Qty. 1 Second-hand cold rolling mill Mfc.: MCC, ABB, IMS Type: 6-Hi Cold Rolling Mill Built: 2009 Stopped: 2017 Annual capacity: 220,000 Ton/Year Annual running time (Hour): 6480 Strip Width: 800~1250 mm Thickness Entry: 1.5~3.5 mm Exit: 0.2 – 1.2 mm De-Coiler OD: 1000~2000 mm De-Coil ID: 610 mm De-Coil Weight: Max. 25 T Coil OD: 1000~2000 mm Coil ID: 610 mm Coil Weight: Max. 25 T Mill Max Speed: 1300 m/min Threading Speed: 30 m/min Main Drive Controller (3300 VAC) Mfc.: ABB ACS6000 Variable Speed Variable Voltage Xray Gauge Mfc.: IMS Germany Automation Siemens PLC/Wincc

Qty. 1 Second-hand roughing, finishing mills and special equipment Mfc.: DAVY, TMEIC, TOSHIBA, MITSUBISHI Type: 4-Hi Rev. Built: 1997 Revamped & Installed: 2008, 2011 Stopped in 7-2017 Revamped cost of USD 151.0 Mill. from 2008 up to 2011 Finishing mill equipped with CVC Roll plus Technology System Finishing mill – new hydraulic adjustment to increase rolling force to 90 MN Roughing & Finishing mills: Technology Control System (Level 1) Process Models (Level 2) for pass schedule calculation, profile & flatness control (PFC), Pacing system & Material tracking Revamped by SMS in 2011: Roughing mill: Slipper-type Spindles Product capacity: 2,000,000 ton/year Mill capac ...

IMS Mammography Giotto Image with the following device components: Tube Varian M-113 SP 0.1/0.3_Bj. 2002 Table top 18x24 and 24x30 • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and with Stretch film wrapped and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full Functionality without guarantee. • The installati ...

There are two identical presses available, max. stroke speed: 200mm/s, oil viscosity: 46cSt a 40°C, max. hydraulic/operating pressure: 25/ 210bar, weight of the half tool: 10t, pump power at 75/ 210bar: 200/ 70l/min, pump motor power: 30kW, weight: 25t. ...

• more information

Compressive force max.: 55 kN Projection: 175 mm Punching stroke adjustable: 0 - 28 mm Number of strokes at 15 mm stroke: 30 Adjustable notch stroke: 0 - 60 mm Hydraulic drive: 380 V, 3 kW Required space: 1170 x 620 x 1470 mm Weight: 930 kg  ...

• more information

Serial No.: 1704 Punching capacity: Ø 28 x 16 Available with special tools: Ø 100 x 4 Year of construction: 1997 Country of origin: Italy  ...

• more information

Number of conrods 1 Table dimensions ( x-y/mm) 850 X 550 Slide Dimensions X-Y (mm) 560 X 376 Stroke (mm) 10 - 110 Slide Adjustment (mm) 80 Light at T.D.C.(mm) 470 Strokes type Fixed Stroke per minute 60 Location Milan Italy Machine Conditions Ce Marked Model P80re Year of made 1996

Pressure:040 t throat:180 mm stroke:0 - 76 mm no. of strokes:145 /min distance table/ram, max. stroke up, adjustment up:350 mm table surface area:600 x 360 mm hole in the table:110 mm table height over floor:800 mm ram surface:270 x 175 mm ram adjustment:65 mm power capacity:2,2 kW weight:1,75 t Dimensions (WxDxH):1,1 x 1,2 x 2,1 m German Safety: permitted for manual loading:CE-sign clutch:pneumatic

Siemens motor: 1PH7224-2NF03-0FC2 overhauled Frequency converter: ABB ACS880-01-240A-5+D150+E201+P904 unused Output chokes: ABB FOCH 0260-70 unused Brake resistance: ABB SAFUR 200F 500 unused  ...

• more information

Ladies and gentlemen, We have following oil transformers in stock from years 2006 to 2015 in top condition. SERVICES: 100KVA to 3500KVA VOLTAGE: 6KV to 33 KV to 400 V or 690 V 1000 kva 20/0.4 KV 1250 kva 20/0.4 KV 1600 kva 20/0.4 KV 2000 kva 20/0.4 KV 2300 kva 12/0.4 KV 2300 kva 20/0.4 KV 2500 kva 15/0.4 also 20/0,4KV 22KV 3500 kva 30/0.4 KV 3500 kva 20/0.4 KV Other sizes and voltages also available from 100 KVA kva up to 3,500. All transformers are in mint condition and immediately available from our warehouse in 59557 LIPPSTADT. Nationwide delivery inclusive. Any further questions can be reached Mon to sat 8 am to 10 pm.