Screw diameter; 110 mm Injectable volume: 4370 cm3 Injection pressure: 1815 bar Column width: 1500 x 1200 mm Mould thickness min: 700 mm max: 1400 mm Opening stroke: 1500 mm Cores: 4 Robot Interface: Yes Options: Retractable column  ...

• more information

Screw diameter; 70 mm Injectable volume / Shot volume: 1212 cm3 Injection pressure: 1877 bar Column passage / Bettween tie bar: 810 x 710 mm Mould tickness thickness: 380 mm max: 820 mm Opening stroke: 710 mm Core Pulling: 2 Robot interface: yes / Yes E67 Options:  ...

• more information

Demag Ergotech System 80/420-430 Year of Make: 2006 Injection unit: Screw diameter: 40 mm Injection weight: 205 g Spray pressure: 2020 bar Dosing volume: 231 ccm Clamping unit: Clamping force: 80 t Spar spacing: 420x420 mm Size of the clamping plates: 580x590 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC4 Additional equipment: Euromap 67 Robot interface Air Valve x 2 Hydraulic core pull x 3 Control with hot runners Hardened injection unit - Bimetal Built-in printer It is possible to change the screw diameter Dimensions: Weight: 4100 kg Length/Width/Height: 4.10x1.40x1.90 m All offered machines are started by our service technicians before th ...

B&A REF: 9164 TON: 80 SCREW DIAMETER: 40MM SHOT WEIGHT: 208 STROKE VOLUME: 231CM3 INJECTION PRESSURE: 2025AR PLATEN SIZES: 590 X 580MM DBTB: 400 X 400MM MIN MOULD HEIGHT: 250MM MOULD OPENING STROKE: 450MM MAX DAYLIGHT: 250MM EJECTOR STROKE: 150MM CONTROLS: NC4 CORE PULLING: 1 AIR VALVES: 1 MOTOR: 15 HEATING CAPACITY: 11KW SCREW DRIVE: HYDRAULIC

Demag Ergotech Compact 250-80 Year of Make: 1995 Injection unit: Screw diameter: 18 mm Injection weight: 20 g Spray pressure: 2400 bar Dosing volume: 22.8 ccm Clamping unit: Clamping force: 25 t Tiebar spacing: 280x280 mm Size of the clamping plates: 410x410 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC4 Additional equipment: Air Valve x 2 Hydraulic core pull x 1 Hardened injection unit - Bimetal Original Demag tool crane: chain, electrically controlled, 2 lifting speeds Dimensions: Weight: 2600 kg Length/Width/Height: 3.20x1.30x1.80 m Drive: Pumps/motor: 7.5 kW Heating capacity: 3.7 kW Total power: 11.2 kW All offered machines are started ...

clamping force: 600 kN injection volume: 106 cm³ screw diameter: 30 mm platen size: 590 x 600 mm Condition: used, Specification: Horizontal injection moulding machine, type: System 60/420-200 - Internat. Size specification: 600 - 200 injection unit: - Screw diameter: 30 mm - L/D - ratio: 20D - Injection volume: 106 cm³ - Injection pressure: 1995 bar - Cylinder heating: 8,3 kW clamping unit: - Clamping force: 600 kN - Max. opening stroke: 450 mm - Mould installation height: min. 250 mm - Max. platen distance: 700 mm - Mould clamping platens: 590 x 600 mm - Clear column distance: 420 x 420 mm Total machine: - Oil tank filling: 180 ltr. - Pump ca ...

Ref. no.: 17507 Manufacturer: DEMAG Year of construction: 1998 Clamping unit Clamping force: 80 ton Opening stroke: 450 mm Distance between tie bars: 370 x 370 mm Mould height min.: 200 mm Platen size (h x v): 600 x 600 mm Injection unit Screw diameter: 35 mm Injection volume: 168 cm³ Shot weight: 149 g Injection pressure: 2020 bar Measurements and weight Dimensions: 4,1 x 1,4 x 2,0 m Machine weight: 3700 kg

clamping force: -- kN injection volume: 230 cm³ screw diameter: 40 mm platen size: 475 x 475 mm Condition: used, Specification: Horizontal injection moulding machine, injection unit: - Screw diameter: 40 mm - Cylinder diameter: 40 mm - Spraying volume: 230 cm³. Clamping unit: - tie bar distance: 475 x 475 mm - Operating hours approx.: 30000 h - Air valve - Core pull - 12-way hot runner controller The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

clamping force: 800 kN injection volume: 177 cm³ screw diameter: 35 mm platen size: 580 x 580 mm Condition: used, Specification: Horizontal injection moulding machine, type: Ergotech viva 80-400 - Internat. Size specification: 800 - 400 injection unit: - Screw diameter: 35 mm - L/D - ratio: 20D - Injection volume: 177 cm³ - Injection pressure: 2387 bar - Cylinder heating: 8,8 kW clamping unit: - Clamping force: 800 kN - Max. opening stroke: 450 mm - Mould installation height: min. 250 mm - Max. platen distance: 700 mm - Mould clamping platens: 580 x 580 mm - Clear column distance: 400 x 400 mm Total machine: - Oil tank filling: 220 ltr. - Pump ...

Demag Ergotech Viva 800-400 (144) Description without funnel General Information SKU: 144 Availability: In stock Year of construction: 2001 Brand: Demag Specifications Injection weight: 205 g Clamping force: 800 kN Screw diameter: 40 mm Spray pressure: 1830 bar Tie bar spacing: 400 x 400 mm Clamping plate size: 590 x 580 mm Tool installation height min.: 250 mm Control: NC4 Language: German Power: 26.1 kW Operating hours: 70180 h Weight: 3600 kg Dimensions: 4.35 x 1.7 m Funnel: No Core train: Yes