ARBURG injection moulding machine Type: 420 V 800-150-150 2Component, with turntable controller: SELOGICA year: 1998 Clamping unit Clamping force t Gap between 80 mm: 500 Holm dimension mm: 420 x 420 min/max height mm: 250 Plate size: 545 x 545 Injection unit Screw diameter mm: 25/25 Injection weight gr: 49/49 Injection volume cm m³: 54/54 Spray pressure bar: 2500 Dimensions and weights Dimensions Lxwxh m: 4.7 x 1.7 x 2.1 machine weight kg: 5000 Miscellaneous 2 Component with turntable (with turntable)

Injection moulding machine 3-colours (horizontal /vertical/ and 3rd in L-position with protective enclosure) with turntable available now from our warehouse Hannover Make: Arburg Type: 420C 1000-150/150/60 Built in 2003 Control: Selogica Hours: 20092 h +Closing Unit+ Clamping force: 1000 kN / 1000 to. Tie bar ratio: 420 x 420 mm Plate size: 570 x 570 mm Injection Unit 1 (150 unit) Screw size: 15 mm (high-screw) Pvlzwy Spray volume: 17 cc Spray weight: 15 gr. Spray pressure: 2750 bar Injection Unit 2 (150 unit Screw size: 15 mm (high-screw) Spray volume: 17 cc Spray weight: 15 gr. Spray pressure: 2750 bar Injection Unit 3 (60 unit) Screw size: 15 m ...

Injection molding machine 3 colors (horizontal /vertical/ and 3. in L-position with protective housing) Pvlzwy immediately available from our warehouse in Hannover Make: Arburg Type: 420C 1000-150/150/60 year of construction 2003 Control: Selogica Hours: 20092 h +Schließeinheit+ Clamping force: 1000 kN / 1000 to. tie bar distance: 420 x 420 mm platen size: 570 x 570 mm Injection unit 1 (150 unit) Screw size: 15 mm (high shut-off fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar Injection unit 2 (150cc unit) Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure ...

Production year: 2006 Injection unit: .../150-150 Screw diameter: 30 / 30 mm Injection volume: 77 / 77 cc Injection weight: 72 / 72 g Tool closure system: 200/... Clamping force: 200 t Distance between tie rods: 570 x 570 mm Tool height: 400...1050 mm Ejector stroke: 225mm On the photos shown, the peripherals are not always included.

Clamping force: 200 t Year of construction: 2002 Injection weight in PS: 72 / 45 g Control type: Selogica Injection unit: .../150 / 150 Screw diameter: 30 / 25 mm Injection volume: 77 / 54 ccm Injection weight in PS: 72 / 45 g Clamping unit: 200/... Clamping force:: 200 t Light tie bar distance: 570 x 570 mm Ejector travel: 225 mm General information: Weight: 8000 kg Dimensions (m) LxWxH: 5.1 x 1.8 x 2.2 m • 2 x hydraulic core pull • 1 x Air Valve Snail: Top/Vertical: 30mm Bottom/Horizontal: 25mm

 ...

• more information

Clamping force: 200 t Year of construction: 2006 Injection weight in PS: 72 / 45 g Injection unit: .../150 / 150 Screw diameter: 30 / 25 mm Spec. Spray pressure: 2000 / 2500 bar Spray volume: 77 / 54 ccm Injection weight in PS: 72 / 45 g Clamping unit: 200/... Clamping force: 200 t Size of clamping plates: 795 x 795 mm Lights spar spacing: 570 x 570 mm Tool installation height: 300 mm Aperture travel: 650 mm Max. plate spacing: 950 mm Ejector travel: 225 mm General information: Delivery Time: Natychmiast Dimensions(m) LxWxH: 5.50 x 2.08 x 2.45 m Equipment: 3 x Hydraulic Core Pull 4 x Air Valve 2 x Thermoregulators Snail: upper/vertical 30 mm Bottom/Hori ...

Arburg 470C 1500-150/150 / 2K machine / machine in very good technical condition Year of construction: 2005 Injection unit: Screw diameter: 25 mm Injection weight: 49 g Injection pressure: 2500 bar Dosing volume: 54 ccm Clamping unit : Clamping force: 150 t Tie bar spacing: 470x470 mm Size of clamping plates: 685x685 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: 2K Machine Euromap 67 Robot Interface Air valve x 1 Hydraulic core pull x 1 Injection unit hardened - Bimetal Proportional valve on the injection unit – precise injection Type of injection unit: Vario - This offers the possibility to use the injection unit, e.g. ...

Manufacturer: Arburg Type: 220 S 250 - 60 Year of construction: 1999 Control: Selogica Closing type: Hydraulic Closing force: 250 kN Tie bar spacing: 220 mm x 220 mm Plate size: 400 mm x 400 mm Tool height: min 150 mm Opening distance: 275 mm Plate spacing max.: 425 mm Screw: 18 mm Lifting volume: 20 ccm / 17 gram PS Injection pressure: 2500 bar general Engine: 7.5 kW Heating: 4 kW Dimensions: 2.9 m x 1 m x 1.6 m Weight: 1900 kg Screen text: German Optional extras Robot interface Air valve Hot channel integrated

Arburg 270S-400-70 (220) General information SKU: (220) Availability: In stock CTFZQ29N Year of construction: 2008 Brand: Arburg Specifications Injection weight: 17 g Clamping force: 400 kN Stand: Used Screw diameter: 18 mm Injection pressure: 2500 bar Tie bar spacing: 270 x 270 mm Clamping plate size: 385 x 385 mm Tool installation height min.: 225 mm Control: Selogica Language: English,Swedish Power: 16.4 kW Weight: 2040 kg Dimensions: 1.3 x 3.1 m Funnel: No Core Train: Yes Euromap: Yes Air Valve: Yes Heating cans: Yes