number ,of strokes approx. 3,500,000 number ,of injections is approx. 2,700,000 locating ring diameter (F:M) 160 hydraulic core (Fixed/Move) 0/0  , on switchboard picture are red marked modules that are missing in the machine machine was in operation before the cards were removed machine will be delivered with ,documentation, backup data not available, can be obtained from FANUC  , please also have a look at the PDF documents of this ,machine Approx. Onsite Dimension. (l x w x h): 8,000 x 2,750 x 2,000 mm, weight approx.: 14,600 kg
used
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Fanuc LR Mate 100i robot with controller and handheld It is a five-axis, modular, electrically servo-driven robot designed for loading and unloading precision machines, welding and material transport. Its hollow joint construction encloses the entire cable routing to avoid getting stuck. The FANUC LR Mate 100i also features brushless AC servo motors that minimize motor maintenance, sealed bearings and drives enable operation in harsh factory environments. Included in delivery are the control unit Mate RJ-2 and handheld A05B-2301-C335 Since the article is available several times, the year of construction may differ. Robot Specifications Axes: 5 Payload: 3kg H-range: 620 mm Repeatability: ±0.04 mm Robot mass: 32kg Structure: Articulates Assembly: Floor, inverted Movement speed of the robot J1 180 °/s (3.14 rad/s) J2 180 °/s (3.14 rad/s) J3 225 °/s (3.93 ...
used
Fanuc LR Mate 100i robot with controller and handheld It is a five-axis, modular, electrically servo-driven robot designed for loading and unloading precision machines, welding and material transport. Its hollow joint construction encloses the entire cable routing to avoid getting stuck. The FANUC LR Mate 100i also features brushless AC servo motors that minimize motor maintenance, sealed bearings and drives enable operation in harsh factory environments. Included in delivery are the control unit Mate RJ-2 and handheld A05B-2301-C335 Robot Specifications Axles: 5 Payload: 3kg H-reach: 620 mm Repeatability: ±0.04 mm Robot mass:32kg Movement speed of the robot J1 180 °/s (3.14 rad/s) J2 180 °/s (3.14 rad/s) J3 225 °/s (3.93 rad/s) J4 216 °/s (3.77 rad/s) J5272 °/s (4.75 rad/s) Robot Motion Range Robot J1 ±160° J2 +150° - 35° J3 +206° - 159° J4 ±120 ...