Hot-dip galvanized steel hall [hL53.6m x hW15.6m x dH6.5m / fH7.6m] dismantled from stock. HALL STRUCTURE: the hot-dip galvanized primary structure consists of 9 main frames (IPE 450 frame columns, IPE 300 frame trusses) as well as 2 lightweight end wall constructions (HEA 140 corner supports, HEA 160 internal supports, HEA 120 gable wall transoms) of steel grade S 235 JRG2 (St 37), and the secondary structure consists of hot-dip galvanized lightweight profiles, i.e. roof purlins such as eaves purlins made of Sigma profile SE250/100/30/15/2.5 mm and C-profile wall beams C+150/90/43/15/3 mm of steel grade S355 JRG3 (Lv. 52). The bracing consists of pressure pipe diameter 70 x 2.6 mm as well ...

It is a used but durable hall construction which could also serve as a ball sports / football hall, equestrian sports hall and much more in the future. The steel frames are self-supporting and have a height of almost 11 meters in the ridge (in the middle). APPROXIMATE DIMENSIONS: Floor area: 2560 sqm built-up BG area; | Hall length: 65.50 m AK wall + boiler room; | Hall width: 39.09 m AK wall planking; | Eaves Height: 4.27m UK Roofing; | First - Height: 10.70 m OK Roofing; | Roof pitch: 18.75 degrees sym. gable roof; | STRUCTURE: Solid, articulated steel frame construction, with steel frames made of rolled sections mounted on point foundations or rails. The end frames ...

Option to purchase a hall ensemble of approx. 6000 m2 in total (90 x 66 x 6.3 / 8.3 m) or parts thereof. 3-span steel hall in portal construction, which will soon be dismantled. It is a thermally insulated hall, whose supporting structure and most of the cladding as well as various accessories can be reused. APPROXIMATE DIMENSIONS Covered area: approx. 6000 m²; Width of the hall: approx. 66.40 m AK wall Wingspans: approx. (15 + 15) + 15 + 21 m center-center supports; Length of the hall: approx. 90.40 m AK wall; Frame spacing: approx. 5.00 m MM truss; Eaves height: approx. 6.30 m at the intersection of roof and wall; Ridge height: approx. 8.30 m building height;  ...

Production hall hbs780s and warehouse hbs645s, which are to be dismantled in the short term. These are thermally insulated halls whose supporting structure and cladding as well as various accessories can be reused. Production hall hbs780s GFA area: approx. 780 m²; Hall width: approx. 30.00 m AK façade; Hall length: approx. 26.00 m AK façade; Frame spacing: approx. 5.60 m MM truss; Eaves height: approx. 7.75 m OK purlin; STRUCTURE: The primary structure consists of hot-rolled Euro profiles. The secondary structure to accommodate the building envelope consists of cold-formed steel profiles made of galvanized strip steel. ROOFING: Sandwich panels, grey-white, on ...

For sale is a hot-dip galvanized primary construction of a hall structure (hL24m x hW17m x dH4.6m) from an unrealized construction project. The roof purlins and wall beams which were planned as a secondary construction are not part of the offer. System length: 24.00 m; System width: 17.00 m wingspan; eaves height: 4.60 m; ridge height: 6.85 m; roof pitch: 15 degrees; PRICE: on written request with complete company / contact details.

It is a thermally insulated lightweight hall (built in 2008), whose hot-dip galvanized supporting structure and sandwich cladding together with various equipment can be reused. DIMENSIONS according to construction documents: Covered area: 375.00 square meters; Width of the hall: 25.00 m AK wall; Length of the hall: 15.00 m AK wall; Frame spacing: 5.00 m MM frame supports; Eaves height: 5.24 m at the intersection of roof and wall; Ridge height: 7.30 m building height; Purlin spacing: 2.50 m floor area / 2.54 m roof pitch; Wall beam spacing: 2.50 m; Roof pitch: 10 degrees, symmetrical gable roof; LOAD ASSUMPTIONS: Wind load: 0.59 kN/m2 (DIN 1055-4 March 2005). S ...

General SKU404U1229 LocationBarneveld MakeLudwig Edel No.85 250/1 Year of construction1986 Pressure Working pressure2 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Volume2500 Ltr. Motor1.1 KW Specified Features - Stainless Steel Reactor MaterialStainless steel 1.4571 (316Ti) Stainless Steel Reactors ReactorBioreactor Capacity2500 Ltr. (max. 3500 Ltr.) Vessel sizesdia. 1600x1970 mm Dished bottomcheck Dished top sidecheck ManholeDN100 Top connectionsDN25, DN40 (2x CIP) OutletDN50 Half coil jacketedcheck Max. temperature-5 °C With propellor stirrercheck (magnetic) Motor1,1 kW Speed mixing shaft1400 rpm Information Mo ...

General SKU305U615 LocationBarneveld MakeSTC Engineering GmbH TypeReaktor 6500LTR No.6004 Year of construction2005 Pressure Working pressure0.2 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Volume6500 Ltr. Motor7.5 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity6500 Ltr. Vessel sizesDia. 2000x2534 mm Dished bottomcheck Dished top sidecheck ManholeDia. 450 mm Top connectionsDN200, DN100, DN50(4x) OutletDN80 Half coil jacketed45,5Ltr Max. temperature-20/160°C With paddle stirrercheck EKATO, Type: HWL2080 Motor7,5kW, 380-420/655-725Volt, 1440rpm (EX) Speed mixing shaft46rpm Stainless Steel Reactor ...

General SKU404U1220 LocationBarneveld MakeAlbi Alois Binderberger No.1634 Year of construction1999 Pressure Working pressure2 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Volume2500 Ltr. Motor1.1 KW Specified Features - Stainless Steel Reactor MaterialStainless steel 1.4301 (304), Stainless steel 1.4571 (316Ti) Stainless Steel Reactors ReactorBioreactor Capacity2500 Ltr. (max. 3400 Ltr.) Vessel sizesdia. 1600x1970 mm Dished bottomcheck Dished top sidecheck ManholeDN100 Top connectionsDN25, DN40 (2x CIP) OutletDN50 Half coil jacketedcheck Max. temperature130 °C With propellor stirrercheck (magnetic) Motor1.1 kW Spee ...

General SKU404U1218 LocationBarneveld MakeBertsch No.9484 Year of construction1989 Pressure Working pressure0.5 Bar Working pressure jacket6 Bar Main Features MaterialStainless steel Volume12500 Ltr. Motor4 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity12500Ltr (max. 16110Ltr.) Vessel sizesdia. 2500x3776 mm Dished bottomcheck Dished top sidecheck Manholedia. 500 mm Top connectionsDN40, DN25 OutletDN80 (2x) Half coil jacketedcheck (213 Ltr.) Max. temperature100 °C (vessel) With paddle stirrercheck (TMR Turbo) Motor4 kW Speed mixing shaft15-63 rpm Stainless Steel Reactors MaterialStainless steel 1.4571 (316Ti) Information Mounted on legsch ...