General SKU430U1380 MakeHOF Sonderanlagenbau GmbH No.GT-26049 Year of construction2007 LocationBarneveld Main Features MaterialStainless steel Surface0.74 m2 Specified Features - Freeze dryer Freeze dryervacuum dryer Cooling surface0,74 m² Number of plates6 Plate sizes620x320 mm Between the plates120 mm With cooling compressorcheck Cooling mediumR404a MaterialStainless steel 1.4571 (316Ti) With jacketcheck General With switchgearcheck Floorspace2,7x1 m Total height2 m Weight2400 CEcheck Extra SpecificationsVolume of the drying chamber: 340 LPressure range of the drying chamber: -1 / +0.01 barThe freeze dryer is equipped with a vacuum pump:Brand: PfeifferType: DUO 2 ...

Technical data capacitor volume flow max.: 300m3/h capor-mass max in delivery state: approx. 430mm x1610 mm high Cylindricher part: approx. 273 mm weight of the chamber in delivery state: approx. 80 kg content upper part (capacitor): approx. 30L content lower part (template) approx. 28 L material Elastomers: NBR/FKM/PTFE Temperature capacitor max: 1 to 80C capacitor vacuum max: 0 to 1000 mbar (absolute) (capacitor not suitable for overpressure) Temperature exchanger max: 1 to 80C operating equipment Exchanger: water pressure exchanger max: 10bar material exchanger: CU-tinned material capacitor: stainless steel Technical questions or other construction equipment please on request.; ready  ...

ZRVL-300 M single-stage oil-lubricated rotary vane vacuum pump 3-phase, 7.5kW 300m3/h The vacuum pump purchased for a project and then not used is available unused/as good as new Overview technical data ZRVL Type: M300E - Pumping speed: 300 [m3/h] - Ultimate pressure: 0.1 [mbar abs] - Final pressure gas ballast 0.7 [mbar abs] - Voltage 50 Hz: 230/400 V - Motor 50 Hz: 7.5 kW - H2O compatibility: 5.7 kg/h - Oil volume: 6.5 l - Weight: 200 kg - Sound pressure level: 70 dB (A) Accessories/equipment for the ZRVL series: Inlet filter with filter cartridge made of polyester or stainless steel Oil level switch Inlet pressure gauge Oil temperature switches or transmitt ...

Busch Vacuum Pump Type NS0600B DZ sporadically used Built: 2016  ...

• more information

Technical data capacitor volume flow Max: 300 m³/h Capacitor size max in the delivery State: CA. 430 mm x 1610 mm high cylindrical part: approx. Ø 273 mm weight of the Chamber in the delivery State: approx. 80 kg Contents upper part (capacitor): approx. 30 L Content bottom (template container) approx. 28 L Materials elastomers: NBR/FKM/PTFE Temperature capacitor max: 1 ° to 80 ° C condenser vacuum max: 0 to 1000 mbar (absolute) (Suitable capacitor for overpressure!) Tauscher max temperature: 1 ° to 80 ° Equipment heat exchangers: Water Tauscher max water pressure: 10 bar Tauscher material: CU tinned Material capacitor: stainless steel Technical questions or other sizes on ...

General SKU347X812 LocationBarneveld CEcheck MakeStephan TypeUM 60E Pressure Vacuum possiblecheck Main Features MaterialStainless steel Volume72 Ltr. Motor0.37 KW Specified Features - Cutter Bowl cuttercheck Capacity72 Ltr. Diameter500 mm Depth360 mm Knife diameter330 mm Number of knife blades2 With scrapercheck With hoppercheck Inletø 150 mm Can be tiltedcheck With jacket7,5 Ltr. Max. temperature95 °C Motor0,37 kW, 220—240/389—415 V, 1380 rpm Speed31 rpm MaterialStainless steel 1.4301 (304) With jacketcheck General No.732849 Year of construction2008 Mounted on framecheck With switchcheck Floorspace0,90x0,65 m Total height1,80 m Weight200 kgCuttersS ...

Offer Stephan micro-cut type: MCHD 180 year: approx. 2003 -Drive: 95 KW - 50 Hz - output per hour worked: approx. 2500-up to 8500 kg (product dependant) funnel version with screw on the motor shaft - cutting set diameter: 180 mm - including a new set of cutting (cutting heads: level 1, Z 24;) Level 2, no. 24) (cutting rings: 2 x MCH-D 180, gap size on request from 0.2 mm to 3.0 mm) price of the machine including a new blade set: 42.900,00. Price 34.900,00 the machine without a blade. Warranty: 3 months, excluding wear parts electro-no metal abrasion

If you have any questions: 01718367957  ...

• more information

Double-end tenoner, edge processing machine, flush cutter, edge cutter, spindle motor, milling motor -Manufacturer: Paul OTT, milling unit from edge banding machine U 206 -Milling motors: Stephan type ZBXD90L20-2 gearbox BMB 46 -Power: 2.2 kW -Speed: 12155 rpm -Cutter width: 30 mm -Adjustment range: 0 - 70 mm -Dimensions: 460/370/H570 mm -Weight: 89 kg

Type: VM 1500, capacity: 1500 liters, jacketed tank with agitator, cooling/heating capability, agitator power: 7.5 kW, Rietschle vacuum pump, capacity: 21m3/h, power 1.5 kW, Schema Hydraulik hydraulic pump, power: 1.5 kW, new touch control panel Mixer Indu IMAX 500. Can be connected to a through cutter.