Table dimensions 600 x 1000 mm maximum grinding length 1000 mm grinding width 600 mm distance between table and spindle center 850 mm table load 1500 kg Rapid traverse 0 - 5.0 m / min. smallest unit of feed 0.001 mm Speed 1400 rpm. grinding wheel diameter x width x bore 406 x 75 x 127 mm Active balancing system during grinding. (reading the balance of the grinding wheel during grinding and the possibility of changing the balance during grinding) Weight approx. 6750 kg Dimensions required space approx. 4560 x 3410 x 2750 mm

Table dimensions: 700x300 mm Grinding length: 710 mm Grinding width: 305 mm Max distance from the table to the spindle centerline: 500 mm Approx machine weight: 2300 Kgs Floor ocupation: 3000x1490x1930 mm Equipped with: Control: Chevalier Electromagnet: 500x260 mm New replacement spindle ...

• more information

: gebraucht : 2019 : 5538 : prompt, Zwischenverkauf v : Taiwan : 47800 € : 1 : 630 mm : 1000 x 400 mm : 1000 mm : 1000 x 400 mm : 1050 mm : 11000 mm : 5 - 25 m/min : 0 - 2250 mm/min : 0,001 mm : 405 mm : 0,001 - 0,04 mm : 675 mm/min : 0.001 mm : 1450 1/min : 3,7 kW : 1.5 kW : 1 kW : 5,6 kW : 4280 mm : 1730 mm : 2080 mm : 3500 kg : 423 kg : 670 kg : 355 x 50 x 127 mm 8", grafic NC-control on swiveling arm with touch screen for: - seletion of working mode, program creation, graphic condition control, alarm list Aut. vertical feed Servo drive for grinding wheel feed and table cross feed Hardened slide ways in all 3 axes with roller bearings Grinding wheel spindle on 4 high precision angul ...

: gebraucht : 2006 : 5539 : Mai 2024, Zwischenverkauf : Taiwan : 49600 € : 1 : 850 mm : 1000 x 610 mm : 1000 mm : 1000 x 600 mm : 1000 mm : 5 - 25 m/min : 1250 mm/min : 3 - 32 mm : 0.02 : 400 mm/min : 0.001 mm : 1450 1/min : 11 kW : 3.7 kW : 0.37 kW : 20,6 kW : 3700 mm : 4000 mm : 3250 mm : 7400 kg : 1500 kg : 1120 kg : 1500 kg : 355 x 75 x 127 mm : 3 - 32 mm/min Servo drive for grinding wheel feed, hardened and grounded slide ways Grinding wheel spindle on 6 high precision angular contact bearings Electro-magnetic chuck Coolant equiptment with aut. paper filter and magnetic separator Over the wheel automatic dressing device (with automatic compensation) Grinding wheel Grinding wheel flang ...

grinding length: 610 mm, grinding width: 305 mm, magnetic plate size: 600x300 mm, grinding wheel width x diameter: 355 mm, grinding wheel turning speeds: 1,450 rpm, rapid motion: 10 m/min, feed range: 130 mm/min, total power requirement: 5.2 kW, weight approx.: 2,700 kg, Approx. Onsite Dimension. (l x w x h): 2,500 x 1,750 x 2,150 mm

grinding length: max. 710 mm grinding width: max. 405 mm table-size: 400 x 700 mm magnetic chuck: Standard 400 x 700 mm table adjustment - longitudinal: manuell 800 mm table adjustment - longitudinal: hydr. 750 mm table speeds: stufenlos 5-25 m/min weight of the machine ca.: 3,5 t dimensions of the machine ca.: 3050 x 1730 x 1930 mm for further information please see pictures Manual available The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 68260 € : 1372.03 € : 600 mm : 600 x 300 mm : 610 mm : 600 x 300 mm : 420 kg : 700 mm : 5 - 25 m/min : 0 - 2.250 mm/min : 350 mm : 0.001 - 32 : 440 mm : 0 - 675 mm/min : 0.001 - 0.04 mm : 500 - 2000 1/min : 5,5 kW : 0.75 kW : 1.1 kW : 1.1 kW : 2710 mm : 2428 mm : 2200 mm : 3500 kg : 975 mm : 355 x 50 x 127 mm 10,4", grafic NC-control on swiveling arm with touch screen for: - seletion of working mode, program creation, graphic condition control, alarm list aut. vertical feed servo drive for grinding wheel feed and table cross feed hardened slide ways in all 3 axes with needle rollers electro-magnetic chuck coolant equiptment with aut. paper ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 112710 € : 2242.93 € : 730 mm : 1.200 x 500 mm : 1200 mm : 1.200 x 500 mm : max. 30 m/min : 3.7 kW : 27 kVA kW : 4600 mm : 3040 mm : 2200 mm : 6400 kg : 990 mm : 930 kg : 1250 kg : 405 x 50 x 127 mm : 560 mm : 0 - 2.250 mm/min : 0,001 - 32 mm : 560 mm : 0 - 675 mm/min : 0,001 - 0,04 mm : 0,001 mm : 500 - 2.000 U/min : 11 kW iSurface control with Touch screen for 3 axes fully automatic surface and plunge grinding system 10.4” TFT high resolution color control to ensure ease of operation Rough increment, finish increment, spark out (0-9 times), and automatic grinding cycle Cycle interrupt, flip over for part inspection &, final dimensions s ...

: neu : 2024 : 5550 : September 2024, Zwischenv : Taiwan : 76600 € : 1539.66 € : 600 mm : 1000 x 400 mm : 1015 mm : 1000 x 400 mm : 670 kg : 1100 mm : 5 - 25 m/min : 0 - 2.250 mm/min : 0,001 mm : 450 mm : 0.001 - 32 : 440 mm : 0 - 675 mm/min : 0.001 - 0.04 mm : 500 - 2.000 1/min : 5,5 kW : 1.5 kW : 1.1 kW : 1.1 kW : 3630 mm : 2682 mm : 2200 mm : 4800 kg : 423 kg : 670 kg : 355 x 50 x 127 mm 10,4", grafic NC-control on swiveling arm with touch screen for: - seletion of working mode, program creation, graphic condition control, alarm list aut. vertical feed servo drive for grinding wheel feed and table cross feed hardened slide ways in all 3 axes with needle rollers electro-magnetic ch ...

: neu : ca. 6 Monate ab Auftragse : 149600 € : 2977.04 € : 730 mm : 1200 x 600 mm : 1200 mm : 1200 x 600 mm : 1300 mm : 5 - 30 m/min : 0-2250 mm/min : 0,001-32 mm : 685 mm : 560 mm : 0-675 mm/min : 500-2200 1/min : 11 kW : 5.5 kW : 3.1 kW : 3.1 kW : 4790 mm : 3207 mm : 2305 mm : 8100 kg : 1150 kg : 1600 kg : 405 x 75 x 127 mm : 0,001 - 0,04 mm : 0,0001 mm iSurface control with Touch screen for 3 axes fully automatic surface and plunge grinding system 10.4” TFT high resolution color control to ensure ease of operation Rough increment, finish increment, spark out (0-9 times), and automatic grinding cycle Cycle interrupt, flip over for part inspection &, final dimensions set Wheelhead  ...