We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
x-travel: 2000 mm y-travel: 1000 mm z-travel: 1000 mm Control: Heidenhain type: TNC 430 : spindle turning speed range: 15-1450 U/min Table area: 2300x1200 mm Spindle: 200 mm spindle stroke: 200 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Nr 3762 Maschine wurde überholt machine is retofit The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel:2300 mm y-travel:1200 mm z-travel:950 mm feed::max. 4000 mm/min spindle turning speed range:31,5 - 1.600 1/min spindle taper:SK 50 spindle drive:30 kW milling head -swivable +/-:45 ° distance spindle /table:max. 1200 mm table surface area:3000 (4200) x 1200 mm table load capacity:10000 kg Control:TNC 426 HEIDENHAIN weight of the machine ca.:38 t CNC milling machine, from 2008 with HEIDENHAIN TNC 426 control, in 2022 overhauled, 2 pcs. workbenches 2 pcs. tool cabinet lot of tools (around 140 pcs.), el. handwheel approx. 69.000h "machine on, 18.500h "spindle on" very good condition, under power in factory
This Droop & Rein FS 130 SKE Vertical Machining center was manufactured in the year 1978. It is equipped with a HEIDENHAIN iTNC 426 control unit and has 3 axis. The machine has a spindle speed of 31.5 â 1600 rpm. The machine was completely overhauled in 2022. See information about overhauling details in PDF (DE) attached. Contact us at any time for further questions.
Vertical Milling Machine Droop & Rein type FS130 Travel X 2000 mm Travel Y 1000 mm Travel Z 1000 mm Spindle SA 50 Sensitive spindle exit: 200 mm Rotation from 31,5 to 1600 RPM Table size 2400 x 1070 mm Year of construction 1976 Throat depth 950 mm Head Tilt head Spindle motor 22 kW Scale HEIDENHAIN 3 axes New electrical panel in 2006 Voltage 380 V Width 3500 mm Depth 4700 mm Total height 4500 mm Weight 26 T
x-travel: 2000 mm y-travel: 1000 mm z-travel: 800 mm spindle turning speed range: 4 Stufen von spindle turning speed range: 20 - 3150 U/min spindle taper: SK 60 + SK 50 milling head -swivable +/-: 45 ° copying travel - horizontal/cross: 300 mm copying travel face: 200 mm distance spindle /table: 200 bis 1000 mm distance spindle center to column: 1120 mm table surface area: 4400 x 1000 mm table load capacity: 8000 kp total power requirement: 30 kW weight of the machine ca.: 56 t dimensions of the machine ca.: 7,5 x 5,0 x 4,4 m Machine is in an excellent condition, continuously maintained by the manufacturer • Control D + R, extended with HSM • DROOP & REIN - copy control type kc • HF ...
Table length: 3000 mm Table width: 1250 mm Longitudinal X: 2400 mm Cross Y: 1250 mm Vertical Z: 1000 mm Positions ATC: 0 CNC Brand: Heidenhain CNC Model: TNC 415 Make Droop Rein FSM Type FSM 1255 DA 30 kc N Year 1991 HeidenHain TNC 415 Table length (mm)L = 3.000 Table width (mm)W = 1.250 Longitudinal X (mm)X = 2.400 Cross Y (mm)Y = 1.250 Vertical Z (mm)Z = 1.000 130 / Bt50 / 3150 Rpm Copy attachmentAngle + / - 45 Gr Weight 47.500 Kg Power 30 kW
FIXED BENCH MILLING MACHINE with SWIVEL VERTICAL HEAD and PRISMATIC GUIDES. Brand : DROOP & REIN. Model: FS130gku. Table: 2200 x 800 mm. Long crossbar : 1700 mm. Transverse crossbar : 870 mm. Vertical crossbar : 800 mm. Spindle taper : ISO 50. THE MACHINE IS EQUIPPED WITH A VIEWER.
X/Y/Z: 3000 mm x 2000 mm x 1200 mm. Control unit : Siemens 840D 3 axis linear slide Machine can be seen in working condition ...
Universal milling machine Ecomil 100 Heidenhain Control TNC 124 SK 50 56 shots with tools Spindle head swivel Quill extendable 700 x 2000 clamping area Control retrofitted. Feed continuously variable all axes Rapid traverses Length 3.20 m Width 2 m Height 3.50 m Weight 14 tons Spindle 20 - 1000 rpm T slots 22/42 min distance 140 mm
Table unit of a DROOP & REIN portal milling machine Clamping plate with T-slots made of cast iron steel Tabletop unit with clamping plate and very solid guideway Table clamping surface 5500 x 2000 mm Travel of the table clamping plate approx. 3100 mm Table height 1050mm Table load: max. 20 ton. Ball screw: 100 mm Thread pitch: 20 mm (single-handed) - Machining table very stable on the bed- Metal telescopic guideway cover - Comes from a DROOP & REIN portal milling machine - Table longitudinal movement via ball screw and servo motor SIEMENS- Clamping surface with 11 pieces T-slots 28 mm - Drive via servo motor SIEMENS 1FT6134-6AB71-1AG2 with encoder IC200448S/R (RN 000 B25) Total length 9500 m ...