Used Good Condition Control Type OSP-P200L X axis stroke 690 mm Y-axis stroke 230 mm Z axis stroke 1.545 mm Axis C 360° Axis B 225° Max workpiece vault Ø 630 mm Max. workable diameter Ø 710 mm workable length 1.500 mm Main spindle speed 38-3,800 rpm Spindle nose A2-8 Tool magazine 20 Chip Evacuator Accessories

Okuma LT 2000 EX 2T 2M 2Y Big Bore Steuerung/ Control : OSP P 200 L , kein IGF One Touch Advance Year of manufacture / YOM : 09/ 2011 Power On : approx. 13000 [h] Spindle running time : [h] : Location: Availability /: from stock Sweden Condition / technical condition : 9 / 10 TECHNISCHE DATEN / TECHNICAL DATA: Max. turning length / max turning length : [mm] 700 Hauptspindel / Main Spindle Turning dia : [mm] 210 Max. turning dia over bed : [mm] 400 max. RPM/ spindle speed : [1/min.] 6000 Spindle bore / spindle bore : [mm] full clamping cylinder Drive power / spindle power : [kW] 22/15 max. rotation speed 6000 rpm Travel XA / XB axis : 205 mm Travel ZA / ZB axis ...

Okuma LU3000 EX-MY 2SC 950 BigBore Year of construction : 08/ 2014 Control : OSP P 300 L Suite Power on : approx. 300 h Spindle run : approx. 100 h Specifications Rotation range up to Ø [mm] 340 Vibration diameter over cross slide / bed [mm] 340/580 Travel X-axis tool carrier "A" [mm] 260 Y-axis travel tool carrier "A" [mm] 120 (+70/-50) Z-axis tool carrier travel "A" [mm] 630 1.030 Travel X-axis tool carrier "B" [mm] 160 Z-axis tool carrier travel "B" [mm] 615 1.015 Spindle: Main spindle - speed [1/min] 42-4200 Main spindle - power [kW] 22 Main spindle - torque [Nm] 427 Main spindle - bore Ø [mm] 80 Main Spindle - Nose A2-8 Feed: Rapid traverse X/Y/Z - axes [m/min] ...

The Okuma Genos LVT300M CNC lathe shown in the picture is for sale. The machine is currently in production! It can be viewed during operation. Main parameters: -Control:OSP100 -Hydraulic chuck -Hydraulic saddle -Maximum swing: 300mm -Maximum length: 200mm -Spindle diameter: 40mm -Turret: 12

Stock Number: 3789 CNC LATHE Manufacturer: OKUMA, Type: LVT 300-M - Vertical Machine NO.: 132230, Year of manufacture: 2007 Specifications: Max. swing diameter 280 mm dia. Turning length 200 mm Main engine power 22/15 kw Main spindle speed range 40-4000 rpm C axis - main spindle movement 0.001 degree Tool turret with 12 stations Driven werkzeuumdr. 40-4500 rpm Control OSP 200 Fabr. Operating hours spindle 11485 hours Accessories: Load and Unload device Tool setter Chip conveying. Cooling water system. Length: 2800 mm, Height: 2500 mm, Width: 1500 mm , Weight: 5600 kg

Description: S/N: 101671 Control:  ,OKUMA ,OSP-U100L Capacity: Swing over cross-slide mm (in.) ∅320 (12.60) Max. turning dia. mm (in.) ∅280 (11.02) Max. turning length mm (in.) 200 (7.87) Recommended work weight kg (lb) 20 (44) Travels: X-axis mm (in.) 210 (8.27) ( for machining ) ,+ 845 (33.27) (for loading/unloading parts) Z-axis mm (in.) 360 (330 up to #0074) Spindle: Spindle speed min-1 40 to 4,000, Speed range Auto 2 ranges Spindle nose JIS A2-6 Spindle bore mm (in.) ∅62 (2.44) Spindle Front bearing ID mm (in.) ∅100 (3.94) Turret: Type V12 VDI NC non-lift No. of tools 12 OD tool shank mm (in.) 25 × 25 (0.98 × 0.98) (VDI toolholder shank  ...

Description: S/N: 0156 Control:  ,OKUMA ,OSP-U100L Capacity: Swing over cross-slide mm (in.) ∅320 (12.60) , Max. turning dia. mm (in.) ∅280 (11.02) , Max. turning length mm (in.) 200 (7.87) , Recommended work weight kg (lb) 20 (44) ,  , Travels: X-axis mm (in.) 210 (8.27) ( for machining ) ,+ 845 (33.27) (for loading/unloading parts) , Z-axis mm (in.) 360 (330 up to #0074) , Spindle: Spindle speed min-1 40 to 4,000, , Speed range Auto 2 ranges , Spindle nose JIS A2-6 , Spindle bore mm (in.) ∅62 (2.44) , Spindle Front bearing ID mm (in.) ∅100 (3.94) , Turret: Type V12 VDI NC non-lift , No. of t ...

This Okuma LB 300 Lathe was manufactured in the year 2012. It is equipped with an Okuma OSP U100L control unit. The machine has a spindle speed of 45-3800 rpm. ...

• more information

This used 4-Axis OKUMA LB 300 MY was manufactured in 2000, featuring a CNC OSP U 100 L control, maximum turning diameter of 340mm, and main spindle big bore option. It has a rapid feed rate of 20-25 m/min for X and Z axes, and a 12 station turret with a Y-axis travel of 120 mm. The OKUMA LB 300 MY machine we have for sale has clocked approximately 3,500 cutting hours, signifying its reliability and performance. For more details, contact us.

Turning diameter: 530 mm Turning length: 1000 mm Turret positions: 12 CNC Brand: Okuma CNC Model: OSP-U100 Max. turning Ø: 530mm X-Axis:         280mm Z-Axis:         1.000mm Spindle bore:   100mm Speedrange:     4500Rpm Spindle power:  15kW ATC / revolver: 12 Speed live tools:4000Rpm Chip conveyor:  Yes  Tool eye:       Yes  Pinole taper:   5Mk Stroke pinole:  120mm Quill Ø:        90mm Length:         2.200 mm  Width:          2.000 mm  Height:       ...