Sell Carat wall saw type W3011. Blade diameter: 300mm The machine is in good condition, functional and tested.  ...

• more information

Shaper cutters from Module 1 to Module 14 available: - different no. of teeth, different pressure anles, different profiles, bores and sizes! shaft cutters Module 1-3 = 150 Euro, 4-5 = 250 Euro, >5 = 300 Euro disc cutters Module 1-3 = 150 Euro, 4-6 = 200 Euro, 7-10 = 250 Euro, 10-14 = 300 Euro. complete list on request! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU309T740 LocationBarneveld MakeBEBA Mischtechnik TypeBM 800 Main Features MaterialStainless steel Motor3 KW Rotor70 mm Specified Features - Foam mixer Foam mixeroscillation method Rotor/Stator with pinscheck Rotor sizesdia. 70 mm InletDN25 OutletDN25 Motor3 kW 400-690 Volt With frequency controllercheck With MonopumpNetzsch NM021RY Motor0,75 kW Netzsch NM021RY Speed301 rpm Capacity40-300 Ltr/h MaterialStainless steel 1.4571 (316Ti) Information With switchgearcheck Floorspace2,5x1,2 m Total height1,1 m CEcheck Weight680 kg Extra SpecificationsWith tank: ± 200 Ltr., with jacketFoam mixersBEBA MischtechnikMixers > Foam mixersBrand > BEBA Mischtechnik What ...

General SKU420U1321 LocationBarneveld MakeMondomix TypeA05 No.1283 Pressure Working pressure8 Bar Main Features MaterialStainless steel Motor1.1 KW Rotor80 mm Specified Features - Foam mixer Foam mixercheck Rotor/Stator with pinscheck Rotor sizesdia. 80x125 mm Inlet365x310 mm Outletdia. 19 mm Motor± 1,1 kW With frequency controllercheck With pumpcheck With Lobe pumpcheck Motorcheck MaterialStainless steel 1.4301 (304) Information Mounted on wheelscheck Floorspace1,60x0,55 m Total height1,60 m Weight200 kgFoam mixersMondomix HollandMixers > Foam mixersBrand > Mondomix Holland What you can expect from Foeth: -- Machine is in working condition -- At a reduced price ...

General SKU307S484 MakeTrefa Continu Aerating Systems B.V. (NL) LocationBarneveld CEcheck TypeT250 Main Features MaterialStainless steel Motor7.5 KW Rotor168 mm Specified Features - Foam mixer Rotor/Stator with pinscheck Rotor sizesdia.168x175mm Inletdia. 25mm Outletdia. 25mm With jacketcheck Motor7.5kW 380/420 Volt With frequency controllercheck Rotor speedmax. 604 Rpm Capacitymax. 360 l/h air @ max. 10 bar MaterialStainless steel Information No.025.282 Year of construction2004 Mounted on stainless st. framecheck With switchgear(as is) Floorspace0.9x1.6 M Total height2.2 M Weight600 KgFoam mixersTrefa AeratingMixers > Foam mixersBrand > Trefa Aerating What you c ...

General SKU307S485 LocationBarneveld CEcheck MakeCampen Machinery A/S (DK) TypeAN 200500 Main Features MaterialStainless steel Motor5.5 KW Rotor240 mm Specified Features - Foam mixer Foam mixercheck Rotor/Stator with pinscheck Rotor sizesdia. 240x400mm Inletdia. 40mm Outletdia. 45mm With jacketcheck Motor5,5 kW 400 volt With Monopumpcheck MaterialStainless steel Information No.02 03 350 Year of construction2002 Mounted on wheelscheck With switch(as is) Floorspace2,4x1,7 M Total height1,9 M Weight1000 Kg Extra SpecificationsIncludes a spare mono pump Foam mixersCampen Machinery A/SMixers > Foam mixersBrand > Campen Machinery A/S What you can expect from Foeth: --  ...

General SKU317S552 MakeHaas Mondomix B.V. (NL) LocationBarneveld CEcheck TypeA-05 Pressure Working pressure10 Bar Main Features MaterialStainless steel Motor1.5 KW Rotor80 mm Specified Features - Foam mixer Foam mixercheck Rotor/Stator with pinscheck Rotor sizesdia. 80x100mm Inletdia. 15mm Outletdia. 15mm With jacketcheck Motor1,5 kW 220-240/380-420 volt With frequency controllercheck Rotor speed700 rpm With Monopumpcheck Motor0.37 kW 230/400 Volt With frequency controllercheck Speed176 rpm MaterialStainless steel 1.4404 (316L) Information No.P13920 Year of construction2003 With switchcheck Floorspace1,1x0,3 M Total height0,8 M Weight150 KgFoam mixersMondomi ...

R21746/11 HOBEMA Cross cutter Model: 101 A Built: 1969 Working width: 700 mm Availability: by arrangement with collecting cylinder Available: by arrangement ...

• more information

Milling Centre for EPS foams may be also applicable for other foams such as XPS, PUR, or other applications after conversion Platen length: 1000-1250 mm Plate thickness: 500-1250 mm Plate thickness: 40-250 mm including input and output; Unloading and stacking the plates stack Documents are available. A visit is possible after agreement at any time. Other machines and components for the production and processing of foams are available.

Seydelmann K 60 Ultra, 60 liters bowl cutter, operation via knee lever switches, separate digital display, noise protection cover, central lubrication point for knife-shaft, 2 knives speeds, 2 bowl speeds, 2 mixing speeds forward, knife head with 6 knives. The machine is immediately available and can be tested in Koblenz, Germany.