X=3500mm Y=2000mm Z=1250mm W=800mm H=360° spindle 130 mm, ISO 50, max. 1600 rpm table 1600 x 1800 mm with a load of 12000 kg with Siemens electric and CNC Heidenhain TNC 415B Oil cooled: Schimpke. Dismantled. The machine has been used very little = in very good technical condition.  ...

• more information

equipped with ATC = automatic toolchanger with 60 positions equipped with AVO = device for automatic pallet/table changer Transversal movement of table (X): 2000 mm Vertical movement of headstock (Y): 1250 mm / 1150 with pallet Horizontal movement of the stand (Z): 1000 mm Movement of spindle (W): 500 mm with Heidenhain measuring probe Longitudinal travel X-axe: 2000 mm Cross travel Y-axe: 1250 mm Travel Z-axe: 1000 mm Dimensions clamping space- table: 1400 x 1250 mm Power on spindle: 37 kW Admission in millinghead (ISO): ISO 50 (dia 125 mm) Max speedrange: 10 > 2800 rpm Control: Heidenhain TNC 426 Power needed (KVA): 78 kVa / 82 kW

spindle diameter: 130 mm x-travel: 3500 mm y-travel: 2000 mm z-axis: 1300 mm Table dimensions: 1800x1800 mm Control: ECS 2101 number of spindle speeds: 12,5 - 800 (63x) voltage: 380 V Control: total power requirement: 25 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC control HEIDENHAIN TNC 355 Spindle diameter 100 mm x-travel 1130 mm y-travel 1250mm z-travel 950 mm Flange diameter of the hollow spindle 221.44 mm Table clamping area 1120 x 1000 mm Spindle mount ISO 50 size Mass of the workpiece 3000 kg Quill stroke 650 mm Spindle speeds 0 - 1500 rpm Feed speeds 4 - 2500 mm / min Rapid traverse 4.5 m / min Total power requirement 32kVA Weight of the machine approx. 14 t Dimensions L x W x H 4.75 x 2.45 x 3.03 m

Inv. Num. : 6345 Type: WHN 13.4.C Producer: TOS Produced: 1988 Parameters: Control system: MEFI CNC 836 Work table length: 2200 mm Work table width: 1800 mm Spindle drive power: 37 kW Maximum spindle speed: 2800 1/min Travel X-axis: 2000 mm Travel Y-axis: 1600 mm Travel Z-axis: 1200 mm Machine weight: 32.000 kg Replaced ball screw. Measurement of each ESSA axis separately. Drive for each XYZ axis.

Inv. Num. : 6702 Type: WHN 9B Producer: TOS Created: 1975 Parameters: X-axis travel: 1250 mm Y-axis travel: 900 mm Z-axis travel: 1000 mm Equipment: DRO  ...

• more information

Inv. Num. : 6737 Type: WHN 11 Producer: TOS Created: 1970 Parameters: Working table length: 1250 mm Working table width: 1250 mm Maximum table load (uniform): 8000 kg Maximum spindle speed: 900 1/min X-axis travel: 1600 mm Y-axis travel: 1250 mm Z-axis travel: 1000 mm Spindle power: 34 kW Spindle diameter: 110 mm

Inv. Num. : 6762 Type: WHN 9 B Producer: TOS Created: 1975 Parameters: Repair history: 30.8.2021: Repair of the rotary table 31.5.2021: Repair of the lubrication system for guide surfaces 18.02.2021: Adjustment of the rotary table coupling 22.10.2020: Replacement of the sealing elements of the hydraulic cylinder of the tool clamping Replacement of the tool support bearings Replacement of hydraulic hoses for tool clamping 21.10.2019: Replacement of the electromagnetic clutch 09.10.2019: Brush holder - carbon 31.1.2017: adapted quick-shift clutches with replaced spark plugs and shift knobs on the "Y" axle 11.03.2017: Lockshift clutch

Inv. Num. : 6957 Type: WHN 13 Produzent: TOS Erzeugt: 1976 Parametern: Arbeitstischlänge: 1800 mm Arbeitstischbreite: 1800 mm Maximale Tischbelastung (gleichmäßig): 120.000 kg Verfahrwege X-Achse: 3000 mm Verfahrwege Y-Achse: 2000 mm Verfahrwege Z-Achse: 800 mm Spindeldurchmesser: 130 mm DRO

spindle diameter: 130 mm x-travel: 3500 mm y-travel: 2000 mm z-axis: 1250 mm w-axis: 800 mm b-axis: 360 ° output: 85 KVA table-size: 1800x1800 mm table load: 12 t spindle taper ISO: 50 table rotation: 360x0,0001 ° spindle motor: 37 kW spindle turning speed range: 1500 U/min feed range: 4-8000 mm/min electrics - voltage/frequency: 400 / 50 V/Hz weight of the machine ca.: 35 t dimensions of the machine ca.: 7x7x6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.