x-travel: 762 mm y-travel: 560 mm z-travel: 1020 mm control: Ultimax III taper ISO: 40 Table dimensions: 1300 x 700 mm work piece spindle speed: 30 - 4000 U/min voltage: 380 V total power requirement: 7,5 - 5,5 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

2 pieces are available CNC axis: 3 Manufacturer: HURCO BMC 2416 Controls: Ultimax 4 Table size: 760x400mm X-Y-Z: 610 x 406 x 509mm Spindle: 80-8000 rpm Tool taper: SK 40 ATC: 24, vertical ...

• more information

Max. load: 500kg, feed rate: 3-7600mm/min, rotational speed: 80-8000/min, length: 4000mm, width: 3776mm, height: 2692mm, weight: 4.15t. ...

• more information

Inv. Num. : 6222 Type: BMC 4020 Producer: HURCO Created: 2000 Parameters: Control system: UNIMAX Operating hours: 59,600 h Work table length: 1220 mm Work table width: 510 mm Minimum vertical spindle speed: 80 1/min Maximum vertical spindle speed: 8000 1/min X-axis travel: 1020 mm Y-axis travel: 510 mm Z-axis travel: 610 mm Spindle power: 15 kW Maximum tool weight: 682 kg Max. tool weight: 7 kg Machine height: 2670 mm Machine length: 3350 mm Machine width: 2320 mm Machine weight: 5600 kg Equipment: Tool clamping 2015: Spindle change

The machine is in good technical condition. Travel X x Y x Z: 1016 x 510 x 610 mm Table clamping area: 1220 x 510 mm Spindle mounting SK 40 Spindle speed: 80 - 8000 rpm. / min. Machine weight: approx. 5.6 t Dimensions lxwxh: 3.35 x 2.67 x 2.32 m Possibility of in-service inspection upon agreement. ...

• more information

Inv. Num. : 5552 Type: BMC 24 SSM Producer: HURCO Created: 2004 Parameters: Control system: ULTIMAX Work table length: 760 mm Work table width: 400 mm Spindle drive power: 7.5 kW Tool magazine: 24 pieces Speed: 80-8000 1/min Travel X-axis: 610 mm Travel Y-axis: 405 mm Travel Z-axis: 505 mm Cone: SK40 Machine height: 2650 mm Machine length: 2140 mm Machine width: 2100 mm Machine weight: 4200 kg

x-travel: 610 mm y-travel: 405 mm z-travel: 510 mm table surface area: 760 x 400 mm spindle taper: SK 40 spindle turning speed - stepless: 80 - 8000 U/min spindle drive: 7,5 kW max. torque on the spindle: max. 142 Nm feeds: 3,0 - 7600 mm/min rapid motion -longitudinal/cross/vertical: 24 / 24 / 15 m/min distance table / vertical spindle: max. 600 mm table load: 350 kg no. of tools in magazin: 24 workpiece diameter at full load: 80 mm tool length - max.: 300 mm weight of tools max.: 6,8 kg control: ULTIMAX SSM total power requirement: 18 kVA weight of the machine ca.: 4,1 t Accessories: 2 tool fixtures SK 40, 3-jaw chuck RÖHM, chip conveyor, coolant The data for this ad was created wi ...

Hurco BMC 4020 with Ultimax 4 controller, built in 2000 Machine runs well and is immediately ready for use. Travels: x-y-z. 1016mm x 508mm x -610mm Speed 8000 1/min, magazine 24 places Tool changer has been repaired and runs very well. Keyboard and trackball and touch screen new. Preparation for Lehmann rotary axis installed. (servo pack and wiring in the control cabinet) Sale free loaded onto truck Visit by appointment with us in 83558 Maitenbeth.

Description: Machine number: H-H30608 Operating voltage: 400 V Frequency: 50 Hz Connection: 25 kVA Control system: HURCO WINMAX Travel distances: X: 700 mm Y: 500 mm Z: 600 mm Tool holder: SK 40 Table dimensions: 1000 x 510 mm With 5 grooves With 24-position tool changer Spindle speed: 15000 rpm Attention: the machine vices on the clamping surface are not included in the scope of delivery Incl. chip conveyor weight approx.: 6,000 kg, Approx. Onsite Dimension. (l x w x h): 3,200 x 2,300 x 2,400 mm

CONTROLS   CNC controls HURCO WINMAX WORKING RANGE -CUBIC-   number of processing axes (excl parallel axes): 3   X-axis travel: 760 mm   Y-axis travel: 510 mm   Z-axis travel: 610 mm TABLE   table surface (left-right): 1020 mm   workpiece load (max): 1000 kg SPINDLE / HEAD   spindle revolutions (max): 12000 /min   tool fixture: ISO SK 40 AXIS DRIVES   rapid traverse: 35000 mm/min TOOL MAGAZINE   number of positions: 24 ELECTRICAL SPECIFICATIONS   total power consumption: 13.5 kW   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS &nb ...