Vertical band saw MÖSSNER type Rekord SM 420 Masch. No. 25615 Year of construction 1983 Roll diameter 420 mm Projection in width 410 mm Projection in height 295 mm Table size 600 x 600 mm Belt speed 12-375 m/min. 8 steps Saw blade length min/max. 3150 / 3260 mm Drive power 1.1 / 1.7 kW Mains connection 380 Volt, 50 Hz - Butt welder IDEAL BSO / 16 with scissors and whetstone - 4 gear stages + 2 engine speeds - Belt guidance Height adjustment with handwheel - Work table tiltable +/-45 - Work table tiltable 10- Foot switch for on-off Space requirement L x W x H 1000 x 800 x 1970 mm Weight approx. 600 kg very good condition; used

Connected load: 2kVA, an inspection is possible. ...

• more information

Technical data:-Roll diameter 420 mm -Throat depth 410 mm -Max volume height 265 mm -Table size 600 x 600 mm -Table li. + re. Tiltable 15 / 30 ° -Table height 1020 mm -Blade length 3150-3260 mm -Saw band width 3-16 mm -8 speeds 12-375 m / min -Drive: 400 V / 1.1 / 1.7 kW -Weight approx. 650 kg -Space requirement approx. B 900 x H 1900 X 1000 mm -with: - blade welding machine in the machine base - grinding wheel and lamp -Scissors, air pump and lighting

Cutting speed:-3 gearbox stages + Variogetriebe 15-940 m / min -Overdrive 2350 m / min Plate B x T CA 700 x 600 mm RADIUS approx. 480 mm Cutting height Max approx. 360 mm Space requirements, B x T x H approx. 1.1 x 0.8 m estimated approx. weight 1 to Equipment:-rubber of the two rollers is in good condition -IDEAL band sealer - table Tiltable

Used Vertical band saw, make MÖSSNER, good, electrically connected Model SM 420 Masch.-No. 20313 Built in 1972 Technical data: 8 cutting speeds: 12 - 375 m/min Support table B x T approx. 600 x 600 mm Discharge approx. 410 mm Cutting height max. approx. 260 mm Space requirement , W x T x H approx. 1 x 0.8 x 1.95 m (height incl. 9 cm eye screw) Weight estimated approx. 0.6 to Facilities: both rollers are "newly rubberized" / re-occupied IDEAL Tape Welding Machine Table tilted

Used Vertical band saw, make MÖSSNER, good, electrically connected Model SSF/500 Masch.-No. 11502 Built in 1963 Technical data: Cut: - 3 gear stages + Vario gearbox 15 - 940 m/min - Fast response 2350 m/min Support table B x T approx. 700 x 600 mm Discharge approx. 480 mm Cutting height max. approx. 360 mm Space requirement , W x T x H approx. 1.1 x 0.8 m Weight estimated approx. 1 to Facilities: Rubbering of both rollers is in good condition IDEAL Tape Welding Machine Table tilted

Description Universal Vertical band saw of the brand Mössner suitable for tooling, fixture construction, training as well as mold making Extension: 280mm Cutting speed: 24 - 558 m/min Description : The machine comes from a tool factory and has been regularly serviced and has few operating hours. Technical data Year built / YOM 1973 Cutting speed / Cutting speed 24 - 558 m/min Extension / swing 280mm Feeds no Table / Table 500x400mm Machine Weight /Weight ca 350kg Wheel Diameter / Wheel Slide 300mm Dimensions / Dimension 850 x 500 x 1,450 mm

specifications: - Roll diameter 420 mm - Projection 410 mm - maximum passage height 265 mm - Table size 600 x 600 mm - Table li. + re. swivel each 15 / 30 ° - Table height from the floor 1020 mm - Saw blade length 3150 - 3260 mm - Sawing bandwidth 3 - 16 mm - 8 Cutting speeds approx. 18 - 562 m/min - Drive 400 V / 1.1 / 1.7 kW - Weight approx. 650 kg - Space required approx. W 900 x H 1900 x D 1000 mm - E. foot button

Vertical bandsaw Fabr. Mössner type SSF 1050Machine -No: 25331 Year 1982xa0xa0xa0xa0xa0Technical specifications:Projection: 1050 mmCutting height: 550 mmRoll diameter: 500 mmHeight clearance table / band saw guide: 530 mmProjection in width over 2 rolls: 485 mm: over 3 rolls: 1050 mmSaw band length over 2 rolls: 3920 mm:: over 3 rolls: 5250 mmSaw band width :: 3 - 20 mmTable size (worktable): 750 x 1050 mmTable size (additional table): 450 x 450 mmTable tilt :: 2 u. 4 sided 15 inclinablestepless cutting speed: 15 - 940 m / min.Cutting speed overdrive: 2350 m / min.Max. Melting height: 15 mmDrive power: 4.0 kWWeight approx: 1740 kgExternal dimensions approx: 2100 x 1000 x 2100 mmWith- Band s ...

Vertical metal band saw machine MÖSSNER type SM 420Masch. -No: 19357 Year of construction 1971Technical specifications:Roll diameter: 420 mmCutting height: 265 mmThroat: 410 mmSaw band length: 3150 - 3260 mmSaw band width: 3 - 16 mmTable size: 600 x 600 mmTable inclination: 30/15 °8 band saw speeds: 12 - 375 m / min.Table height: 1020 mmDrive power: 1.1 / 1.7 kWWeight: approx. 590 kgExternal dimensions approx: 980 x 870 x 1850 mmWith- Band saw welding machineused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are ...