Overview This labeller was built in 2014 by Italian manufacturer Framax. It is an automatic rotary self-adhesive labelling machine for glass bottles with a capacity up to 4,000 bottles per hour.  Techn. Details  Capacity: up to 4,000 bph (0,33l glass bottle, wrap-around label) 2 labelling stations  Max. height of the paper passage 200 mm Max. speed of the output of the paper: 32 m/min. Max. roller outer diameter 300 mm Max label length 180mm Voltage: 400V, 50 Hz  Stainless-steel pass-through conveyor belt (2.500 mm) Stop of the machine in case of container jam-up Low wear and noise levels due to alternated steel and zellamid transmission gears Self-adhesive labelling station speed variat ...

Used Hosokawa Cone M ischer 0.4-LFC-41 Volume at water filling 40l Usable volume approx. 34l All parts in contact with the product are made of stainless steel. The container has a jacket with a working temperature of max. 160°C and a pressure of max. 6 bar Max product temperature 110°C working pressure atmosphere The mixer is in good condition, but has not been revised or overhauled.

Overview  The labeler was manufactured in 2021 by the German company ALWID. It is part of a new filling line and can fill chemical products into plastic containers. The machine has ATEX certification, which allows it to process explosive products. The machine can be purchased with warranty.  Technical data  Tandem version consisting of  4 x SES-120III mounted on the left  2 x SES-120III mounted on the right Max. label height 120 mm Max. container dimensions: Height: 50-300 mm Ø: 20-100 mm Control Siemens S7  Control box IP 54 splash-proof / stainless steel version Photocell for label scanning wide fork width Device for label control  Fully automatic tandem changeover / pneumatic Auto ...

Overview  The labeler was manufactured in 2013 by the German manufacturer Gernep. The machine was regularly maintained by OEM and had a full renovation in the end of 2019. The labeler is already dismantled. Technical details  Output: approx. 8,500 bottles/h   Formats 33 cl Vichy – Longneck – 30 cl BNR ; Neck, front and back label. 2 different front label format parts 33 cl longneck; 75 cl Bierre Belge bottle Corked; Neck, front and back label. Stainless steel bottom frame Rotation: clockwise Right to left bottle transport 5912 running hours Air driven glue pumps replaced by electrical driven glue pumps.

Overview  The labeler was built in 1990 by the German manufacturer Krones. It is in a good condition.  Technical data: Capacity: 3.000 bph  Glue: cold glue Working hours  7,932.45   Formats Bordeaux bottle 0,75l: label, back label, tie band  1,00l: label  Number of bottle plates: 6 Pitch circle diameter: approx. 235 mm Techn. documentation available Glue roller is made of rubber-coated steel 

Overview  The machine was built in 2004 by the German manufacturer Langguth and is completely overhauled. The pictures do not correspond to the actual machine, but are well comparable and representative.  Technical data  Gluing height up to 210mm Completely overhauled as shown on the pictures, but with base frame made of steel. Including 2 bottle formats+ 2 label formats Optional with take off turntable

Overview The KHS Innoket Roland 16/4 H labeling machine was previously used in a brewery. There it was operated in single-shift operation. Since the sales volume has decreased, the beer of the brewery is now bottled at another location and this bottling line has become available. Due to the low number of operating hours and regular maintenance, the machine is in very good condition. Both wet glue and self-adhesive labels can be processed on the machine. The bottle plates are driven by servo motors. Tech Specs: Output: max. 18,000 bph Labels: self-adhesive labels and wet glue labels Bottle formats: 0.5l NRW Special: Other formats are available, as jam jars and spirits bottles were also labele ...

Overview  The machine was built in 1999 by the German manufacturer Anker and is overhauled. The machine has run only a few hours a year and is therefore in good condition.  Technical data  Front label (belly+ chest wet glue), back label (wet glue) Running direction: right - left  Complete documentation  With a new bottle format and 2 new label formats  Freely selectable label dimensions

Overview  The labeler for sleeves was manufactured in 2008 by the German manufacturer Krones. With a max. output of 18,000 bph, 0.25, 0.5 & 1.25l have been processed recently.  Techn. details  Capacity: 18.000 cans/ h  Formats processed: 0.25l - 0.5l - 1.25l  Container: bottles, cans Number of heads: 1

Overview The labeler was manufactured in 2007 by the Italian company SACMI. It is located at a Spanish machine manufacturer. The machine is in good condition. Technical data  Capacity: 7.000 containers/h (with 5l-container)  Formats: 5l, 8l, 10l Direction of rotation: clockwise Number of bottle holders: 6  Hot glue and pre-cut paper labels One labeling station