Milling head SK40, with flange, with quill and tool clamp, swivel. good condition. Is from a CNC tool milling machine MAHO 700C, Would also have a smaller one from a DECKEL FP3A. Also with quill and clamp. Also sell other spare parts of this MAHO 700C, clamping table, control parts, motor, spindles, control panel. ...

Machine : Vert. Head Make : DECKEL, MAHO, WMW, ... Are all swivel and with quill ! A - Universal milling head, COVER, from FP3, SK40, with quill stroke 80mm, tool clamp with hydraulics and control panel. swivel, price: 1400,- B - Universal milling head, MAHO, SK40, with quill and autom. Tool clamping, swivelling, L-33cm, W-30, H-60, swivel device, flange φ approx. 250mm Price : 1600,- Would also have milling spindles - SK30 - SK40

Table clamping surface: 600 x 1100 mm traverse path x: 800 mm traverse path y: 450 mm traverse path z: 500 mm Quill stroke: by hand approximately 50 mm of spindle speeds: 63-3150 rpm stufenl feeds. adjustable: 0,1-1500 mm / min rapid traverse: x/y/z 4.5/2,6/3 m / min. Supply: 380 V, 5.5 kW space: 3000 x 2500 x 2030 mm weight: 4000 kg

Table clamping surface: 630 ø mm traverse path x: 600 mm traverse path y: 450 mm traverse path z: 500 mm Quill stroke: hand 80 mm spindle retainer: ISO 40 spindle speeds: 20-3150 rpm stufenl feeds. adjustable: 1-3000 mm / min rapid traverse rate: 4 m / min. Connection: 380V kW space: 2000 + 850 x 2000 x 2000 mm weight: 3300 kg

Stroke x: 600 mm traverse path y: 400 mm traverse path z: 400 mm spindle retainer: ISO 40 spindle speeds: 80-4000 rpm stufenl feeds. adjustable: 0,1-1500 mm / min rapid traverse: x & y/z 4/2.5 m / min. Supply: 380 V, 16 kVA kW space: 2450 x 2200 x 1900 mm weight: 2250 kg  ...

• more information

Control: HEIDENHAIN TNC 135 Handwheels in all axes Working range X / Y / Z 400 / 250 / 375 mm Speed 50 3150 RPM 205 x 800 mm clamping surface Recording ISO 40 Quill stroke 50 mm Feed X, Y 5 1000 mm / min Feed Z 5 670 mm / min Rapid traverse X, Y 2.4 m / min Rapid traverse Z 1.6 m / min Space requirement L / B / H 1860 x 2300 x 1810 mm Weight 850 kg

Control: HEIDENHAIN TNC 135 Handwheels in all axes Working range X / Y / Z 400 / 250 / 375 mm Speed 50 3150 RPM 205 x 800 mm clamping surface Recording ISO 40 Quill stroke 50 mm Feed X, Y 5 1000 mm / min Feed Z 5 670 mm / min Rapid traverse X, Y 2.4 m / min Rapid traverse Z 1.6 m / min Space requirement L / B / H 1860 x 2300 x 1810 mm Weight 850 kg

DECKEL MAHO DMU 100 T YEAR OF CONSTRUCTION: 2001 - Number of axes: 5 ( simultaneous) milling spindle - Tool holder: SK40 - Spindle drive power: 15 [kW] - Spindle speed: 20 - 12,000 [up] LINEAR ACHSEN - Travel X/Y/Z axes: 1,060 x 710 x 710 [mm] - Rapid speed (X/Y/Z) : 30,000 [mm/min] - Feed speed (X/Y/Z) : 20 - 15,000 [mm/min] SCHWENKACHSE A : SCHWENKKOPF - Travel: 90 [degrees](+/-) - Minimum resolution: 0.001 [degree] SCHWENKACHSE B : NC ROUND TABLE x 800 [mm] - Travel: 360 [degrees](+/-) - Minimum resolution: 0.001 [degree] WERKZEUGWECHSLER - Number of tools in the magazine: 32 ( 2x 16 places) table - Table size: 1500 x 795 [mm] - Loading table max. :  ...

CNC Vertical Machining Center DECKEL-MAHO Model: DMC 70V Manufacturer: DECKEL-MAHO Model: DMC 70V New in: 1999 Condition: very good, complete Technical details Table size: 900x550 mm Max. table load: 600 kg X travel: 700 mm Y travel: 550 mm Z travel: 500 mm Spindle speed: 30 000 rpm Spindle taper: HSK 50 Total power requirement: 10/15 kW Dimensions: 3900x3700x3000 mm Machine weight: approx 8000 kg

Control cabinet for MAHO 600 - MAHO had manual transmission damage and was therefore exploited. - Are also other parts in stock. Please inquire! Good condition fully functional can be visited and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article, in order to avoid misunderstandings, can be viewed before the purchase and tested under electricity. Please ask questions before buying to avoid ambiguity. For general questions or an appointment for a viewing, I can be reached at any time at the telephone number below or above. Errors in the description and prior sale excepted. VAT will be shown separately on my invoices ...