The Okuma Genos LVT300M CNC lathe shown in the picture is for sale. The machine is currently in production! It can be viewed during operation. Main parameters: -Control:OSP100 -Hydraulic chuck -Hydraulic saddle -Maximum swing: 300mm -Maximum length: 200mm -Spindle diameter: 40mm -Turret: 12

Max Turning Diameter (in): 16.14 Max Turning Length (in): 13.78 [23.63, 39.37] Spindle Nose Type: A2-6 [A2-8, A2-11] Speed Range (min⁻¹): 50~5,000 [42~4,200, 30~3,000] Standard Power (hp): 30/20 Rapid Traverse X/Z (ipm): 984/1,182  ...

• more information

Stock Number: 3789 CNC LATHE Manufacturer: OKUMA, Type: LVT 300-M - Vertical Machine NO.: 132230, Year of manufacture: 2007 Specifications: Max. swing diameter 280 mm dia. Turning length 200 mm Main engine power 22/15 kw Main spindle speed range 40-4000 rpm C axis - main spindle movement 0.001 degree Tool turret with 12 stations Driven werkzeuumdr. 40-4500 rpm Control OSP 200 Fabr. Operating hours spindle 11485 hours Accessories: Load and Unload device Tool setter Chip conveying. Cooling water system. Length: 2800 mm, Height: 2500 mm, Width: 1500 mm , Weight: 5600 kg

CNC lathe LB 3000 EX II Manafacture: Okuma Corporation Year of manufacture: 2017 Control OKUMA ... OSP-P300LA Turning diameter ... 580mm Turning length ... 950mm inclined bed Axis Y ... 120mm Spindle bore ... 91mm Tool turret ... 12/12 Axis X ... 260mm Axis Z ... 510mm Spindle speed ... 0-5000 rpm. Rapid traverse of the X axis ... 25m/min Rapid traverse of the Z axis ... 30m/min Rapid traverse of the Y axis ... 12.5m/min Axis C ... 360° Main engine power... 22kW L x W x H ... 3420 x 2041x 2444 mm Machine weight ... 6600kg The machine is in good condition, possible to test under power.

CNC lathe LB 3000 EX II Manufacturer: Okuma Corporation Year: 2017 Control OKUMA ... OSP-P300LA Turning diameter... 580mm Rotation length ... 950mm Inclined bed Axis Y... 120mm Spindle bore ... 91mm Tool turret ... 12/12 Axis X ... 260mm Axis Z ... 510mm Spindle speed... 0-5000/min. Rapid traverse of the X axis ... 25m/min Rapid traverse of the Z axis... 30m/min Rapid traverse of the Y axis ... 12.5m/min Axis C ... 360° Main engine power... 22kW L x W x H ... 3420 x 2041x 2444 mm Machine weight ... 6600kg The machine is in good condition, possible to test under electricity.

Okuma LU3000 EX-MY 2SC 950 BigBore Year of construction : 08/ 2014 Control : OSP P 300 L Suite Power on : approx. 300 h Spindle run : approx. 100 h Specifications Rotation range up to Ø [mm] 340 Vibration diameter over cross slide / bed [mm] 340/580 Travel X-axis tool carrier "A" [mm] 260 Y-axis travel tool carrier "A" [mm] 120 (+70/-50) Z-axis tool carrier travel "A" [mm] 630 1.030 Travel X-axis tool carrier "B" [mm] 160 Z-axis tool carrier travel "B" [mm] 615 1.015 Spindle: Main spindle - speed [1/min] 42-4200 Main spindle - power [kW] 22 Main spindle - torque [Nm] 427 Main spindle - bore Ø [mm] 80 Main Spindle - Nose A2-8 Feed: Rapid traverse X/Y/Z - axes [m/min] ...

Control: OSP-P200 Turning length: 1,000 mm Turning diameter: 340 mm Vibration diameter above bed 580 mm Speed: 45 – 5,000 rpm Tool turret 12 places (driven) Bar passage 80 mm Direct recording: BMT 60 Equipment: - One touch IGF -Conveyor - Touchsetter - 3-jaw chuck (SMW 315 HB) passage 85 mm - NC tailstock - Multilingual control - Coolant pump 8 bar

This Okuma LB 300 Lathe was manufactured in the year 2012. It is equipped with an Okuma OSP U100L control unit. The machine has a spindle speed of 45-3800 rpm. ...

• more information

This used 4-Axis OKUMA LB 300 MY was manufactured in 2000, featuring a CNC OSP U 100 L control, maximum turning diameter of 340mm, and main spindle big bore option. It has a rapid feed rate of 20-25 m/min for X and Z axes, and a 12 station turret with a Y-axis travel of 120 mm. The OKUMA LB 300 MY machine we have for sale has clocked approximately 3,500 cutting hours, signifying its reliability and performance. For more details, contact us.

Turning diameter: 530 mm Turning length: 1000 mm Turret positions: 12 CNC Brand: Okuma CNC Model: OSP-U100 Max. turning Ø: 530mm X-Axis:         280mm Z-Axis:         1.000mm Spindle bore:   100mm Speedrange:     4500Rpm Spindle power:  15kW ATC / revolver: 12 Speed live tools:4000Rpm Chip conveyor:  Yes  Tool eye:       Yes  Pinole taper:   5Mk Stroke pinole:  120mm Quill Ø:        90mm Length:         2.200 mm  Width:          2.000 mm  Height:       ...